Profile MAPREDBK User manual

Suppliers to the Education Sector
Philips Screwdriver
Allen Key (supplied)
Familiarise yourself
with the contents
Check there is nothing
missing
Check you have all the
tools required
Make room to assemble
the product
Check List
Tools
Before starting to assemble this unit please read
the step by step assembly instructions carefully
MAPLE BOOKCASE
Code: MAPREDBK and MAPBLUBK
Assembly Instructions

Suppliers to the Education Sector
Components Quantity
Conformat screws 46
1/2” x 8 Roundhead screw 24
Castor lockable 3
Castor freewheel 3
Label holder 3
6 x 30 dowels 4
IMPORTANT Panels lettered for identication if
spare part is required. Please also state colour.
Panels Quantity Size(mm)
A
B
C
End 2 1055x338mm
Top 1 1170x350mm
Bottom 1 1170x340mm
Shelf 2 1139x320mm
Small dividers 13 280x155mm
Back 1 1065x1150mm
Large Dividers 2 341x280mm
D
E
F
G

Suppliers to the Education Sector
Step 1
Step 2
G
C
Secure (6) castors to Bottom C using (24) 1/2 x 8
screws into ‘Pop Marks’ - lockable to front or rear.
Insert (2) Dowels into Inner Holes in Dividers G
x2

Suppliers to the Education Sector
E
Secure 4 Dividers E and 1 Divider G to shelf D using (10)
Conformat Screws
GROOVE ON BOTTOM C ONLY.
Counterbore Holes
This Side
Step 3
D
Secure 5 Dividers E to Shelf D using (10) Conformat Screws
FACE EDGE UP
Step 4
G
D
E
FACE EDGE UP
Counterbore Holes
This Side

Suppliers to the Education Sector
Step 5
E
Secure 4 Dividers E and 1 Divider G to Bottom C using (10)
Conformat Screws
G
C
FACE EDGE UP

Suppliers to the Education Sector
Step 6
A
1. Secure Bottom C to Ends A
using (4) Conformat Screws
Locate dowels in Divider G
into Center holes in Shelves D
2. Secure Shelves D to Ends A
using (8) Conformat Screws
Step 7
D
F
BSTAND UNIT UPRIGHT
1. Slide Back F into Grooves in Ends A
PLEASE make sure the GLOSSY SIDE
is on the OUTSIDE
2. Secure Top B with (4) Conformat
Screws into Ends A
3. Peel off backing paper and stick
label holder onto Shelves D and
Bottom C
FACE EDGES UP
D
C
G
G
G
E