Progressive PA-BT1-24-2200 User manual

Input Voltage
Input Current
Output Voltage
Output Current
Capacity
Standby Power
Features
Duty Cycle
Weather Protection
Operating Temperature
Cable Length
Housing Color
Certifications
Unit Weight
Model: PA-BT1-24-2200 User Guide
110 - 240VAC (Power Cable Included)
0.5 A
24 VDC
8 A
2.2 Ah / 53 Wh
<0.1W
USB Charging Port, Overcharge Protection, Overdischarge Protection, Overcurrent
Protection, Short Circuit Protection, Battery Life Indicator
10% (2 min on, 18min off)
IP54
5° to 40°
59"
Black
IEC 62133, TUV, cUL, UN38.3
2.70 lbs

01
Warnings
•Do not use this battery in applications that will draw more than 8A
of current. Doing so will lower the voltage output of the battery and
may cause damage.
•Only use the included AC adapter for charging the battery.
•Do not open or puncture the battery. Do not use the battery if there
is any indication of damage.
•Only store and use the battery in temperatures between 0°C and
40°C. Failure to do so may result in damage to the battery.
Dimensions
1.34
7.28
Battery Dock
6.1 1.4
0.5 4.4 1.0
1.9
0.3
4.4
2.0
7.28
3.15
Battery
3.15

02
Instructions for Battery and Dock Installation
A short press of the power button will illuminate up to 4 of the indicator lights
depending on the charge level of the battery. 4 lights indicate a full charge.
The lights will turn off 10 seconds after the button is released.
Instructions for Charging the Battery
1. Insert the battery into the dock. Determine the desired placement of the
dock on the underside of the tabletop.
2. Remove the battery from the dock and attach the battery dock to the
underside of the tabletop using the included hardware.
3. Connect the dock wiring to the control box.
1. Remove the battery from the dock
2. Plug the AC charger into the battery
3. Keep AC charger connected until all 4 lights are illuminated for a full
charge.
Instructions for Battery Power Button
Note: Battery must be fully charged prior to first use.