PROLiNK BTR-1700NFC User manual

Bluetooth music receiver
With A2DP, CSR®aptX® supported and With NFCTM Fast paring and
connection.
MODEL : BTR-1700NFC
OWNERS MANUAL
1

FEATURES
aptX® codec support
NFC Quick link support
SBC codec support
A2DP Bluetooth profile supported
33 feet(10M) effective range
TOSLINK digital audio output
Audio RL audio output
8 devices ID storable
WHAT’S IN THE BOX
Main unit AC/DC adaptor 3.5mm male→male
Audio cable
3.5mm female→
Audio RL cable
2

OUTLOOK AND CONNECTORS
Front Top View
Back Bottom
SETUP YOUR BTR-1700NFC
3

4
Analogue connection
1. Connect one 3.5mm end of the include audio to headphone jacket on the
BTR-1700NFC
2. Connect the other end to an audio input on your home stereo system (3.5mm
or 3.5mm + 3.5mmm2 RCA). Consult your stereo user’s manual for more
information on how to accomplish this.
Digital connection
1. Connect one TOSLINK cable end to optical jacket on the BTR-1700NFC
(recommended)
2. Connect the other end to one TOSLINK input of your home stereo system.
Consult your stereo user’s manual for more information on how to accomplish
this.
3. Connect AC power adaptor cable to DC input jacket of BTR-1700NFC, AC
end to any AC outlet.
4. The LED light will flash once to show the unit is powered and ready for being
paired for your devices.

NFC Fast connection and Pairing of BTR-1700NFC
BTR-1700NFC is equipped with a standard NFC tag, there are NDEF
information for Bluetooth org and NFC forum defined. Before you can use
this feature, you need to check your Smartphone or tablet with NFC function
and the operational system is Android 4.1 and above.
Start the NFC function
STEP1: Check the android operational system.
Tab the “setting” Choose “about Device” Make sure android
version is 4.1 or above
STEP2: Turn on the NFC function.
Back to setting page Check NFC function Turn on NFC function
5

STEP3: Fast Connection using NFC.
Pairing First Connection, if connected
you can play music now.
TAP the Smartphone to
BTR-1700NFC
*The message will pop up
Please choose YES.
*Some device will pop up
some will not.
STEP4: Disconnected your device and BTR-1700NFC.
If you want to disconnect, you need to tap the Smartphone to BTR-1700NFC again.
Then the connection between BTR-1700NFC and your device will off.
6

PAIRING YOUR BTR-1700NFC FOR NO NFC DEVICE
iPad/ iPhone/ iPod touch
1. Go to Bluetooth manager of your iPad/ iPhone/ iPod touch by the
following steps.
a .From your iPad/ iPhone/
iPod touch home page, tap
“setting”
b. Inside Settings tap on
“General”
c. Inside General tap on
“Bluetooth”
2.Turn On the
Bluetooth function.
4. Enter “0000” when the
player asks for PIN code
(some devices have no
need to input PIN). This
will allow the iPad/ iPhone/
iPod touch to pair with
“Music Receiver”
3.Your iPod/ iPhone/
iPad will auto
searching available
device. You will see
“Music Receiver”
then Tap on it.
7

5. Your iPod/ iPhone/ iPad connected to
BTR-1700NFC Now. And you can play
music from your iPod/ iPhone/ iPad.
Android Phone/Tablet（ver 4.0 as Example）
1. Go to Bluetooth manager of your smart phone by the following step
c. Bluetooth is turned on
a. From your smart phone
home page, tap on
“setting”
b. Inside the setting, turn
on The Bluetooth
8

4. Once paired, the blue LED
light on the BTR-1700NFC
will flash once. The Blue
LED will keep lighted
when a connection is
established
And In your Smartphone
there is showed
“connected to media
audio”
2. Searched Bluetooth
Devices will show
up, please tap on
“Music Receiver”
3. Enter “0000” when
the player asks for
PIN code（some
devices have no need
to input PIN）.
Note:
Some devices, such as iPhone, will connect immediately after pairing
so the LED will ON. Other devices, such as notebook, may ask you if
you wish to connect and LED will go off after pairing until a connection
is established.
Although the BTR-1700NFC can only play music from one device at a time,
it is capable of being paired to up to 8 devices. It means that you have to
enter the PIN code once for each device.
You can play the music now. Just play music on your device as you normally
would and the sound will come out from your stereo system.
Note: the effective range of BTR-1700NFC is 33 feet (10M) (light of
sight). If you hold and wear the Smartphone or tablet and cover the
Bluetooth antenna, the distance will be shorter.
9

10
Reconnecting your device
If you move out of range or turn off the Bluetooth feature on you iPad/
iPhone/ iPod touch or Smartphone, BTR-1700NFC will disconnected from
your device. To reconnect, simply open the Bluetooth manager and tap on
the “Music Receiver”, then you do not need to input PIN again, the
connection will be done automatically.
Adding a new phone or tablet：
If you want to switch from one device to another, please follow these
steps,
1. End the existing Bluetooth connection with connected device.
2. The BTR-1700NFC can now be connected with another device such as iPad/
iPod/ iPhone or Smartphone or tablet.
3. Follow the section “Pairing the BTR-1700NFC” to connect a new device.
Out of range or lost signal:
When the paired phone or device away from receiver (33 feet) or there
is something blocking the Bluetooth signal. The LED light will go off, it
means the connection between device and BTR-1700NFC is lost. To avoid
a lost connection:
1. Move the music device back into range (within 33 feet), and make sure there’s
a clear line of sight and there are no obstructions between BTR-1700NFC and
device.
2. Within 15 seconds, the connection will automatically be reestablished and
LED will turn on
3. If the connection is lost for more than 15 seconds, you need to reconnect the
device and BTR-1700NFC again. Please follow the “Reconnect Your Device”
section.

INDICATION OF LED
Indication Meaning Description
Flash once 1 sec per
5 secs Power on / Pairing Waiting for connection
Permanent Lighted Connected Device and main unit
are connected
TROUBLE SHOOTING
You can solve your problems from this section
No music out from my stereo speaker
Make sure the BTR-1700NFC is powered.
Make sure an audio cable or an Optical cable is correctly and firmly
connected to BTR-1700NFC.
Make sure that the audio source selection of your amplifier is correct
with your audio connection (analogue audio or TOSLINK)
Make sure the volume of the stereo is set to a comfortable listening
level.
Make sure you are within range.
Make sure the Bluetooth function is opened on your device.
Make sure you are playing the music from your device.
11

12
SAFETY WARNINGS
BTR-1700NFC requires full connection and both hands to install.
Do not use BTR-1700NFC near water (for example, a bath tub, wash
bowl, kitchen sink, laundry tub, wet basement, swimming pool, or other
areas located near water).
Clean with dry cloth.
Unplug the BTR-1700NFC before cleaning.
Install BTR-1700NFC far away from heat sources.
Use only the attached accessories.
Unplug the BTR-1700NFC when unused for long time.
***aptX®software is copyright CSR plc or its group companies. All rights reserved. The
aptX®mark and the aptX logo are trademarks of CSR plc or one of its group companies and
may be registered in one or more jurisdictions.
** This device supports Near Field Communication (NFC) technology as specified by the
NFC Forum.
“The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United
States and in other countries.”
FCC statement：
***This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause
undesired operation.