Turning the device On/Off
Hold down the power button until the Promate logo appears on
the screen. Wait for a few seconds, after the system startup is
complete then enter into the main interface.
Hibernate
Once booted up, a short press of power button will put the
lumiTab to hibernate state. During hibernation, lumiTab’s screen
will turn off and enter into the standby condition, where it will
consume only a small amount of power. Another short press of
power button will bring the lumiTab out of hibernation and you
can continue with your operation.
Shutdown and forced shutdown
If you are not using the lumiTab for several days, we recommend
you to shut down the machine. Hold down the power button for
two seconds, and select "Power off" from the pop-up window
"Tablet options" to completely shut down the lumiTab.
In case of a system crash where the lumiTab stops responding to
commands, please hold down the power button for 10 seconds or
more and select “Reboot” from the pop-up window to force shut
down.
Projection
Turn on the projector switch. Adjust the focus slider to get the
sharpest projection images. (The best projection distance is about
160cm.)
During projection, short press the power button to turn off screen
to extend the battery life.
Instructional Usage
5
