Protel Lewitt MTP 940 CM User manual

Lewitt MTP 940 CM Condenser Performance Handheld
Microphone
For Live Sound and Recording
20 Hz to 20 kHz Frequency Response
3 Switchable Polar Patterns
48V Phantom Power
3-Step High-Pass Filter
3-Step Pre-Attenuation Pad
LED Indicators for Microphone Status
Gold-Plated 3-Pin XLR Connector
Shock Mount is Included
Carrying Pouch is Included
What's in the Box
Lewitt MTP 940 CM Condenser Performance Handheld Microphone
MTP 40 MCs Shock Mount
DTP 40 LB Pouch
Limited 2-Year Warranty
Specs
Lewitt MTP 940 CM Specs
Operating Principle Acoustical: Pressure gradient transducer, externally polarized
Directional Pattern Cardioid, wide cardioid, supercardioid
Frequency Range 20 Hz to 20 kHz
Sensitivity 10 mV / Pa (-40 dBV), cardioid
Signal to Noise Ratio 85 dB-A
Equivalent Noise Level 9 dB-A, cardioid (IEC 61672-1)
Dynamic Range Mic Amp: 135 dB-A
Maximum SPL for 0.5% THD 144 dB, 0 dB pre-attenuation
150 dB, 6 dB pre-attenuation
156 dB, 12 dB pre-attenuation
Pad Pre-Attenuation: 6 dB, 12 dB, switchable

Bass Cut Filter Slope:
12 dB / octave at 80 Hz
12 dB / octave at 160 Hz
Impedance Rated: < 150 Ω
Rated Load Impedance: > 1000 Ω
Supply Voltage 48 V +/- 4 V (IEC 61938)
Current Consumption 5.5 mA (IEC 61938)
Connector Gold-plated 3-pin XLR
Dimensions (Diam. x H) 2.0 x 7.2" (51 x 183 mm)
Weight 11.7 oz (332 g)
Packaging Info
Package Weight 3.85 lb
Box Dimensions (LxWxH) 9.8 x 8.3 x 4.3"