Proteus PTP01 User guide
PTP01
Portable Storage Trolley
Original
Instruction Manual
Version B
2
Version BMinicam Proteus
PTP01 – Portable Trolley
Portable Storage Trolley PTP01 is designed to allow for the mobile oper-
ation of the PROTEUS
™
Inspection System in dicult to reach areas, such
as inside
buildings, or other locations a distance away from your vehicle. The
compact space-saving design accommodates the Digital Control Unit (not
shown below), Battery Pack (BPP24), Accessory Case and 100m Motor-
ised Cable Reel (RMP100) or 200m Motorised Cable Reel (RMP200) or
200m Manual Cable Reel (RAP200), making the whole PROTEUS
™
inspec-
tion system highly portable.
3
Version B Minicam Proteus
A Cable reel link cable for (Minicam Part No. LCP1.5).
B CCU location pins
C Battery pack link cable (Minicam Part No. ASS-002-974).
D Keyboard support.
E Battery pack xing brackets.
F Accessory box tray.
G Cable reel (RMP100/RMP200/RAP200) xing locations.
Connections and Descriptions
A
C
G
D
E
E
G
F
B
4
Version BMinicam Proteus
Control Unit
1 Position the CCU by aligning the location aper-
tures (x) on the back of the CCU over and down onto
the CCU location pins (B).
Battery Pack
1 Attach the xing plates (y) to the back of the bat-
tery pack using the nuts and bolts provided.
2 Align the xing plates to the xing brackets (E).
3 Secure the battery pack in place using the nuts
and bolts provided.
Accessory Box
The accessory case supplied with your PROTEUS
™
inspection system
should be positioned into the accessory box tray (F).
Cable Reel RMP100-RMP200
1 Position the cable reel onto the bottom section of the trolley.
2 Align the hole at the base of the brake side of the cable reel with the
hole in the cable reel xing bracket (G). Align the hole at the base of the
opposite side of the cable reel with the cable reel xing bracket (Gi) for
RMP100 or (Gii) for RMP200.
3 Secure the cable reel to the brackets using the nuts and bolts
provided.
• See page 6 Portable Storage Trolley Equipped
Information and Care
Maintenance
Ensure that trolley frame and wheels are free from debris and dirt.
*When purchased with a system
Equipping PTP01 Portable Storage Trolley
The PTP01 Portable Storage Trolley is delivered fully equipped* from the
factory. Should you need to remove, then replace any of the equipment,
please follow the instructions below.
(x)
(y)
5
Version B Minicam Proteus
PTP01 Portable Storage Trolley Equipped
A Digital Control Unit
B Accessory Case
C Battery Pack (behind Accessory Case)
D Cable Reel
A
D
B
C
Version BMinicam Proteus
6
Technical Details - PTP01
Product ID: PTP01
Dimensions: 650 x 1150 x 720mm (Wx H x D)
Weight: 9.75Kg (21.5lb) Unladen
NOTES
Version B Minicam Proteus
7
DESIGN
1220
©2020 Minicam. All rights reserved Specifications subject to change without notice
Minicam is a Halma Company.
Minicam Ltd
Unit 4, Yew Tree Way,
Stonecross Park,
Golborne,
Warrington,
WA3 3JD
United Kingdom
Tel: +44 (0)1942 270524
Email: in[email protected]
www.minicamgroup.com
Minicam Proteus
8
Version B
