Prowise iPro Wall Lift User manual
Luchthavenweg 1B, 6021 PX Budel, The Netherlands | +31 (0) 495 49 71 10 | [email protected] | www.prowise.com
KvK: 52893766 | BTW: NL850652443B01 | IBAN : NL73 INGB 0006113198 | BIC : INGBNL2A
Contents
Contents 2
Introduction 3
Eerste kennismaking 4
Scope of delivery 5
Guidelines for the installation of the Prowise iPro Mobile Lift 6
Safety requirements 7
Guidelines for use 7
Product specifications 8
Get started 10
Initialising the lift 10
Lift usage 11
Moving the lift 12
Cleaning the lift 13
Defects 13
User manual
iPro Mobile lift
2
Introduction
The Prowise iPro Mobile Lift adds value to your classes and makes your touchscreen even more innovative
and accessible for all. Operating the system with your foot and Prowise Central ensures that you can direct
your undivided attention to the screen. This lift system is the safest in existence. And in this combination,
it is a pioneer on global scale.
This manual has been created based on the current technical specifications of the lift. We are continuously
developing our lift systems, which means that we reserve the right to implement potential technical
modifications.
User manual
iPro Mobile lift
3
Eerste kennismaking
Easily adjust the height of your touchscreen by using the Prowise iPro Mobile Lift.
Adjustments up/down
The wheels are always locked, unless the lift is in its lowest position. This means that the lift can be moved
only when it is in its lowest position.
User manual
iPro Mobile lift
4
Scope of delivery
Check the delivery for completeness. Should component parts be missing, please contact our service desk
within five (5) days. The contact information for our service desk can be found on our website,
www.prowise.com. Please keep your serial number and a copy of the invoice readily available.
1. Prowise iPro Mobile Lift
2. AC connection cable
3. VESA clamps (2 units)
4. Assembly bag:
a. M8x20 hex bolts (4 units)
b. M5x25 hex bolts (2 units)
c. Assembly Guide
d. Safety Guide
5. AC extension cord for touchscreen
User manual
iPro Mobile lift
5
Guidelines for the installation of the Prowise iPro Mobile Lift
Only Prowise or a partner certified by Prowise is authorised to install and mount the touchscreen on the
Prowise iPro Mobile Lift. Prowise is not liable for damages and/or trauma caused by assembly carried out
by a third party. The warranty will lapse if the lift or the touchscreen are installed or assembled by third
parties.
- The maximum load of the Prowise iPro Mobile Lift is 110 kg.
- The power supply must be provided with voltage overload protection and an available current of
6A.
- Connect the power cord to a earthed socket with AC 100-240V~50/60Hz only. Consult your energy
company if you are unsure about the power supply at the installation site.
- Use only the connection cord and plug supplied.
- Read the safety instructions before assembling the Prowise iPro Mobile Lift.
User manual
iPro Mobile lift
6
Safety requirements
Please read the supplied Safety Guide before installing and using the Prowise iPro Mobile Lift. Please
follow warnings and instructions closely and always keep the Safety Guide and Assembly Guide at hand.
Guidelines for use
The Prowise iPro Mobile Lift has been designed such that it can be used and maintained safely. Activities
that are not described in the user manual, may only be conducted by professionals. The Prowise iPro
Mobile Lift is not suitable for use in the open air or an environment that has a high explosion hazard.
Warning!
- It is crucial that anyone connecting, installing or using this lift, has access to the necessary
information and this user manual.
- Follow the assembly instructions to avoid potential injury.
- Only connect the Prowise iPro Mobile Lift to a grounded outlet with AC 100 - 240V, 50 - 60Hz.
- Do not place liquids on or around the lift.
- Never open the electrical component box. By doing so, the user can be exposed to lethal electrical
shocks. The electrical components must not be serviced by the user.
- Always unplug the power cord during thunderstorms. In relation to extra safety measures we
recommend to use a surge protector to protect the connected touchscreen from damage caused
by voltage peaks or lightning strikes to the electricity network.
- The maximum load of this lift amounts to 110 kgs.
- The lift is not suitable to be used by young children or minors without supervision. Do not use the
lift for playful purposes.
- Caution! The risk of becoming stuck is always present, and unavoidable due to the functioning of
the lift.
User manual
iPro Mobile lift
7
Product specifications
Ensure your touchscreen is always positioned at the right height and move it to
your desired location using a mobile lift.
PW.1.21003.0002
Suitable for
All Prowise touchscreens,
maximum dimensions VESA mount 800 x 600 mm
Dimensions ground surface (WxDxH)
690 mm x 690 mm x 160 mm
Maximum load
110 kg
Speed of the lift
38 mm/s
Power
100-240V AC 50-60Hz (universal)
Stand-by power consumption
0,1 Watt
Duty cycle columns
5%
Soft-start and soft-stop
Yes
Noise level
Low, standard < 55 dB (A)
Protection against overload (EOP)
Yes
Columns with integrated anti-collision sensors
Yes, PIEZO™ sensors
Material
Steel/ABS
Colour
Steel = RAL 9005 / ABS = RAL anthracite/black
Keyboard storage (option)
Yes, with the Prowise iPro Keyboard Tray for storing
your keyboard, mouse and other accessories.
Touchscreen control via Prowise Central
Yes, USB connection
User manual
iPro Mobile lift
8
Foot controller
Yes
Wheels
Double safety wheels, 100mm, made of polyamide
Certifications
CE
Warranty
5 year
Gross weight
64 kg
Net weight
55 kg
Dimensions of the total packaging (WxDxH)
887 mm x 712 mm x 1140 mm
User manual
iPro Mobile lift
9
Get started
When the iPro Mobile Lift has not been used for an extended period of time, it needs to be initialised.
The pillars are provided with a PIEZO™ sensor. This ensures that the upward and downward
movement of the lift comes to an automatic halt once an obstructing object is detected.
The lift will automatically move in the opposite direction. The system also increases the
personal safety to some extent, but does comply not with legislation regarding personal
safety.
Initialising the lift
Initialisation of the height movement of the lift
- Place the lift in the lowest position by pressing the down button of the handheld or foot control
panel.
- Once in the lowest position, again press the down button and continue to hold the button until
the lift has moved automatically a further 3 mm and then withdrawn. This takes no longer than 5
seconds.
- Release the down button only when the lift has come to a complete standstill.
- If the down button is released before the lift has stopped, initialisation will be interrupted and the
process must be restarted.
- The columns are now initialised and ready for use.
If the down button is released before the lift has stopped, initialisation will be interrupted
and the process must be restarted.
Initialising regularly improves the durability of the lift system.
User manual
iPro Mobile lift
10
Lift usage
The motion area must be free of obstacles. Ensure that objects or
body part cannot get trapped between another object and the lift
or the touchscreen.
The lift is equipped with anti-collision sensors that automatically
stop it from moving once it is in collision with an obstruction. This
prevents damage to the lift and the touchscreen mounted upon it.
CAUTION! This is not a person protection feature.
Set the touchscreen to the desired height by pressing the up or
down buttons on the foot control panel.
Or set the touchscreen to the desired height or
inclination by using the lift control panel in Prowise
Central.
CAUTION! This application is only supported in
Prowise touchscreens in which Prowise Central has been
integrated.
User manual
iPro Mobile lift
11
Moving the lift
Take the following guidelines into account when moving the Prowise iPro Mobile Lift:
- Set the lift in the lowest position and ensure that the screen is in a vertical position so that it can
be moved.
- Roll up the power cord to ensure it is not dragged across the floor or is left in the lift’s walkway.
This mitigates the danger of stumbling as well as damage to the connecting cable.
- Make sure that no objects are left or persons are within the lift’s walkway.
- At least two people should be on hand to move the lift.
- Only move the lift over a stable, flat surface.
- Ensure that the lift does not come into collision with anything while being moved. This prevents
damage to the lift, the touch screen attached to it and the surrounding area.
- The lift must be initialised after being moved. This prevents damage and extends the lifespan of
the lift.
User manual
iPro Mobile lift
12
Cleaning the lift
Ensure that the cleaning of the lift is conducted by an adult. Children are only allowed to clean the lift
under supervision. The cleaning and disinfecting agents must never be too alkaline or acidic (pH 6 to 8).
Never apply the cleaning agent directly to the lift; always use a cloth. Preferably clean the lift with a dry
cloth.
Defects
It is important to always consider safety during a malfunction of the lift. Servicing a dually-isolated
product requires extreme care and expertise of the system and can only be conducted by a Prowise
professional or Prowise-certified partner. Replaced components must be identical to the original parts.
A defect can have various causes. In case of a defect, try the following:
- Check if all the cables are connected
- Initialise the lift (see page 9, "Initialising the lift")
- Unplug the cord from the outlet for 2 minutes and reconnect.
If the defect remains, please get in contact with the Prowise service desk via [email protected] or
0800-5021. Write down the following details:
- Name lift (see type bar)
- Serial number (see type bar)
- Type of defect/malfunction (potentially attach a picture)
Position type bar Type bar
User manual
iPro Mobile lift
13
Other manuals for iPro Wall Lift
2
Table of contents
Popular Outdoor Cart manuals by other brands
Altrad
Altrad Fort E-PowerBarrow Series Safety & Operating Instructions
Vestil
Vestil ALL-T-D6W-1000 manual
DECK DOLLY
DECK DOLLY AutoConnect JD 7 Series Assembly instructions
Forest-Master
Forest-Master ZERO BARROW manual
Meganex
Meganex MEG51 instruction manual
Thule
Thule Chariot Sport 2 Instructions for use
