Proxicast ANT-130-005 User manual

ANT-130-005
Ultra Low-Profile 2.4/5.8 Wi-Fi Omni-Directional Antenna
- 1 of 5 -
Data Sheet: Rev C 08/10/20
© Copyright Proxicast, LLC. All rights reserved.
Disclaimer: Subject to change without notice
www.proxicast.com •1-877-777-7694
• Kiosks
• Vending Machines
• Digital Signage
• Point-of-Sale Terminals
• Vehicles
• Video Surveillance
• Covert Installations
• Extremely Low Profile ~ 0.6 in. high x 1.8 in dia.
• Hole / Screw Mounted
• Weatherproof, Compact & Light-weight
• Vandal Resistant –no exposed cable
• RP-SMA Male Connector
• Compatible with 2.4 & 5.8 GHz Wi-Fi Systems
• Compatible with most 802.11 a/b/g/n/ac Access
Points & Routers
Part No. Description
ANT-130-005
Proxicast Ultra Low-Profile
Wi-Fi Omni-Directional
2 dBi Screw Mount Antenna
with 6 ft coax & RP-SMA male
This extremely low profile (< 0.6 inches tall) fixed mount omni-directional antenna provides 2 dBi of gain and
works on all 2.4 & 5.8 GHz Wi-Fi frequency bands worldwide.
Permanently mounts via a 1/2 in. (12 mm) hole with locking internal nut. Resists vandalism with no exposed
coax cable. Includes low-loss coax fed through center mounting post.
Designed for applications requiring an inconspicuous low-profile external antenna such as kiosks, vending
machines, equipment panels, conference rooms, etc. Can also be vehicle mounted for buses, vans, trucks or
other mobile installations.
Integrated Reverse Polarity SMA male plug connector mates with RPSMA female jack on access points,
routers, etc.
For MIMO applications mount 2 or more identical antennas at least 5 inches apart.
This antenna is also available for Cellular frequencies (3G/4G/LTE). See ANT-120-003.
General Description
Ordering Information
Product Features
Applications

ANT-130-005
Ultra Low-Profile 2.4/5.8 Wi-Fi Omni-Directional Antenna
- 2 of 5 -
Data Sheet: Rev C 08/10/20
© Copyright Proxicast, LLC. All rights reserved.
Disclaimer: Subject to change without notice
www.proxicast.com •1-877-777-7694
Parameter Rating
Frequency Range
2.4 & 5.8 GHz
Peak Gain
2 dBi
VSWR
≤1.5:1
Input Impedance
Input Impedance
Polarization Type
Max Input power
Ground Plane
Input Impedance
50 Ohm
Polarization Type
Vertical
Max Input power
50 W
Ground Plane 8 inch (20 cm)
diameter min. unless wall
mounted using included bracket.
50 Ohm
Polarization
Vertical
Max Input Power
20 W
Ground Plane
Not Required
DC Grounded
No
Parameter Rating
Connector Type
Reverse Polarity SMA (RPSMA) Male (plug)
Cable Length
6.7 ft (2 m) of low-loss RG316 coax
Mounting
Screw Mount via 0.5 inch (12mm) hole
Dimensions
0.59 in (15 mm) High
1.8 in (46 mm) Diameter
Materials
Radome: UV stabilized ABS plastic
Connector: Brass
Mounting Post: Brass
3M Adhesive Pad
Antenna Color
Black
Weight
1 oz (28 g) excluding coax
Operating Temperature
-30°C to +75°C
Operation of this device outside the parameter ranges given above may cause permanent damage.
Mechanical Specifications
Electrical Specifications

ANT-130-005
Ultra Low-Profile 2.4/5.8 Wi-Fi Omni-Directional Antenna
- 3 of 5 -
Data Sheet: Rev C 08/10/20
© Copyright Proxicast, LLC. All rights reserved.
Disclaimer: Subject to change without notice
www.proxicast.com •1-877-777-7694
Horizontal (Azimuth) Plane
Vertical (Elevation) Plane
VSWR
Radiation Patterns

ANT-130-005
Ultra Low-Profile 2.4/5.8 Wi-Fi Omni-Directional Antenna
- 4 of 5 -
Data Sheet: Rev C 08/10/20
© Copyright Proxicast, LLC. All rights reserved.
Disclaimer: Subject to change without notice
www.proxicast.com •1-877-777-7694
Dimensions in millimeters
Product Images
Mechanical Dimensions

ANT-130-005
Ultra Low-Profile 2.4/5.8 Wi-Fi Omni-Directional Antenna
- 5 of 5 -
Data Sheet: Rev C 08/10/20
© Copyright Proxicast, LLC. All rights reserved.
Disclaimer: Subject to change without notice
www.proxicast.com •1-877-777-7694
• Position away from:
oCRT/TVs
oLighting fixtures
oMotors
oOther wireless devices
oLarge vertical metal or concrete objects
oLow-E or tinted/coated windows
• Drill a 0.5 inch (12 mm) diameter hole in a horizontal flat surface
• Remove mounting nut & washer and feed coax cable through hole
• Remove bottom plastic liner to expose adhesive
• Press antenna into hole and tighten nut & washer from underneath
• Optionally apply a thin bead of silicone caulk around the antenna rim
Contact Information
For the latest specifications, additional product information, worldwide sales and information about Proxicast:
Web: www.proxicast.com
Tel:
1-877-777-7694
Email: [e-mail]
1-412-213-2477
Proxicast • 312 Sunnyfield Drive, Suite 200 • Glenshaw, PA 15116 USA
For technical questions and application information:
Email: [e-mail]
Important Notice
The information contained herein is believed to be reliable. Proxicast makes no warranties regarding the information contained
herein. Proxicast assumes no responsibility or liability whatsoever for any of the information contained herein.
Proxicast assumes no responsibility or liability whatsoever for the use of the information contained herein. The information
contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is
entirely with the user. All information contained herein is subject to change without notice.
The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent
rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. Proxicast products are not warranted or authorized for use as critical components in medical, life-saving, or
life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Installation Instructions