Psion NEO PX3004 User manual

The Quad Docking Station can be fixed to the optional
Wall Mount Bracket (model PX3014), or to another surface,
by two broad-headed screws.
Contents of the box:
Features: Front, Back, And Ports
The Quad Docking Station
This Guide Power cord
(dependent on country
and order)
Docking connectors (quantity 4)
Charging compartment (quantity 4)
ISO9001Certified
QualityManagementSystem
AC/DC adaptor
Ethernet connector DC In connector
Mounting The Quad Docking Station
Mounting screws (quantity 2)
Mounting holes (quantity 2)
Getting Started
Over
Insert one or more NEO hand-held computers.
4
Allow the NEO computers to charge for three hours
before first use.
Note: Use only the universal AC power
supply approved by Psion Teklogix for
use with the Quad Docking Station.
Note: Full battery performance is only reached after
the first few charge/discharge cycles.
3 h
0 - 40 °C
32 - 104 °F
1
Connect the Docking Station to external power.
Mount the Quad Docking Station.
Connect the Docking Station to an Ethernet network.
3
2
10 or 100base-T
Ethernet connector
Power
cord
The Ethernet connection in the Quad Docking Station
NEO hand-held computers
(up to 4)
Internal Ethernet connection
Quad Docking Station
Ethernet hub
10 or 100baseT Ethernet
Rubber feet (quantity 4)
Note: The position of
the mounting holes is
indicated by markings on
the front and sides of the
Quad Docking Station.
Slide NEO into the Docking
Station until it latches.
Power adaptor
DC input connector
AC outlet
PX-3004
QuadDocking Station
Quick Start Guide
Ethernet connector
Link LED Speed LED
Power indicator
USB to Ethernet converter (4)
Note: During charge, the LED indicator on
NEO is YELLOW until charging reaches 75%.
Between 75% and 95% the indicator flashes
GREEN slowly, and, above 95%, the indicator
is GREEN continuously.
Drain holes (quantity 4)
Insert the screws into the holes on the base of the unit, then
slide the unit towards the back to secure it.
Note: The power indicator glows green
when the Docking Station is connected
to external power. Power indicator
November14, 2008
PN:8000177.A
neo_quad_dock_qsg.indd 1neo_quad_dock_qsg.indd 1 14/11/2008 16:30:4014/11/2008 16:30:40

ISO 9001 Certified
Quality Management System
Quick Start Guide
Rev.A
Psion Teklogix and NEO are trademarks
of Psion Teklogix Inc. Other product
names mentioned in this document are
trademarks or registered trademarks
of other hardware, software, or service
providers and are used herein for
identification purposes only.
Location Guide For Mounting Screws
23.0 cm (9.10 in)
6.40 cm (2.51 in)
3.50 cm (1.38 in)
28.8 cm (11.3 in)
1.90 cm
(0.750 in)
Outline of
Quad Docking Station
Mounting holes
Rubber feet
Quad Docking Station
™
PX3004
3.50 cm (1.38 in)
4.75 cm
(1.87 in)
7.50 cm
(2.95 in)
1.90 cm
(0.750 in)
13.3 cm
(5.24 in)
35.8 cm (14.1 in)
The mounting screws on the shelf are M4 x 6mm panhead screws.
Front of
Docking
Station
Dimensions Of Mounting Screws
1.05 cm (0.41 in)
0.45 cm (0.18 in)
0.4 cm (0.16 in)
0.65 cm (0.26 in)
Maximum diameter of screw head:
Maximum diameter of screw shaft:
Maximum height of screw head:
Maximum height between screw
head and mounting surface:
8000177
November 14, 2008 PN: 8000177.A
8000177
neo_quad_dock_qsg.indd 2neo_quad_dock_qsg.indd 2 14/11/2008 16:31:0614/11/2008 16:31:06