PT W41036 User manual

OWNER'S MANUAL
WARNING: READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS
AND WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO SO
MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND
WILL VOID WARRANTY.
3/4 TON ENGINE
LEVELER
Stock Number W41036
LIMITED WARRANTY
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These
warranties give specific legal rights. Except where prohibited by local law, the law of the State of Washington
governs all warranties and all exclusions and limitations of warranties and remedies. There may be other rights
which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal
use and service. A defective product may be returned for a free replacement within 90 days from the date of
purchase, provided that product is returned to place of purchase immediately after discovery of defect. After 90
days and up to one year from date of purchase, PERFORMANCE TOOL® will replace at no charge any parts which
our examination shall disclose to be defective and under warranty. These warranties shall be valid only when a sales
receipt showing the date of purchase accompanies the defective product or defective part (s) being returned. For
part (s) after 90 days, please remit your request, postage prepaid to:
PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be
replaced under normal use and service. These warranties shall not apply to any product or part which is used for a
purpose for which it is not designed, or which has been repaired or altered in any way so as to affect adversely its
performance or reliability, nor shall these warranties apply to any product or part which has been subject to misuse,
neglect, accident or wear and tear incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in
connection with its products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes no
express or implied warranties of any kind with respect to its products. In particular, PERFORMANCE TOOL® makes
no implied warranty of merchantability and no implied warranty of fitness for any particular purpose, except that for
goods purchased primarily for personal, family or household use and not for commercial or business use,
PERFORMANCE TOOL® makes an implied warranty of merchantability (and, if otherwise applicable, an implied
warranty of fitness for a particular purpose), but only for the particular qualities or characteristics, and for the
duration, expressly warranted above.
The laws on limitation of implied warranties may differ from state to state, so the above limitations may not apply in
all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in any
manner related to any product, or to the design, use, or any inability to use the product. The sole and exclusive
remedy for a defective product or part shall be the repair, or replacement thereof as provided above. The laws on
limitation of remedies or on consequential, incidental or special damages may vary from state to state, so the above
limitations may not apply in all cases.
© Copyright 2020 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138

1. Visual inspection shall be made before each use of the engine leveler, checking for
cracks, cracked welds and missing and /or damaged parts. Any engine leveler that
appears to be damaged in any way shall be removed from service immediately
2. BECAUSE OF THE POTENTIAL HAZARDS ASSOCIATED WITH THE MISUSE OF
EQUIPMENT OF THIS TYPE, NO MODIFICATIONS SHALL BE MADE TO THE PRODUCT.
3. Periodic lubrication of engine leveler will ensure smooth operation. Apply grease to
bushings and threaded shaft.
MAINTENANCE & INSPECTION
2 3
Capacity ................................................................................1,500 lbs. (680 Kilo)
Product Dimensions.................................... 2.6 x 18.4 x 7.2 in. (22 x 104 x 8 cm)
Weight ........................................................................................2.2 lb.(5.420 Kilo)
Support Screw Travel..................................................................12 in. (30.48 cm)
SPECIFICATIONS:
Specifications are subject to change without notice.
This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and
troubleshooting steps described within to ensure your safety and satisfaction. The contents of this instruction manual are
based upon the latest product information available at the time of publication. The manufacturer reserves the right to
make product changes at any time without notice.
SAFETY GUIDELINES / DEFINITIONS

WARNING: Read and understand this entire instruction manual before attempting to assemble, install,
operate or maintain this product. Failure to comply with the instructions may result in serious personal
injury and/or property damage! The following signal words are used to emphasize safety warnings
that must be followed when using this product.

DANGER: Indicates an imminently hazardous
situation that, if not avoided, WILL result in death
or serious injury.

WARNING: Indicates a potentially hazardous
situation that, if not avoided, COULD result in
death or serious injury.

CAUTION: Indicates a potentially hazardous
situation that, if not avoided, MAY result in minor
or moderate injury.

NOTE: Indicates important information, which
if not followed, MAY cause damage to
equipment.
WARNING! Failure to read, understand and follow these warnings may result in engine
leveler failure resulting in death, personal injury and/or property damage.
WARNING! Do not overload engine leveler beyond 1,500 lbs. Overloading can cause damage to or
failure of the engine leveler.
WARNING! Always use engine leveler in conjunction with crane or overhead hoist having a load
capacity of at least 1 ton (2,000 lbs.) Always use lifting device on hard, level surface capable of
sustaining the load.
WARNING! Boom and load must be in lowest possible position before moving. Move load slowly and
smoothly to avoid uncontrolled swinging and possible loss and load.
WARNING! Never leave suspended load unattended.
WARNING! Never work under load.
SAFETY INFORMATION
Read these safety warnings before operation.
REFER TO VEHICLE MANUFACTURE’S APPROVED SERVICE MANUAL FOR PROPER
ENGINE REMOVAL/INSTALLATION PROCEDURE
1. Attach engine leveler to crane or overheard hoist.
2. Attach angled brackets to engine head bolts, intake or other suitable position. Bolts
must be long enough to thread into engine block to a depth of at least 1/2 in. Make sure
all connections are tight before proceeding.
3. Raise engine leveler enough to remove slack from chains. Lower and adjust chains if
necessary.
4. Raise engine enough to check balance. Turn adjusting handle to balance engine if
necessary.
5. Refertovehiclemanufacturer’sapprovedservicemanualforproperengineremoval
procedure. Slowly raise engine, using adjusting handle to guide engine up and out of
engine compartment.
6. Secure engine to engine stand or suitable stand configuration. Never leave engine
hanging from lifting device.
OPERATION INSTRUCTIONS
TOOL FEATURES
4
1
3
TOOL FEATURES
3. Three Mounting Positions
4. Angled Brackets
1. Adjustment Handle
2. Load Bushings (*Grease)
2