Pulsar XLITE WIRELESS User manual

XLITE WIRELESS SOFTWARE
USER MANUAL
사용설명서 | 使用説明書
English
한국어
日本語
..............2
..............14
.............26

Mouse Key Setting
DPI Setting
Macro Setting
Language setting
Info
battery status
Restore
Export the profile
Import the profile
2. English

Debounce Settings
Adjust the mouse's debounce time.
Debounce time is basically an amount of time that the switch
doesn’t register another click.
A higher debounce time prevents double clicks, but increases input
delay.
Adjustable from 0 to 30ms (milliseconds).
Profile Setting
Open the profile list and select the profile to set. You can save and use
up to 4 profiles.
A
A
B
B
3. English

125Hz
250Hz
500Hz
1000Hz
Profile1
Profile2
Profile3
Profile4
C-1
C-2
D-1
Key Description
Polling Rate
Changes polling rate in loop
125Hz-250Hz-500Hz-1000Hz.
D-2 Profile
Changes Profile.
D
D-1
D-2
D-2
Key Setting
First, check the number of the button you want to change.
1. Left click
2. Right click
3. Wheel button
4. Side button 1
5. Side button 2
Select the button you want to change and set the desired key.
C
C-1
C-2
4. English

Fire Key
(in-game function) Fires a bullet repeatedly at a set interval (ms).
The number of shots can be set from 0-3.
If set to 0, the shot will continue to fire while the button is pressed.
The speed can set (3-255) in millisecond.
D-1 Key combination
you can set the key from 1 key to a maximum of
3 combinations.
DPI1
DPI2
DPI3
DPI4
D-3
D-3 D-4
D-1 Disable
Deactivating the key.
D-5
D-1 Macro
Select already made macro.
D-6
D-1 DPI
Change DPI in Loop (4 stage) and you can set this in
DPI page.
D-7
D-5
D-4
D-6
D-7
5. English

Multimedia
You can set it as multimedia key shortcut.
D-8 DPI Lock
DPI can shift to selected DPI and stay while you are press holding
the key.
You can choose from 100~1100dpi and this function is useful
when playing FPS game in Sniper mode.
D-9
D-8 D-9
6. English

E
DPI Settings
DPI Stages
Up to 4 Stages.
DPI Select
You can select DPI by clicking DPI1, DPI2, DPI3, DPI4. Selected DPI is in red color.
E-1
E-2
E-2
E-1
7. English

DPI Input
You can either use scroll bar to adjust DPI or Double Click the number
to pop up the window and type in your desired DPI.
E-3
E-3
E-3
8. English

DPI Light Color Setting
Double click the color box to change the color of the LED.
E-4 DPI Eect
You can choose from 3 eects (steady, breathe, O)
If you choose steady, you can adjust the brightness.
If you choose breathe, you can adjust the speed.
If you turn o the LED, the battery will last longer.
E-5
E-5
E-4
9. English

F
USB Polling rate
Choose polling rate.
LOD
LOD = Lift o distance
LOD is a sensor detecting distance. If you set 1mm, the sensor will
detect lift up to 1mm height from the surface.
F
GH
G
Ripple control / Angle snapping
• Ripple control : Line smoothing in order to reduce jitters.
•Angle snapping : Predicts when you want to draw a straight line and
then corrects your mouse movements so it goes in a straight line.
H
10. English