Pulsar APXV3 WAX User manual

Thank you for purchasing the Pulsar®APX Wax V3!
In order to ensure safe use, please read all instructions
and safety warnings before operating. Failure to follow
instructions may result in injury and may void your warranty.
PU-0276-20
PulsarVaporizers.com
FEATURES
Pure Quartz Cup Chamber
Triple Quartz Coils
Enhanced LED Display
2-Click Hands-free Power Mode
TECH SPECS
Size: 32mm x 23mm x 94mm
Input: DC 5V/1.0A
Battery Capacity:1100mAh Class A Lithium Battery
Atomizer Resistance: 0.7Ω
Battery Recharge Cycle Count: 300
Full Metal
Mouthpiece
Triple Quartz
Coil Atomizer
Pure Quartz
Chamber
5-Click ON/OFF
Power Button
Powerful
1100mAh Battery
MAKE
CLOUDS
LET’S

CHARGING THE DEVICE
• IMPORTANT: You will need to fully charge your Pulsar®APX Wax
prior to use. Allow approximately 3 hours for the rst full charge.
NEVER charge the device for more than 24 hours.
Allow approximately 1.5 hours for additional recharges.
• A 5V/1.5 Amp USB AC wall adapter is required for charging the
device. Using the included USB-C charge cord, set the Pulsar APX
Wax on its side while charging. Do not let the unit dangle from the
cord. This puts pressure on the charger plug which can result in the
unit not charging fully. It is also recommended to NEVER charge
the device from an automobile or laptop power source. Failure to
follow warnings contained within this manual can result in property
damage or personal injury and may void the warranty.
• The APX Logo LED will show a charging connection is made by
slowly ashing red until fully charged. The indicator will change to
solid green when completely charged.
• The device will deliver approximately 1.5 hours of continuous
power, depending on use.
• Battery level display:
- Green APX Logo = 100-60% Power Level
- Orange APX Logo = 60-20% Power Level
- Red APX Logo = 20-0% Power Level
• Low Battery: APX Logo LED will ash alternating red & green 3
times and the device will not power on.
HOW TO LOAD & OPERATE
1. Turn the unit on by pressing the button rapidly 5 times.
2. The atomizer can be loaded either prior to heating or
after the coils have been warmed.
3. Do not overll. ¼ gram max product is suggested.
4. Press and hold power button or 2 rapid clicks for hands-free power
mode.
5. Once your concentrate melts (around 5 seconds), inhale.
6. Turn the unit off by pressing the power button rapidly 5 times.
ATTENTION! Do not touch the coils with metal dab
tools while the power button is engaged.
PRO TIPS
• Before using the APX Wax, rst fully charge the unit, and then heat the
empty atomizer several times. This will burn off any impurities collected
during manufacturing.
• To load the atomizer, you can place your concentrate directly on the cool
quartz coils, prior to heating; or you can prime your coils by gently pre-
heating them, and placing your concentrate on the slightly warmed coils.
• Once loaded, begin heating, and observe the vapor amount inside the
glass chamber to gauge the size cloud you would like to inhale.
• Always allow unit to reheat for 5 seconds after the coils have cooled.
HOW TO CLEAN THE MOUTHPIECE
The metal mouthpiece on the top has a friction t and can easily be
removed by pulling it away from the vape body with light force.
1. Pour enough isopropyl alcohol into a soaking container to
cover the metal mouthpiece.
2. Place the mouthpiece in the container with isopropyl alcohol
for one hour.
3. Remove and wipe with a cleaning wipe.
4. Rinse in cold water and dry with a hand towel or paper towel.
HOW TO CLEAN THE COIL CHAMBER
These steps can be performed while the mouthpiece is soaking.
1. With mouthpiece removed, hold vape battery with attached coil
upside down and power the unit on to heat up and remove any
residual product in the coil chamber.
2. Let the unit cool.
3. Use an alcohol lled cotton swab or lightly dip a dry cleaning swab
in 91% isopropyl alcohol.
4. Use the swab to wipe the outside and rim of the coil chamber
without touching the heating elements.
5. Unthread and remove the coil from the vape body.
6. Use the cleaning swab to wipe the 510 threading of the vape body.
7. Re-assemble vaporizer.
CLEANING NOTES
• Do not use cleaning solutions, solvents, or other chemicals when
cleaning the device. Doing so will result in undesirable tastes or
smells and can cause potential health hazards.
• It is a good idea to clean the unit after each use to avoid excessive
build-up, which will interfere with the taste and function of the device
and may affect warranty status.
IMPORTANT SAFETY WARNINGS
• Do not expose to extreme temperatures or direct sunlight.
• Do not drop the device or accessories.
• Do not drop or submerge in any liquid.
• Do not modify the electronics in any way.
• This device is intended for adults only. Do not sell or provide to
minors. Keep all parts, concentrates, herbs, and liquids away from
children and pets. This is not a medical device and is not intended
to diagnose, treat, mitigate, cure, or prevent any ailment, disease,
or other conditions. Consult a physician before use, especially if
you suffer from heart disease or any other medical condition, or if
you are pregnant or breastfeeding. Failure to follow any of these
instructions could result in product damage, property damage,
personal injury, and may void warranty.