Purafide XP280 User manual

XP280 Instruction Manual
Remove Filter From Plastic Bag
Before Powering The Unit On.

Table of Contents
Product Description & Controls
1
Safety precautions
3
Important Matters
4
Working Principle
4
Before Use
5
Instructions
5
Product Configuration and
6
Parameters Maintaining
6
Troubleshooting
9
6
* Remove the filter from plastic bag before turning on the power

Product Description and Controls
1 2
D
LIGHT
LOCK
2
3
5
A Control button B Air outlet Grill
F Air quality indicator
C Fuselage D Power Cord
G Air inlet Grill
1 Filter reset 2 Light on/off 3
Fan speed adjustment + Auto mode
4 Child lock 5
Power on/off

Safety Precautions
Before using the product, please read the instruction carefully.
For your safety, this product conforms to the standards and regulations (Low Voltage,
Electromagnetic Compatibility, Environmental Protection).
Without supervision this product is not suitable for people with physical, sensory, or mental
disorders (Including children), or those who lack experience or knowledge in using it, unless
supervised by those responsible for their safety or given prior instructions on machine use.
Children should be taken care of to ensure they do not play with this product.
Do not use this product if the power cord is damaged. If the power cord is damaged, to
avoid danger, it must be replaced.
Children must not clean and maintain the product without supervision.
When servicing this product, refer to the “Maintenance” section of the manual.
Keep the
power cord out of reach of children under the age of eight.
This product is designed for indoor use and should not be used in industrial applications.If
the product is damaged due to improper operation, the warranty is invalid.
Do not operate the product in extreme dusty, humid, or hazardous locations.Always ensure
that the electrical plug and power cord are good before use. Do not insert foreign objects
into the device.

Do not pull on the power cord or equipment or pull cord to unplug the plug from the outlet.
Important matters
 Do not cover the air inlet or outlet.
 For safety avoid touching the appliance when wet.
Do not allow any liquid to enter the unit.
Do not use this product in an extreme damp location.
Do not place this product close to extreme heat sources (fireplaces or radiators)

Do not place anything on the unit or insert any foreign objects into it.

When the product is not used for a long time: Turn off the device and unplug the power cord
using the button (6).

Turn off the device and unplug it before moving.
Unplug the device when assembling or cleaning the device.
Working Principle
This air purifier filters large particles of dust, hair, PM2.5, allergens, and removes odors to protect
your health and family.
Pre-filter + H13 HEPA Filter
3 4
●
●Secondhand smoke
●Tiny Particles (PM2.5)
●Pollen
●Mites
●Allergen
●Bacteria/Virus

Before Use
Select the room where you need to purify the air and place the purifier on a stable
floor or countertopin the room.
To allow free circulation of air, avoid placing the purifier behind the curtains, next to the
furniture or shelves, and near any obstacles. Keep at least 10 inches of free space on
each side of the purifier.
o
The voltage of your home matches the voltage of the unit.
oYour device can be connected to a grounded power plug. This device is a
Class II appliance
o(double insulated).
oKeep the air inlet and outlet completely unobstructed.
oEnsure the filter and the rear casing are properly installed (see below).
oIf the filter door is not properly installed, the unit will not work properly.
oFollow these instructions the first time you use the filter and each time filter is
replaced after the life of the filter expires (Figure 1-6)
Instructions for use
Power
Turn the purifier on or off .
After turning on, the sensor system will take 30 seconds to initialize prior to provide
the first reading of
the air quality. The indoor air quality indicator's color will
change based on the sensor's reading
.
Child Lock
When the unit is on, press this key for 3 seconds, and the system switches between
the locked and unlocked states. The other functions are locked after the child
lock is engaged, the lock button for 3 seconds to unlock all functions
.
Press the power button to turn
unit on/off.
Use your hand to remove the
back cover from the
main
housing.
Remove the filter
with the pull tabs.
Filter reset
When the service life of the filter expires, the filter reset button flashes red,
prompting to replace the filter; after the filter is replaced, long press this
button to turn off the red light and reset the filter life.
Light
Press “Light” button, for the air quality indicator light to turn on/off.
Fan speed adjustment + Auto mode
Press the fan speed buttonl to adjust the speed from low, medium, highand
Auto functions in turn; In Auto mode, the unit's fan speed automatically adjusts
according to the air quality, and enters the auto mode by default after starting.
Remove new filter from the
plastic bag
Install filter (without the
plastic bag) back into the
unit.
Install the back cover back in
its original placement/position.
Your unit is now ready to be
used.
5 6
6
5
3 2
Color air quality
Blue
Very good
Green Good
Red Poor

Product configuration and parameters
Rated voltage: 120V/60Hz
3
Rated power:
65W
Material quality: ABS
Maintenance
Always turn off the power to the unit by pressing the Power button
(5) before
performing any maintenance operations. You can clean the product body with a
slightly damp cloth.
Filter replacement
The recommended filter change frequency will vary depending on the duration
of use and the operating environment. The corresponding indicator will
illuminate when the filter needs to be replaced.
Storage
When not using the purifier for a long time, store it in a dry, cool place.
Troubleshooting
Do not disassemble the machine yourself; improper repair may cause danger to the user and
could void the warranty!
Before contacting the after-sales service center, please check the following
troubleshooting table:
Malfunction Examination Approach
Will not start
Is the power plugged in?
Plug in the power supply at the correct
voltage.
Are the indicators not lit? Plug in the power supply at the correct
voltage.
Is there a power outage? Press the switch button to select the function.
Is back cover snaped in? Device is available when power is restored.
Airflow is greatly
weaker than
before
Does the filter need to
bereplaced?
Clean the pre-filter monthly by vacuuming it
clean or removing it to clean with soap and
water. Make sure it is COMPLETELY dry
before reattaching to the HEPA filter.
Check if the filter has reached the
replacement
cycle and replace the filter if
necessary.
There is odor
at the air
outlet
Does the filter need to
bereplaced?
Fan speed cannot
be changed
automatically
Is it manual mode? Choose the right mode of operation.
* It is important that the pre-filter is cleaned monthly.
Note:
*The H13 HEPA filter cannot be cleaned or reused. Do not wash them.
*To replace the filter in sequence, please refer to “Before Use”. “First-time use of the
filter to remove the filter and replace the filter after the filter has expired”.
Filter Operating Frequency
Pre-filter,
Anti-bacteria cloth,
H13 HEPA filter.
Clean
Replace
Monthly
Every 2 Years
(or 17,500 run hours)
IMPORTANT: Do not use any abrasive material to avoid damaging the surface
of the device.

Changing filter tips
If you are allergic or have asthma, avoid prolong contact with used filters.
Wear gloves when replacing the filter and wash your hands after replacement.
7 Put the used filter into a sealed bag and throw it away to avoid the spread of contaminants. 8

9 10