Pure Acoustics SBW-175 User manual

www.pure-acoustics.com
Model #SBW-175
Wireless Bluetooth Surround Bar & Subwoofer
User manual
&
Safety Guide

www.pure-acoustics.com
Thank you for choosing Pure Acoustics. We hope you enjoy each and every use of this
product. We suggest that you read this user manual carefully before primary use in order to
utilize all of the features in functions installed. Please store it in a safe place for future
reference and pass it on to the next owner.
Caution & Safety Guide:
Please power off the unit when not in use. If the unit will not be in use for extended periods it
is suggested that you disconnect the unit from its power source.
To prevent damage to the unit do not install in areas of extreme heat or in areas with direct
exposure to sunlight.
Don’t install the unit in or near a place where it may come in contact with rain, moisture or
other liquids.
Install the unit on a horizontal, flat and firm surface with good ventilation. Never block the
speaker, blocking these vents may cause damage to the speaker as a result of overheating.
To clean the unit, simply wipe it down using a dry, soft cloth. The unit should never be
cleaned chemicals or detergent.
In the rear occurrence of malfunction do not attempt to repair the unit on your own. Contact
a certified service professional for a proper diagnosis and repair.
Caution: Dismantling the unit on your own is dangerous and may cause damage to your
person or property and will void the warranty.
The lighting flash is intended to alert the user to the presence of dangerous
voltage within the product’s enclosure and touching the internal components may result in
electric shock to your person.
The exclamatory mark is intended to alert the user to the presence of important
operating instructions.
To reduce the risk of electric shock or fire, do not remove the cabinet cover
simply contact a service professional.

www.pure-acoustics.com
Features:
Bluetooth - stream and enjoy music wirelessly from any Bluetooth enabled device
2.1Ch Surround Sound Bar - full range true cinematic surround sound
Wireless Subwoofer - simple one step wireless connection delivers deep wide
bass and life like sound effects
Optical Input - Digitally enhance sound effects, audio and spoken word
applications
FM Radio - Digital FM tuner with auto scan and upto 20 presets
Easy Setup - simple do it yourself plug and play connection will have you all setup
in minutes.
IR Remote Control - Full control over all modes features via IR remote control.
Main Chart of Panel
Multimedia Panel:
1.Line In
2.USB Port
3.Power Button
4.Mode
5.Volume+/Next
6.Volume-/Prev
.

www.pure-acoustics.com
Surround bar back panel:
1.DC Input
2.Optical Input
3.Wired Subwoofer Output*
4.FM Antenna
*Wired subwoofer option cannot be used simultaneously with wireless subwoofer
Front Panel:
Connections
Line In
Use the providedAUX cable (3.5mm) to direct connect Smartphones, tablets, and other
music devices.
Its corresponding signal source is LINE IN which can be available by pressing (mode) on
the side panel or pressing (AUX) on the remote control.
Subwoofer Output
Power on the subwoofer, the subwoofer is equipped with a wireless transmitter, the
manufactured default setting is set to automatically connect to the surround bar, should a
disconnect between the subwoofer and surround bar occur simply reset the connection by
switching the units off and then on again.
Bluetooth Connection
To pair the SBW-175 with your Smartphone or other Bluetooth enabled device hit mode to
enter Bluetooth mode. Enable the Bluetooth function on your Smartphone or other
bluetooth enabled device and hit scan for Pure SBW-175. When found choose it from the
list.
If prompted to input a password insert 0000, once successfully paired select the
Pure SBW-175 from the list of paired devices and select in order to connect.
Optical Input
Use the optional optical cable to connect the optical output of your television or amplifier to
the player.
Digital FM Tuner
Press the mode button until the speaker enters FM mode or press FM on the IR remote
control to tune into your favorite radio stations both indoors and out. Long press the
Play/Pause button to auto scan upto 20 preset stations. To scroll to a specific preset station
use the arrow keys while in FM mode

www.pure-acoustics.com
Remote Control
Remote Control Operation
Install the batteries into the remote control. Point the remote control at the remote sensor on
the front panel. The remote control works within a distance of about 8 meters from the
sensor and within an angle of about 30 degrees from the left and right side.
NOTE:
Remove the batteries when you don’t intend to use the remote control for a long time.
Do not mix new and used batteries, or different types of batteries.
Weak batteries can leak and severely damage the remote control.
Be environmentally friendly and dispose of batteries according to your government
regulations.
Remote Control

www.pure-acoustics.com
Troubleshooting
Issue
Possible Causes
Solution
No power
The unit is not connected to
the power supply or the
power cable is not properly
connected to the outlet.
Make sure the unit is connected to the
power supply. Try connecting the cable to
a different outlet.
No sound or distorted sound
1.The audio cables aren’t
properly connected.
2.The volume is set to the
minimum level.
3.The sound is switched off
1.Confirm that the audio cables are
connected properly in the correct inputs.
2.Turn up the Volume
3.Press MUTE on the remote control to
switch on the sound.
4.Press Play/Pause
The buttons on the unit are
not working.
The unit is being interfered
with static electricity etc.
Switch off and unplug the unit.
Then connect the plug to the power
supply and switch on again.
The IR remote control is not
functioning properly.
1.Check to make sure that
there are batteries inside
and that they installed
properly.
2.The batteries installed are
depleted and in need of
replacement.
3.The remote sensor is
obstructed or the remote
control is not pointed to the
remote sensor
4.The remote control is out
of its operating range.
5.The unit is powered off
1.Install 2 AAA/1.5V batteries in it.
2.Replace the batteries with new ones.
3.Remove any obstructions and make
sure that the remote control is pointed at
the remote control sensor.
4.Make sure the remote control is within
the operating range
5.Switch off the unit and disconnect it
from the AC outlet. Then power the unit
on again.
Technical Specifications:
Power Supply
DC 12V / 1A
Power consumption
75W
Working environment(Temperature)
-10~+35C
Relative Humidity
5%~90%
Power output(Max)
75W*2 + 75W SUBWOOFER
Frequency response
+/- 3dB (40Hz ~ 20KHz)

www.pure-acoustics.com
Once again we thank you for purchasing the SBW-175 sound bar and wireless subwoofer
system. It is our hope that you enjoy this product every time it is put to use therefore, we
suggest that you keep this user manual safe for future reference and so it may be passed on to
the next owner.
Please feel free to visit our website www.pure-acoustics.com for information on this product as
well as hundreds more
Enjoy!