
Introduction
Thank you for purchasing PureAcoustics’products, and welcome to the PureAcoustics family of satisfied customers!
Pure Acoustics was established to fulfill the need for high quality speakers of exceptional design at an affordable price. After years of
research and development, and by manufacturing all parts ourselves -- from the voice-coil to the uniquely-designed crossover -- Pure
Acoustics is able to offer you speakers of superior value.
Each subwoofer component has been designed and engineered with first-rate materials to produce exceptional sound. The sleek
cabinetry encases a deceptively powerful woofer that delivers a clear, open bass with incredibly low distortion, even at high volumes.
This subwoofer offers the best of it all – high-quality sound, hand-made solid construction, and a remarkably stylish appearance.
We welcome you to witness the results. Our team’s dedication to quality, reliability and attractive design has created some of the
best-value subwoofers you can find today.
Reading this manual fully (the complete manual) will help you to set up your subwoofer properly and reward you with a fine listening
experience. Pure Acoustics distribution centers in Europe, Asia, Australia and the Americas will be happy to assist you with any
questions you may have. Please look for the distributor nearest you on our web site, www.pure-acoustics.com.
Connections
Before you start, make sure all your equipment is switched off and the amplifier volume is on low.
Using an RCA cable, connect the Pre Out (subwoofer) on your receiver to a Y connecter. Then connect the Y Connector to the RCA
Line in on your subwoofer. Make sure the subwoofer switch is in the OFF position, rotate the GAIN control to MIN and set the FREQ
control to the middle position. Plug in the AC power cord to your electrical outlet. Turn on your amplifier and subwoofer and play
your favorite music. Gradually increase your amplifier’s volume to your desired level. Gradually increase your subwoofer GAIN
level to your desired bass level. Adjust the FREQ control to a point where the subwoofer and rear speakers perform to your satisfaction.
These adjustments are used to match the subwoofer bass reproduction with that of your main speakers. Turn on your amplifier and
subwoofer and play your favorite music. For optimal results, try a few different types of music.
Position
The subwoofer can be positioned anywhere in the room; for the best result, position it between the rear speakers or within 15ft (5m) of
the main speakers. It is best to try the subwoofer in a few places around the room and check which one gives you the best listening
experience. To avoid unnecessary vibrations, place the subwoofer on a solid surface.