Pure-Pro Bonnie User manual

PRO
P
URE
DRINKING WATE R SYSTEM
REVERSE OSMOSIS SYSTEM
Type ofproduct
Date of purchase
Name Tel
Address
PRO
P
URE
DRINKING WATE R SYSTEM
Thank you verymuch for selectingPure-Pro WaterCorp.
In order to bring the best use of your system, please read
the user's manual carefully before installation and follow
the regulations.
Memo
Bonnie
USER'S MANUAL
01 Preface /Parts
02 RO flowchart
03 Piping installation
04 Replacement offilters
05 Operation method
06 Precaution
07 Cleaning &Maintenance
08 What isreverse osmosis
09 FAQ
10 Maintenance checkinglist
11 Memo
Cold &
Hot Water Dispenser
11
PURE-PRO REVERSE OSMOSIS SYSTEM
Bonnie Built-In 4 Stage RO System
Bonnie

01
PURE-PRO REVERSE OSMOSIS SYSTEM
PRO
P
URE
DRINKING WATE R SYSTEM
PRO
P
URE
DRINKING WATE R SYSTEM
Maintenance checking list
Date
Filters
1st stage 2nd stage 3rd stage 4th stage Other items
10
PURE-PRO REVERSE OSMOSIS SYSTEM
Preface / Parts
Congratulations on your wise choosing this cold, hot water dispenser which is
suitable for home,office, factory use.
This unit is equipped an individual IC board control on cold, hot system internally
to provide thecold, hot waterin 24 hoursa day.
Toensure that thisproduct will alwaysperform at its optimum, the user is advised
to read manualthoroughly and followthe instructions beforeoperating the unit.
Bonnie Built-In 4 Stage RO System Bonnie Built-In 4 Stage RO System
Drip tray
Built-in
RO system
Water tap
Control panel
Cup storage
Specifications:
Chilling up to20 liters perhour
Heating up to10 liters perhour
RO Production: 80GPD
Input inAC 110Volt, 220Volt or
(50/60Hz).
Dimensions:
(cm) 33 (W)x 35 (D)x 105 (H)
Weight: 22.5 kgs
240Volt
Product Features:
Built-in 4 stageRO system
reddot design awardwinning product
Touchswitch interface forcold and
hot water
Safety lock forhot water
Invisible cup dispenserdirect
chill system
HEATING
CHILLING
HOT
Safety lock forhot water
Hot water switchindicator
Cold water switchindicator
Cold water pressbutton
Hot water pressbutton

02
PURE-PRO REVERSE OSMOSIS SYSTEM
PRO
P
URE
DRINKING WATE R SYSTEM
PRO
P
URE
DRINKING WATE R SYSTEM
Q: What is the guaranteeon the PurePro system ?
The PurePro system (excluding filters) is guaranteed for 1 year for material and
workmanship. All defective parts will be replaced free within the first year under
natural breakdown. The membrane has one year pro-rated guarantee.
Q: What factors affect thequantity and the quality ofthe water production?
There are four major variablesto consider:
1.Pressure-The greater the water pressure, the better water quantity and
quality it produced. Water pressure of 60 PSI is ideal.
00
2.Temperature-76 F is the ideal water temperature for R.O. 40 F water will
0
cause the production of R.O. water to fall to half of that at 76 F. The maximum
0
water temperature recommended is 85 F.
3.Total Dissolved Solids (TDS)-The higher the amount of dissolved
contaminants in the water, the lower the quantity of water produced. A high
level of TOTAL DISSOLVED SOLIDS can be overcome with additional water
pressure.
4.Membrane-Different membranes have different characteristics. Some
produce more water than others; some have better contaminant rejection
capabilities; some have greater resistance to chemical abrasion for longer life.
PurePro system includes TW30-1812-80 The Thin Film Composite (TFC)
membranes combine the best of these characteristics and are considered the
finest membrane in the world.
Q: What does the PureProseries drinking water taste like?
The taste of the PurePro water depends on the amount of contaminants in the
tap water originally. If 95% of dissolved minerals and chemicals are removed,
the R.O. water may taste like distilled water (no minerals), bottled water (low
mineral), or natural spring water(moderate mineral content).
Q: How will the PureProseries water affect mixed beverages?
Because reverse osmosis removes invisible contaminants that mask flavor, it
allows the natural taste of your beverages to come through. You will be able to
use less coffee and still get the full flavor. Concentrated beverages like orange
juice will taste tangier. You will probably be drinking a lot more water as well,
since many people drink soda, Kool-Aid, concentrated juices, and beer as an
alternative to bad-tasting tap water. Also, PurePro eliminates most of the lime
build up on drip coffee makers, preventing the need for frequent cleaning. No
longer will you find thewhite scum on the insideof pans after boiling water.
FAQ
09
PURE-PRO REVERSE OSMOSIS SYSTEM
RO flow chart
Bonnie Built-In 4 Stage RO System Bonnie Built-In 4 Stage RO System
Floating valve Water in
PP filter
Carbon filter
Drainage
Flow restrictor
RO membrane
Pure water Post carbon
Pressure storage tank
Cold water
tank
Hot water
Cold water
Vent
Hot water
tank

03
PURE-PRO REVERSE OSMOSIS SYSTEM
PRO
P
URE
DRINKING WATE R SYSTEM
PRO
P
URE
DRINKING WATE R SYSTEM
08
PURE-PRO REVERSE OSMOSIS SYSTEM
Reverse osmosis was originally designed to make sea water drinkable for the
navy. It is ideal for anyone on a low sodium diet. An R.O. membrane has a pore
size much smaller than bacteria virus, or the cryptosporidium parasite. When
functioning properly itwill remove allmicroorganisms from tapwater and produce
sterile water. Reverse osmosis is the reversal of the natural flow of osmosis. In a
water purification system, the goal is not to dilute the salt solution, but to
separate the pure water from the salt and other contaminants. When the natural
osmotic flow isreversed, water fromthe salt solutionis forced topass through the
membrane in the opposite direction by application of pressure-thus the term
REVERSE OSMOSIS. Through this process, we are able to produce pure water
by screening outthe salts andother contaminants.
What is reverse osmosis
Reverse Osmosis
Pressure
Membrane
Water flow
Piping installation
Water ininstallation method:
1.Dismantle original watertap and addtri-way socket &1/4" inlet ballvalve, see
drawing(A)
tri-way socket
1/4" inlet ballvalve
faucet
drawing(A)
2.Insert 1/4" PEpipe into 1/4"inlet ball valveand inlet connector, see drawing(B)
drawing(B)
1/4" inlet ballvalve
1/4" PE waterpipe
water in connector
drainage connector
Drainage water ininstallation method:
Insert 1/4" PEpipe into drainageconnector, andanother side putting
into drainage(do nothave any block)thencomplete drainage water
installation method.
Bonnie Built-In 4 Stage RO System Bonnie Built-In 4 Stage RO System

04
PURE-PRO REVERSE OSMOSIS SYSTEM
PRO
P
URE
DRINKING WATE R SYSTEM
PRO
P
URE
DRINKING WATE R SYSTEM
PURE-PRO REVERSE OSMOSIS SYSTEM
07
Replacement of filters
Cleaning & Maintenance
1.Please make sure the plug has
been pulled out from outlet
before cleaning the water
dispenser.
Caution: Please donot let waterseep to interiorof the unitto avoid damage.
The procedure forfilter replacement:
Open the door from right side(face the water
dispenser).
Please turn the filter by clockwise for removing
and turn the filter by counterclockwise for
installation.
Please follow below consumable filters usage
life to replace filter to assure the drinking water
quality.
a. PP filter (1) -every 6 months
b. Carbon filter(2)- every 6months
c. Ro membrane(3) - every1~2 year
d. Post carbon(4)- once ayear
Counterclockwise
to install filter
Bonnie Built-In 4 Stage RO System Bonnie Built-In 4 Stage RO System
4.Pull out water stop bolt, which
can completely drain out water
in cold water and hot-water
tanks.
water stop bolt
2.Turn offwater source.
Pressure storage
tank
RO membrane(3)
Clockwise to
remove filter
PP filter(1)
Carbon filter(2)
Post carbon(4)
3.Use screwdriver to remove the
screws on thetop cover,left and
right plate. After removing top
cover, get off the insulator
board, press cold-water and
hot-water taps, completely
drain out allwater. Itis ready for
clean.

HOT COLD
05
PURE-PRO REVERSE OSMOSIS SYSTEM
PRO
P
URE
DRINKING WATE R SYSTEM
PRO
P
URE
DRINKING WATE R SYSTEM
06
PURE-PRO REVERSE OSMOSIS SYSTEM
Operation method Precaution
1.After water-in pipingis done, plugin (be
sure each power switch on backside is
off before plug in).
The water willbe stared toproduce.
After water is full, drain out all the first
round water and clean the cold and hot
water tanks. Then need to wait for the
second round water making, after the
water is full, press the hot-water and
cold-water press button to make the
water drain out a little. After all
procedure is done, the water cooler is
ready to use.
Caution: Please check the pressure of
wate source and make sure
the water-in valvedoes open.
2.Turn on hot power switch, the heating
indication lens on front operation panel
will go on, the unit proceeds with the
heating function. After water gets hot,
the heating lenswill get off.
3.Turn on cold power switch, it proceeds
with chilling. Do not press the cold
power switch frequently. Also, do not
re-turn on the cold power switch until 8
minutes later after the water dispenser
is off. Otherwise, the unit will get
damaged.
The cold-water temperature is set at 4-
0
10 C.
Cold power switch
Hot power switch
Provide at least10cm space
between wall anddispenser.
Keep the waterdispenser
away from sunlight.
Do not putdispenser on a
place where thekids can
reach easily.
Be sure touse correct power
voltage, plug powercord
directly into electricalsocket.
10cm
Bonnie Built-In 4 Stage RO System Bonnie Built-In 4 Stage RO System