Preparations
Please remove the package and protection film on the product and plastic bag of the filter
before the first usage of the product.
Please place the device on steady and dry horizontal plane and ensure 30cm far away from other
objects. Before plug into the power, please make sure the socket and power wire satisfy the requirement
of the product.
Operation Method
Starting up: After connecting with the power, slightly touch the “On/Off” to start up the sterilizer; Touch
again the “On/Off” button turns off the device.
Air Speed: Three air speed modes “sleep, low, and fast” are designed for the device. The unit runs at
"low" speed by default after the machine is turned on. Gently press the air speed button to
change the speed of the fan.
Timer: Two options of “1 hour, 3 hours”, slightly touch “timing” button for successive choices. 1 hour
timer lets the unit runs for an hour and auto shutdown after the timer elapses.
Sterilization: After starting up, the user could slight touch “Function” button to turn on and turn off the
UV-C lamp.
Negative ion: "Negative ion” function turns ON with the unit, and turns OFF with the
unit. While the device is on, the negative ion module continuously emits 20 minutes
negative ion, then stops for 5 minutes to repeat this action again.
Air Quality Index (AQI): The device is equipped with built-in high air quality sensor that indicates the
air quality in the room. The sensor takes 2 minutes to warm up after the machine starts, during which
the air quality indicator is not bright. After 2 minutes of warm-up, the air quality indicator
automatically detects the air quality and turns ON appropriate indicator on the unit.
Automatic and manual speed control: The default setting is the “automatic speed control” mode
after the machine is turned on. In this mode, the wind speed will be automatically adjusted according to
the air quality level. The "Manual Mode" kicks in when the user tries to adjust the fan speed on the
control panel or remote. In this mode, the wind speed will not automatically adjust based on the air
quality. If it is necessary to restore the automatic speed regulation, you need to restart the machine and
then restart it.
Filter replacement warning: When accumulated operational time reaches 1500 hours, the
three indicator lights of air quality flash simultaneously, it reminds the user to replace the filter by
alarm sound of “di di di”. After the new filter replacement, push “timing” and “air
speed” buttons for 5 seconds to reset and eliminate the alarm.
Remote control: The device is equipped with infrared remote controller with effective distance of
4~5 meters. While using, it is suggested to direct to the IR receiving window on the right of the
control panel to achieve a better function.
Fragrance Box: The user can add different varieties of fragrance to the air through the fragrance
box located inside the unit. Recommended types of fragrances are bottled perfume, wood, bead,
dried flower and fluids. Tip: Soak a sponge with the desired fragrance for economical use of the
fragrance.
