Puretec Radfire RAS Series User manual

For correct operation & installation. it is essential to observe these instructions.
APR2020
User Guide
Radfire™ Portable Air Sanitiser System
RAS Series

2Installation & Operation Manual Copyright © Puretec Pty Ltd 2020
What's Inside
What's Inside
Puretec Customer Service ........................................................................................................... 2
Introduction .......................................................................................................................................... 3
Positioning The System..................................................................................................................3
Operation ............................................................................................................................................... 4
Treated Area Coverage................................................................................................................... 4
....................................................................................................................................... 4
Lamp Maintenance & Replacement Procedure ................................................................ 5
Warranty................................................................................................................................................. 6
Puretec Customer Service
proven performer manufactured from quality materials and components and will give years
of fresh air, free of impurities, if maintained and used properly.
For advice or further questions please contact your local Puretec stockist or call our Puretec
Customer Service Helpline on 1300 140 140 (Australia) or
0800 130 140 (New Zealand).
maintain optimum performance. This is a simple procedure when following instructions. For
replacements contact your nearest Puretec stockist.
Replacement lamp code for RAS-160P model : Puretec RL436-4.

3
RAS SERIES | Radre™ Portable UV Air Steriliser System
Introduction
maintaining hygienic conditions at all times is paramount like in healthcare facilities for
example.
free.
quality.
healthcare environments.
The system can be used in any areas where cross infections occur due to human
congregations during social functions and business practices.
Ideal use for:
• Pharmacies
Positioning The System
Introduction

4Installation & Operation Manual Copyright © Puretec Pty Ltd 2020
Operation
Operation
turn it on.
end of the cabinet.
Note: The glow is perfectly safe as the rays are completely contained within the cabinet.
The fan will also start operating, drawing air from one end of the unit, pushing the treated air
out of the other end.
Treated Area Coverage
One unit is recommended to treat a room/area with a cubic area of approx. 40 cubic meters.
For example:
of the room volume every hour (60 minutes). Larger rooms/areas will require multiple units
based on this ratio.
Calculation of cubic meters:
• length (m) x width (m) x height (m) = cubic meters (m); or
• length (cm) x width (cm) x height (cm) / 1,000,000 = cubic meters (m); or
• length (mm) x width (mm) x height (mm) / 1,000,000,000 = cubic meters (m).
Specications
Fan Size: 120 mm computer type
Fan Capacity: 160 m
55 dba
20W, 254 mm

5
RAS SERIES | Radre™ Portable UV Air Steriliser System
Maintenance
Lamp Maintenance & Replacement Procedure
Note: The lamp becomes hot during operation, cool the unit completely prior to replacing the
lamp.
Replacement lamp code for RAS-160P model : Puretec RL436-4
1.
2.
Note: The fan is connected to the lower cabinet, be careful not to pull on the connecting
wires.
3.
pull the lamp free from the clips.
4. Hold the end of the lamp that is connected to the 4 pin lamp holder with one hand and
the connector in the other and pull the lamp away from the connector (this will be quite
5. Remove the packaging on the new lamp. and connect the new lamp into the 4 pin
connector. Insuring the pins are pushed all the way into the connector.
Note:
6.
secure.
7. Replace the top cover and screw back into place.

6Installation & Operation Manual Copyright © Puretec Pty Ltd 2020
Warranty
Warranty
Any claim under this warranty must be made within 3 years of the date of purchase of the
product. This product is warranted to be free of defect of material and workmanship for 3
years from date of purchase. 3 year warranty is 1 parts and labour, plus 2 years parts only.
purchase to place where you purchased the product, and they will lodge a Warranty Request
with Puretec.
submit details and proof of your expense claim to place of purchase for consideration.
The warranty only applies if the product was used and/or installed in accordance with the
user guide and/or installation instructions. This warranty is given in lieu of all other express
or implied warranties and manufacturer shall in no circumstance be held liable for damages
consequential or otherwise or delays caused or faulty manufacturing except as excluded by
law.
Applicable to all above, is that the warranties need to be approved by Puretec to ensure
product was not incorrectly used, installed or claimed. False and incorrect claims will be

7
RAS SERIES | Radre™ Portable UV Air Steriliser System
Warranty
Warranty/Australia
This warranty is provided in addition to other rights and remedies you have under law: Our
goods come with guarantees which cannot be excluded under the Australian Consumer Law.
replaced if the goods fail to be of acceptable quality and the failure does not amount to a
Warranty/New Zealand
This warranty is provided in addition to other rights and remedies you have under law: Our
replaced if the goods fail to be of acceptable quality and the failure does not amount to a

This manual suits for next models
1
Table of contents
Other Puretec Accessories manuals
Popular Accessories manuals by other brands

Manitowoc
Manitowoc K00141 installation instructions

Texas Instruments
Texas Instruments SLOU061A user guide

Orbita
Orbita Rotorwind Instruction guide

Aukey
Aukey PB-Y23 user manual

Discovery Kids
Discovery Kids TDK29 instruction manual

PCB Piezotronics
PCB Piezotronics 124B23 Installation and operating manual