PURO XYGEN P500 User manual

&
purOxygen
purOxyge
P5
Smart HEPA
Air Purifier
USER’S GUIDE

3
puroxygen
P500i_
Thank you for choosing
PUROXYGEN P500i!
P500i HEPA Air Purifier cleans out the air
around you from dust, odors and more.
As indoor air is becoming increasingly
polluted, it is crucial to arm yourself with
an air purifier able to ensure proper air
cleaning.
1. Air Purifier
2. Combination Filter
3. User’s Guide

PRODUCT STRUCTURE
1. Air outlet
2. Control panel/ Display area
3. Buckle/ Handle
4. Sensor
5. Middle frame
6. Front panel
7. Air inlet
DISPLAY AND TOUCH
CONTROL PANEL
(© POWER (short press) - turn on/off the unit
(@ POWER (press for 4 sec when the unit is on) -
turn on Wi-Fi
@ SPEED - 3 fan speeds and Auto Mode
SLEEP - turn off the light and the machine
runs at low speed - low noise
TIMER - choose 1-12 hours to turn on/off
the machine
POWER+TIMER - 3sec - reset the filter's
life management function

Activated
Pre-Filter HEPA oo
20d8 35d8
Tickofthe Ambient sound of
clock baby’s sleep
[ ]
—
65d8 70dB
Office ambient Ambient sound
soun during discussion
Cold
Catalyst.
B
55d8
P500i Fast
wind speed
mode
85dB
Car exhaust
CORE FILTRATION SYSTEM
The P500i filtration system consists of 4
purification stages: pre-filter, HEPA,
activated carbon and cold catalyst.
NOISE LEVEL
While the PS00i model works at all available
fan speeds, PUROXYGEN takes care of the low
noise level in it.

PM2.5 DIGITAL DISPLAY
The PUROXYGEN P500i is equipped with the PM2.5 sensor to inform a user about
the concentration of PM in the air. The PM concentration is shown with digits and
also divided by 4-color light indications:
reen
Greer Excellent Air Quality
— Excellent Air Quality - Green light
indication
e
RN
Blue
Good AirQuality
— Good Air Quality - Blue light indication.

Yellow
Medium Air Quality
v
7
SN
Red
le— - — 2
— Medium Air Quality - Yellow light
indication.
— Poor Air Quality - Red light indication.

HOW TO START
The new PUROXYGEN P500i already comes with the combination filter inside it.
1. Open the filter cover and take off the polybag containing the combination filter.
2. Remove the combination filter from the polybag.
3. Put the combination filter into the purifier with the blue side tagged as “FRONT"
facing towards you.
4. Close firmly the filter cover.
5. Connect the power plug to a power source.
6. Press the POWER button on the purifier's control panel.
7. The purifier will start working. You will see the 30 seconds countdown, after which
the LED light indication (green, blue, yellow or red depending on the air quality) and
altering digits standing for the air pollution index will appear on the control panel.
Note:
When placing the unit, make sure to allow at least 4 inch (10 cm) clearance between
the air inlet/outlet and any obstacle.

FAN SPEEDS
The inbuilt fan can operate at 3 speeds and in Auto Mode. To change the
fan speed, use the SPEED button on the purifier’s control panel.
1 speed - 350 rpm
2 speed - 550 rpm
3 speed - 800 rpm
To enable Auto Mode, press the SPEED button on the purifier's control panel several
times until you see the “A” indication.
In the Auto Mode, the fan speed is set automatically, according to the air quality
readings obtained from the PM2.5 sensor.
SLEEP MODE
The PUROXYGEN P500i has Sleep Mode which allows the purifier to operate at the
lowest fan speed with the lowest noise emission and no LED indication.
To enable/disable it, press the SLEEP button on the purifier's control panel.

TIMER
The PUROXYGEN P500i can turn on/off automatically in a particular period of time (1-12
hours).
To enable the ON timer, when the purifier is OFF, press the TIMER button on the
purifier's control panel. Each button press adds one hour. To enable the OFF timer,
please do the same steps but when the purifier is ON.
To disable the timer, press the TIMER button on the purifier’s control panel several
times until you see the -h LED indication (for OFF timer) or until the display turns off
(for ON timer).
CHILD LOCK
You can disable the buttons on the purifier's control panel by using Child Lock.
To enable/disable it, press and hold the LOCK button on the purifier's control panel
for 3 seconds.

WI-FI CONTROL
The P500i purifier is equipped with the Wi-Fi feature compatible with almost all popular
Smart Home Kits (Google, etc.).
To start using it:
1. Download the Smart Life app using the following QR code (available for Android and
iOS) and open it:

2.Log in or Sign up to use all the 3.0n the Home tab, tap on Add Device:
features of this app:
[ ] o

4. Read the tips through (if any):
Confim hehome ot Vi1 sgna e
s 024 GHE VI requred 0008
5. Give all the required permissions to the
app:
Tips
e devs camot esd
nfomaton. Do youwor
Cancel Setiings

6. In the list on the left, select Small
Home Appliances, and in the list on the
right, select Air Purifier (Wi-Fi):
.
L om
- .
@
a
7. In the next screen, select the Wi-Fi
network you want to connect the purifier in
and enter the password to this network.
Please note that the purifier supports only
2.4GHz Wi-Fi networks, it will not connect
to the app if 5Ghz network is used:
Select 2.4 GHz etwork and
enter password.
I your WeFi s 5G4z,
Common outer setting
MERCUSYS_A30D

8. After that, when the purifier is on, 9. In the app, confirm that you entered the
press and hold the POWER button on Wi-Fi pairing mode on the purifierand, in
the purifier’s control panel until you hear the popped up window, select Blink Quickly:
the sound prompt and the WIFI LED
starts flashing:
Reset the device
Precs st RESET bton o §
koot the st bk (it o
ooy
Select th status o theincicstorightor
hebeep:
=

10. Wait until the app finds the
PUROXYGEN P500i purifier:
Adding device.
Ensuro that tha v s powared on
o5
11. Press the + button and then Done:
AddDevis
PuroRvGeN psco °
Note: Once connected, you will be able to
control the P500i purifier using not only
Wi-Fi, but also 4G/5G networks.

APP FEATURES 2.Change the mode between Manual,
Auto and Sleep:
In the app, you will be able to do the
following:
1. Power on/off the device:

3. Control the fan speed: 4. Control Child Lock and Timer:
Child lock
Schedule

5.Rename the device, link it to the Smart
Home Kits (Google, etc.) and so on:
rwonceneson . [
PUROXYGEN PS001 .
[ —
[ —
T
Note: To connect the purifier to several
devices you need to install the Smart
Life application to the second device
and log in into the same account.
MULTI-ACCOUNT CONTROL
If you want to use another Smart Life
account on another device, do the following:
1. Install the Smart Life application to the
second device.
2. Log in into the account but do not add a
new device.
3. On the first device go to PUROXYGEN
P500i, press the Edit button in the upper
right corner.
4. Select Share Device option and then Add
Sharing.
5. Send the invitation link via any suitable
messenger.
6. Open the link on the second device using
the Smart Life.
7. Accept the invitation on the second
device.
8. The purifier will be added to the list.

HOW TO CLEAN
There are several things that should be regularly (every two months) cleaned:
air inlet/outlet grills, filter + pre-filter and PM2.5 sensor.
To clean the inlet/outlet grills:
1. Turn off the unit and disconnect the power plug from a power source.
2. Wipe the grills with a slightly damp cloth or vacuum them.
To clean the filters:
1. Turn off the unit and disconnect the power plug from a power source.
2. Open the filter cover and remove carefully the combination filter.
3. Unvelcro the blue pre-filter and handwash it by using a soap or alike and let it dry.
4. Vacuum only the front side of the combination filter and put it under the direct
sunlight for a couple of hours.
5. Velcro the dried pre-filter back onto the combination filter.
6. Put the filter back into the unit and power it on.
To clean the PM2.5 sensor:
1. Turn off the unit and disconnect the power plug from a power source.
2. Open carefully the sensor cover on the right side of the unit by using a flat screwdriver
or alike.
3. Wipe the camera of the sensor and its surface by using a cotton swab.
4. Close the sensor cover.