PX BTR-1500M User manual

1
BTR-1500M
Bluetooth audio receiver
With A2DP, CSR
®
aptX
®
supported
and Multi-pairing function
Feature
◎ aptX
®
codec support
◎ SBC codec support
◎ A2DP Bluetooth profile supported
◎ 33 feet(10M) effective range
◎ TOSLINK digital audio output
◎ Audio RL audio output
◎ 8 devices ID storable
◎ Upto 3 devices connection.
What’s in the box
Main unit AC/DC adaptor 3.5mm male3.5mm female
male audio cable audio RL cable

2
Outlook and connectors
Setup your BTR-1500M
Front Top View
Back Side

3
Analogue connection
1. Connect one 3.5mm end of the include audio to headphone jacket on the
BTR-1500M
2. Connect the other end to an audio input on your home stereo system (3.5mm or
3.5mm + 3.5mmm2 RCA). Consult your stereo user’s manual for more
information on how to accomplish this.
Digital connection
1. Connect one TOSLINK cable end to optical jacket on the
BTR-1500M(recommended)
2. Connect the other end to one TOSLINK input of your home stereo system.
Consult your stereo user’s manual for more information on how to accomplish
this.
3. Connect AC power adaptor cable to DC input jacket of BTR-1500M, AC end to
any AC outlet.
4. The LED light will flash once to show the unit is powered and ready for being
paired for your devices.
Pairing your BTR-1500M
iPad/iPhone/iPod touch
1. Go to Bluetooth manager of your iPad/iPhone/iPod touch by the following steps
a .From your iPad/iPhone/iPod
touch home page, tap “setting”
b. Inside Settings tap on
“General”
c. Inside General tap on
“Bluetooth”

4
2.Turn On the Bluetooth
function
4. Enter “0000” when the player
asks for PIN code(some
devices have no need to input
PIN). This will allow the
iPad/iPhone/iPod touch to pair
with “Music Receiver”
3.Your iPod/iPhone/iPad
will auto searching
available device. You
will see “Music
Receiver” then Tap on
it.
5. Your iPod/iPhone/iPad connected to
BTR-1500M Now. And You can play music from
your iPod/iPhone/iPad.

5
Android Phone/Tablet（ver 4.0 as Example）
1. Go to Bluetooth manager of your smart phone by the following step
Note:
Some devices, such as iPhone, will connect immediately after pairing so the LED
will ON. Other devices, such as notebook, may ask you if you wish to connect
and LED will go off after pairing until a connection is established.
a. From your smart phone home
page, tap on “setting”
b. Inside the setting, turn on The
Bluetooth
c. Bluetooth is turned on
2. Searched Bluetooth
Devices will show up,
please tap on “Music
Receiver”
3. Enter “0000” when
the player asks for
PIN code（some
devices have no
need to input PIN）.
4. Once paired, the blue LED
light on the BTR-1500M
will flash once. The Blue
LED will keep lighted
when a connection is
established
And In your Smartphone
there is showed
“connected to media
audio”

6
Multipair operation
If you want to have the feature of multi-pairing, please followed the steps, the maximum
number of connection is 3.
First installation --3 devices connection
If your devices do not paired with BTR-1500M, please follow the steps.
Step1: Connect the first device as “PAIRING YOUR BTR-1500M” paragraph.
Step2: Disconnect the first device , Please turn off the Bluetooth function of first
devices
Step3: Connect the second device as “PAIRING YOUR BTR-1500M” paragraph.
Step4: Disconnect the second device, Please turn off the Bluetooth function of second
devices
Step5: Connect the third device as “PAIRING YOUR BTR-1500M” paragraph.
Step6: Turn on the Bluetooth function of first and second devices, these 2 devices will
auto connect back to BTR-1500M
Normal Operation—devices paired
If your devices are all paired before, the 3 devices connected to BTR-1500M will be
activated.
Play music
1 device connected to BTR-1500M
You can play the music now. Just play music on your device as you normally would and
the sound will come out from your stereo system.
2 or 3 devices connected to BTR-1500M
Those who play the music lately, will take the right to play( it means that the music is
came from the last device which is playing now)
Note: the effective range of BTR-1500M is 33 feet(10M).

7
Reconnecting your device
If you move out of range or turn off the Bluetooth feature on you iPad/iPhone/iPod
touch or Smartphone,BTR-1500M will disconnected from your device. To reconnect,
simply open the Bluetooth manager and tap on the “Music Receiver”, then you do not
need to input PIN again, the connection will be done automatically.
Adding a new phone or tablet：
If you want to switch from one device to another, please follow these steps
1. End the existing Bluetooth connection with connected device.
2. The BTR-1500M can now be connected with another device such as
iPad/iPod/iPhone or Smartphone or tablet.
3. Follow the section “Pairing the BTR-1500M” to connect a new device.
Out of range or lost signal:
When the paired phone or device away from receiver (33 feet) or there is
something blocking the Bluetooth signal. The LED light will go off, it means the
connection between device and BTR-1500M is lost. To avoid a lost connection:
1. Move the music device back into range ( within 33 feet), and make sure there’s a
clear line of sight and there are no obstructions between BTR-1500M and device.
2. Within 15 seconds, the connection will automatically be reestablished and LED
will turn on
3. If the connection is lost for more than 15 seconds, you need to reconnect the
device and BTR-1500M again. Please follow the “Reconnect Your Device”
section.

8
Indication of LED
Troubleshooting
You can solve your problems from this section
No music out from my stereo speaker
◎ Make sure the BTR-1500M is powered.
◎ Make sure an audio cable or an Optical cable is correctly and firmly connected to
BTR-1500M
◎ Make sure that the audio source selection of your amplifier is correct with your audio
connection (analogue audio or TOSLINK)
◎ Make sure the volume of the stereo is set to a comfortable listening level
◎ Make sure you are within range.
◎ Make sure the Bluetooth function is opened on your device.
◎ Make sure you are playing the music from your device.
SAFETY WARNINGS
◎ BTR-1500M requires full connection and both hands to install.
◎ Do not use BTR-1500M near water(for example, a bath tub, wash bowl, kitchen sink,
laundry tub, wet basement, swimming pool, or other areas located near water).
◎ Clean with dry cloth.
◎ Unplug the BTR-1500M before cleaning.
◎ Install BTR-1500M far away from heat sources.
◎ Use only the attached accessories.
◎ Unplug the BTR-1500M when unused for long time.
***aptX
®
software is copyright CSR plc or its group companies.All rights reserved. The
aptX
®
mark and the aptX logo are trademarks of CSR plc or one of its group companies
and may be registered in one or more jurisdictions.
Indication meaning Description
Flash once 1 sec
per 5 secs Power on /Pairing Waiting for connection
Permanent Lighted connected Device and main unit are connected