Pxierra Ai User manual

Quick Sta!Guide
v1.0.1 English
Floor Stand Suit
Pxierra Ai Baby Monitor
Models: TVD6003H 1.0.1 White
1

Contents
Status Reference page 2
Safety page 3
Notice page 4
Advices page 5
In The Box page 6
What prepare by yourself page 7
Let`s Get Sta!ed page 8
Installation Options page 9
Limited Warranty & Compliance page15
Status & Reference
Speaker
Reset Button
Night LIght & Status Light
Starlight Color Image Sensor Invisible Infrared Led
Mic Array
Light Sensor
Ve!ical Axis Halo Horizontal Axis Halo
Temperature & Humidity Sensor
Constant light up 10 seconds
Constant light up all the time
Constant light o"
Initial Boot Successfully
Silent Working/No Power/Net Con#g
Good Connection And Working
Night Light Controlled By APP
The Device Is Faulty
Breathing light up 5 min
$ickers intermittently
2

❗
WARNING
STRANGULATION HAZARD — Children have STRANGLED in cords.
NEVER attempt to use cord without the protective covering. Check protective covering
before each use to ensure that the cord is not exposed to your child. Immediately
discontinue use if protective covering is damaged or broken. This device is designed for
indoor use only. This device is designed to be used behind a standard crib and against
the wall only. Use only the AC power supply included with your Pxierra Ai baby monitor.
Adult assembly is required. Keep small pa!s away from children when assembling. This
product cannot replace adult supe"ision. Ensure your child’s health by checking on
him/her regularly. This product is not a toy. Do not allow children to play with it. Keep
the device and power cord out of the reach of children a minimum of 3 ft (1m) away
from the children;
Pxierra Ai Baby Monitor was created to help parents track factors that a#ect their
baby’s safe sleep and general review.This product cannot replace adult supe"ision.
Ensure your child’s health by checking on him/her regularly. It is not designed to cure,
treat, or prevent any disease or health condition, including, but not limited to, Sudden
Infant Death Syndrome (SIDS). No baby monitor can ever replace you as a caregiver, or
substitute for asking your doctor for medical advice.
Safety
3

• This device is designed for indoor use only.
• Install in accordance with building and installation codes and standards where your
baby live;
• This product is designed to be mounted behind a standard crib and against the wall
only.Do not use it otherwhere;
• This device id designed for newborn and childhood before 14 years old only;
• Use only the AC power adapter and DC cord included in the packing box;
• Keep the device and DC cord out of the reach of children and pets a minimum of 3 ft
(1m) away from the children;
• Use only in temperatures between –40°F and 113°F. Do not block ai!low to the
device;
• Never use the device near water, including near bathtub, sink, laund"machine tube,
wet basement, etc.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other
devices that produce heat;
• Please ensure that the device can be completely stationa"and not shaken during
working, and avoid touching or wind blowing which may a#ect the stable state of the
device during working;
• Only use attachments and accessories speci$ed by the manufacturer and not cover it
with anything.
• Unplug this device when unused for long periods of time;
• Do not push any objects into the openings of the device unless consistent with the
authorized operation of the device. Doing so can cause a $re or an electrical shock by
sho%ing out interior components;
• NEVER attempt to use cord without the protective covering. Do not install the
equipment in a way that stretches or squeezes the DC cord;
• Do not disassemble the device or attempt to se&ice it, it may expose you to
dangerous high voltage or other risks. Opening a sealed component or product will void
warranty.
Notice
4

Advises
•Use a !rm sleep su"ace.
•Do not put anything (pillows, blankets, stu#ed toys, or crib bumpers) anywhere
baby’s sleep area.
•Babies should not sleep in an adult bed, on a couch, or on a chair alone, with you or
anyone else.
•Babies should not sleep in swings, car seats, or carriers.
•Have your baby share your room, not your bed.
•Do not let your baby overheat during sleep.
•Do not use devices and products (wedges, positioners) that claim to reduce the risk
of SIDS/SUID.
•There is no evidence to recommend swaddling as a strategy to reduce the risk of
SIDS.
•Do not use home hea$or breathing monitors to reduce the risk of SIDS.
•Do not smoke or let others smoke around your baby.
#SafeSleepSnap
For More Information about Safe Sleep for Your Baby: Reduce the Risk of Sudden Infant
Death Syndrome (SIDS) and Other Sleep-Related Causes of Infant Death,check out:
https://safetosleep.nichd.nih.gov/resources/caregivers
https://safetosleep.nichd.nih.gov/modules/custom/sts_interactive_room/html/index.html
or Scan the QR code to obtain the content of URL:
For More Information about how to build a safe sleep environment, check out:
Source from SAFE SLEEP VIRGINIA，https://www.vdh.virginia.gov/safe-sleep/
5

Extension Tube
Base Tube
Crib Edge Grip
Monitor Mount USB Cord Baby Monitor
In the box
Power Adapter Elbow Connector
Floor Stand Leg
6

What prepare by yourself
Android Phone
/ iPhone /iPad
WiFi Router
2.4G & 5G
Tapeline
(3m/120inch)
microSDHC
UHS-I
Not be used with Rocking Crib. This is a necessa!condition for safe sleep
monitoring properly.
0-8 months：80cm(32in)
monitor to crib sheet
over 1 year old: 140cm(55in)
monitor to crib sheet
32in/55in
Do not put anything (pillows, blankets,
stu"ed toys, or crib bumpers) anywhere
baby’s sleep area.
No #ickering lights；
Stable ambient light,
so that babies have
comfo$sleep and
monitor work properly
Follow the Safe Sleep®`s
recommended way of
wearing Baby Onesies to
sleep, for safe sleep and
more e"ective moniting.
The 32GB microSDHC card can roll store for about 7 days video playback, and
the maximum capacity is 128GB, which for about 28 days video playback.Use
with microSDHC card that meet UHS-I or higher to ensure compatibility.
7

Let`s Get Sta!ed
Download the Vitaradar app and set up your account .
Follow the in-app instructions to set up your Pxierra Ai Baby Monitor .
You can choose to follow the assembly instructions in-app or in this booklet .
Search and download the Android App or iOS App VitaRadar for Pxierra Ai
baby monitor.
Need Help
suppo!@pxierra.com
Sent Email
Share your product sto"with us and your friends and family:
Video Guidance
www.pxierra.com
Earn rewards for each succesful referral Share baby sto"win a special gift
@pxierra /
@pxierrababymonitor
Sent Message
VitaRadar
!
"
8

Installation Options
Position the crib against the preferred wall with at least 5 inches (12.7cm) distance in
the nurse!. In order to obtain the best viewing angle and comfo"able use experience,
please mount up the Pxierra Ai Baby Monitor in the middle position behind the Crib, or
determine the speci#c installation position of the device through the APP live preview.
Notice: The power socket should be placed within 2m from the crib.
5 inches
9

Assemble stand, bottom to top. Follow the steps ：
MONITOR MOUNT
BASE TUBE
USB-A
ELBOW CONNECT
EXTENSION TUBE
EXTENSION TUBE
FLOOR STAND LEG
CRIB EDGE GRIP
USB-C
10

Screw three FLOOR STAND LEGs and ELBOW CONNECT together.
Then thread the TYPE-C end of the USB cable up through the hole in the center of the
Elbow bottom.
Push together the MOUNT to the BASE TUBE and second EXTENSION TUBE and
RETRACTABLE TUBE. Then screw RETRACTABLE TUBE and ELBOW CONNECT
together.
11

First, inse!the USB-C plug rese"ed in the MOUNT into the USB-C socket inside the
MONITOR neck, and then inse!the MONITOR and CORD back to the opening of the
MOUNT together until the locking device of the MOUNT gives rebound feedback to
complete the installation of the MONITOR.
Push the USB cord through the rest of the EXTENSION TUBE in sequence, and mount
them together by screwing the EXTENSION TUBE. Choose between three EXTENSION
TUBEs or two EXTENSION TUBEs as instructed.
12

Rotate AXIS HALO to reveal the position of the TF card slot, remove the TF card slot
cover, inse!side B ve!ically upward into the TF card slot until the TF card is locked,
and then restore the TF card slot cover to its original position.Do not power o"the
device when operating the TF card.
Side A Side B
The MONITOR installed on the MOUNT can be manually rotated 170 degrees from front
to back and 170 degrees from left to right to position its orientation. The appropriate
Angle needs to be adjusted according to the live stream screen in the VitaRadar APP.
Please refer to the application introduction of the APP for speci#c methods.
170˚
170˚
13

During the installation of EXTENSION TUBE, CRIB EDGE GRIP is !tted into the EXTRA
TUBE, or HOOK&LOOP is used to bind crib edge to the assembled FLOOR STAND, so as
to prevent the FLOOR STAND from falling down.
Inse"the POWER ADAPTER into the power socket, and then inse"the USB-A plug into
the USB-A socket of the POWER ADAPTER to power on and activate the entire device.
14

Limited Warranty & Compliance
The full information on Pxierra’s Limited Warranty visit: Pxierra.com/legal/warranty
Pxierra, Inc. | Pxierra Ai baby monitor | Model No: TVD6003H
This device complies with pa!15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful inte"erence, and
(2) this device must accept any inte"erence received, including inte"erence that may
cause undesired operation.
Any Changes or modi#cations not expressly approved by the pa!y responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to pa!15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful inte"erence in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful inte"erence
to radio communications. However, there is no guarantee that inte"erence will not
occur in a pa!icular installation. If this equipment does cause harmful inte"erence to
radio or television reception, which can be determined by turning the equipment o$
and on, the user is encouraged to t%to correct the inte"erence by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit di$erent from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Any changes or modi#cations not expressly approved by the grantee of this device
could void the user's authority to operate the equipment.
RF EXPOSURE WARNING:
This equipment complies with FCC radiation exposure limits set fo!h for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
POWER ADAPTER WARNING
The adapter shall be installed near the equipment and shall be easily accessible.
15

RF POWER SPECIFICATIONS
POWER SUPPLY INFORMATION
Radio
2.4G WiFi 2.4-2.4835 GHz
5.15-5.25 GHz
23.09dBm
12.75dBm
12.61dBm
5.725-5.850 GHz
5G WiFi
Frequency Max. Output Power
Input Voltage Input AC frequency Output Voltage Output Current Output Power
Average active e!ciency E!ciency at 10%load No load power consumption
100-240V 50-60Hz 5 V 1.0-2.1 A 11W
83.65% 80 .60% 0 .0033W
16