Pyle Pro PPG260A User manual

R
Owner's Manual
PPG260A
Guitar Amplifier
1
4
R
www.pyleaudio.com
www.pyleaudio.com

23
1) Power Switch: Switches amplifier on/off.
2) Power LED:Illuminates when power is switched on.
3) Input Jack: Connect your instrument to this jack.
4) Volume: This sets the volume gain level.
5) Bass: This control adjusts the low frequency level.
6) Treble: This control adjusts the high frequency level.
7) Phones Jack:This is your headphone connection.
Inserting the headphones disables the internal speaker
(great for practicing).
1) Voltage Selector: 110/220 Volt Selectable Switch.
2) Power Cord: Connect cord to an AC outlet.
Troubleshooting
Distorted Sound:
Check if the amplifier is overdriven. If it is, you will
have to turn the level down.
Check signal source.
Signal sounds discolored:
Check and adjust the EQ settings.
Ensure you are using quality cables.
Check signal source.
No Sound:
Check connections.
Try a different cable.
Check level on amplifier.
Confirm amplifier is getting a signal.
Make sure nothing is plugged into the Phones jack.
Intermittent Output:
Check connections.
Try a different cable.
Specifications
13456 7
1 2
Model Driver RMS Peak Dimensions Weight
PPG260A 20W 80W
6 .5" High
Definition
Speaker
W=9 2/3"
H=10 1/4"
D=6 1/4"
9.37lbs
2