Pyle PCAU48BT User manual

MODEL:PCAU48BT
www.PyleAudio.com
USER MANUAL
MINI 2X120W STEREO POWER AMPLIFIER
W/MP3 PLAYER/ W/BLUETOOTH & W/USB
CHARGING FOR MOBILE PHONE
8.27x2.83x5.43 inch(WxHxD)
Output power, 2 channels driven
4-ohm, 1 KHz 1% THD. 75.5 Wx2
4-ohm, 1 KHz 10% THD. 55.5 Wx2
Peak Power 120 Wx2

!
!
FOREWORD FEATURES AND CONTORLS
FRONT PANEL
1.
4.
-
-
Blue LED Output Level Indicators
2.Blue LED Display Window for MP3/Bluetooth Function.
3.Buttons for Bluetooth/MP3(USB and SD) Function Control.
-MODE Button: For audio selection like BLUETOOTH/USB/
SD/LINE IN
-PLAY/PAUSE Button: For play and pause control
-Prev,/Next: For quick backward or next song
Main Power on Switch
The amplifier is switched ON or OFF by using this switch.
5.Line input.AUX/CD IN
-Lets you easily connect the computerized MP3 Device
(player) sources, such as PC(CD ROM),laptop, walkman,
iPod,and cell phone.
6.1/4" PHONE JACK
Accepts headphones with 1/4" plug
7./8.BASS AND TREBLE TONE CONTROL
-Lets you boost or attenuate bass and treble for the desired
sound.
9.Master Volume Control
-Lets you adjust the overall sound level,turn the knob
clockwise to increase the volume.
4 5 6 7 8 9 10 11
2 31
PCAU48BT

BACK PANEL
10.USB Charge Port & USB Reader Function
USB port charges for smartphone, and also for USB reader
function.
11.SD/MMC Socket for playing SD/MMC cards.
12.Bluetooth Antenna
The antenna is best receiving for Bluetooth operation.
13.RCA L/R LINE Input
-Let you connect to the desired LINE input sources.
14.Push Type Speaker L/R Terminals
Let you easily connect the speakers' wires directly to
the amplifier
15.110V/220V Switch
According to power voltage, push this button to the
correct station of the 110V or 220V.
16.AC IN Power Cord
-Connect to AC 110V/60Hz or 220V/50Hz
17.Fuse
The amplifier uses a fuse for protection against surges
and short circuit. If the amplifier suddenly turn off and
will not turn on, check the fuse. If necessary, replace
it with a 1-amp, 250-volt, fast-acting, 5x20mm fuse
(not supplied)
-
-
-
-
-
12 13 14 15
16
17
1
2
3
4
5
6
7
8
9
10
11
1.Power Standby Button
2.Play/Pause Button
3.Equilizar Button
4.Repeat Song Button
5.Mode: Menu Control Button
Press it for audio input selection like Bluetooth/USB/SD/LINE IN,etc.
6.Mute Button
7.Previous Song Button
8.Next Song Button
9.Volume - & Volume + Buttons
10.USB/SD Switch Button
11.Number Buttons for Song Selection
REMOTE CONTROL FUNCTION

1. Be sure that the amplifier is powered on. And it’s better to pull
the Bluetooth Antenna on at the back of panel for better receiving.
Press MODE button until the display screen displays the word
bLUE. (The unit is automatically ready to pair with your device)
2. Turn on the Bluetooth function of your external device.
3. Search for available devices within range of your external
Bluetooth device.
4. Wait for a while then find the “TD301-RY” on the paired
devices list on your external device and select “TD301-RY”,
or find the “BT” on the paired devices list on your external
device and select “BT”.
5. Your amplifier will beep and the lights will flash once when
pairing is a success.
6. You can now play music and other audio on your external
device through your amplifier.
7. The amplifier will beep and the lights will flash once again
when the external device is turned off or unpaired.
BLUETOOTH FUNCTION INSTRUCTION
External devices which have a built‐in Bluetooth feature can be
connected to this amplifier wirelessly to play through the
amplifier’s speakers.
Turn the amplifier off and let it
cool, make sure that the amplifier
is properly ventilated, and then
turn it back on.
Make sure that the speakers
that you have connected to
the amp are matching in
impedance.
The amplifier is shutting down
or powering off
Adjust the volume control to
a higher setting.
Sound source or speakers
may not be connected
properly.
Master volume control may
be set to a minimum.
Microphone and speakers are
to close together
Feedback Reposition the microphone and
speakers