Pyle PYLE Plus Series PLCD68MP3 User manual

P / N : 570-F78902-01
Page. 1
OWNER'S MANUAL
ANTI-SHOCK CD / MP3 PLAYER
CD CHANGER CONTROL
AUXILIARY INPUT
SUPER POWER OUTPUT
ANTI-THEFT FLIP DOWN DETACHABLE FACE
FM/AM BAND RADIO RECEIVER
REMOTE CONTROL
MODEL: PLCD68MP3

Page. 2
P / N : 570-F78902-01
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
1. POWER ON/OFF CONTROL
Press the button to turn the power “ON” or “OFF”.
Note : The unit can be turn on by pressing any keys on the panel (except panel
release button & isc eject button). It will help the user who cannot fin the power
button in ark.
2. BAND SELECTOR
Each time this button is presse , the ra io ban is change . The in ication “FM1”,
“FM2”, “FM3”, “MW1” or “MW2” will appear on the isplay accor ing to your selection.
3. SCAN CONTROL
Press this button to scan the receivable FM / MW stations. When receivable stations are
tune in, they are monitore for approximately 4 secon s before a vancing to the next
receivable station. Press SCAN button once again to stop scanning as esire .
4. PRE-SCAN/AUTO-STORE BUTTON
This button allows you to enjoy “Preset Memory Scan” function by pushing it shortly,
an “Auto-Store Memory” function by pushing it more than 2 secon s.
• PS (PRESET MEMORY SCAN) - It calls the memorize station frequencies (from 1-6)
automatically every 5 secon s.
• AS (AUTO-STORE MEMORY) - It searches all station frequencies upwar an
memorize automatically 6 stations by catching the frequency which has scan-stop level,
the memorize station is shown on LCD as “CH1...6”. After memorizing, auto-store
memory function will be change to “Preset Memory Scan” function automatically.
5. DISC SLOT
Hol ing the isc an insert into the isc slot. The isc mechanism will automatically
engage into CD/MP3 play mo e.
6. LCD DIGITAL DISPLAY
The unit utilizes a igital type isplay which shows numerical in ication of station
FREQUENCY an other FUNCTIONS.
REMARK :
AT ANY TIME, IF THE WIRE IS DISCONNECTED, THE RESET SWITCH MUST BE PRESSED AGAIN BEFORE OPERATE THE
RADIO (REFER TO PAGE 6 FOR DETAIL). OTHERWISE, THE RADIO MAY NOT WORK PROPERLY.
7. CLOCK CONTROL
The button serves to show available information as following:
-Time
- Track No. / Playing Time ( uring CD an MP3 mo e)
- Directory Name / File Name ( uring MP3 mo e an the file must contain irectories or files
name written by the CD writer)
FIGURE A

P / N : 570-F78902-01
Page. 3
SETTING CLOCK TIME MANUALLY
Briefly press CLK button until clock time appear on the isplay.
Press an hol the button until the clock flash an release CLK button.
While clock is flashing, rotate volume control button clockwise to set HOUR an
anti-clockwise to set MINUTE.
. MUTE CONTROL
Press the button to mute volume control an “MUTE ON” will appear on the isplay.
9. DISC EJECT BUTTON
Press the button to eject the isc insi e isc slot.
10. PANEL RELEASE BUTTON (FIGURE A)
To etach the front panel, press the release button so that the panel fol own from
vertical position to horizontal position an then pull it off of the chassis at horizontal
position.
To re-attach the panel, push the fol - own metal frame forwar until it locks to the
original postion. Then, put the panel at the right si e of the position first an then press
the left si e of the panel until the mechanism lock it into place.
11. MODE SELECTION
Press this button to select Ra io (TUNER), CD / MP3 (S-CDP), CD Changer Control
(CD-C) an Auxilliary Input (AUX) mo e.
12. STEREO/MONO CONTROL
Press this button to select “STEREO” or “MONO” reception.
13. LOUD CONTROL
Press this button to activate the lou ness circuitry which compensates for loss of high
an low frequencies uring low volume levels.
14. LOCAL/DISTANT CONTROL
Press this button to prevent strong local stations from overlapping weaker stations. For
normal operation, press this button again for istance.
15. VOLUME / SELECTION CONTROL
Rotate the button anti-clockwise to ecrease, or clockwise to increase volume level.
AUDIO LEVEL CONTROL (WHEN PUSHING ONE AFTER ANOTHER)
Press this button shortly one after another to show VOL/BAS/TRE/BAL/FAD control.
VOLUME - Press this button once, then rotate anticlockwise to ecrease, or clockwise to
increase volume level.
BASS - Press this button once, then rotate anticlockwise to ecrease, or clockwise to
increase bass level.
TREBLE - Press this button once, then rotate anticlockwise to ecrease, or clockwise to
increase treble level.
BALANCE - Press this button once, then rotate anticlockwise or clockwise to level balance
of speaker right an left.
FADER - Press this button once, then rotate anticlockwise or clockwise to level fa er of
speaker front an rear.
AUDIO / SETTING SELECT (WHEN PUSHING 2 SECONDS)
When pressing the button for more than 2 secon s, it activates as unit setting selection in
cyclical mo e as following. The unit setting can be change byrotating the button clockwise or
anti-clockwise.
DSP OFF / POP M / ROCK M / CLASS M / FLAT M
ESP 12 / ESP 45 (setting 12 secon s or 45 secon s of electronic anti-shock time
for Au io CD)
BEEP OFF / BEEP ON (not available for this mo el)
SEEK 1 (tune up/ own buttons performs fast tune function) / SEEK 2 (tune up/ own buttons
performs auto tuning function when presse more than 1 secon )
COLOR 1 / COLOR 2 (not available for this mo el)
VOL LAST / VOL ADJ (preset volume level when unit turn on)

Page. 4
P / N : 570-F78902-01
16/17. MANUAL UP/DOWN TUNING / TRACK SEEK UP/DOWN CONTROL
On ra io mo e, press the button will tune one frequency step higher or lower. Pressing
the button more than 1 secon can performs fast tuning function or auto tuning function.
On CD/MP3/CDC mo e, press this button will locate the beginning of the track being
playe or will locate the beginning of the next track. When pressing more than 2
secon s, it will move fast forwar or fast backwar to a specific position of a CD/MP3
track.
1 . STATION PRESET BUTTON (1-6)
The PRESET BUTTONS on the unit are use to store station frequencies which you
may wish to recall. Each preset button can store FM1, FM2, FM3, MW1, MW2 station
frequency. Pressing the button momentarily recalls the station frequency which was
memorize . There are 6 preset buttons, giving you capability of storing 18FM / 12MW.
NOTE: When the preset button to be memorize is kept presse for more than 2
secon s, the receiving station frequency will be store in the button presse . After this,
the memorize station can be recalle by pressing the button once.
On CD / MP3 / CDC Mode
Preset 1 - press this button to pause the isc playe .
Preset 2 - press this button to scan the first 10 secon s of all the tracks on the
currently selecte isc.
Preset 3 - press this button to repeat the current track of the isc.
Preset 4 - press this button to play isc at ran om or er - Disc shuffle play.
Preset 5 - press this button to search previous isc numbers (for CDC Mo e only).
- press this button to search -10 track (for MP3 Mo e only).
Preset 6 - press this button to search the isc numbers ahea (for CDC Mo e only).
- press this button to search +10 track (for MP3 Mo e only).
INSTRUCTION TO PLAY MP3 SONGS
IMPORTANT NOTES
• The MP3 file recording media acceptable to this unit are CD-R and CD-RW.
• The MP3 formats acceptable are limited.
• Do not attempt to play a media containing non-MP3 files or non-MP3 files ith MP3 extension. Ot he r i s e, t h e C D
Mechanism ill not be orking properly. If “ERROR” is sho n, it is suggested to reset the radio by presssing the
reset button.
PLAY ON MP3 SONG
• Insert the media ith MP3 song in the disc slot. The unit ill start playing and checks all the files and folder on
the media.
• If MP3 files and directories are recognized, the media ill start playing.
• The MP3 files and directories are accessed according to the order ritten by the CD riter.
TRACK SEARCH
• Press “AMS” button once and “Track srch” ill be sho n on the display.
• Press “SEL” to enter track search mode and “Track 001” ill appear on the display for you to enter track number.
• Rotate volume control button clock ise or anti-clock ise to shift number 0 – 9 in loop rotation.
• Press “SEL” shortly to select the first digit.
• Repeat the same procedure to enter the other digits if required.
• After the track number is selected, press “SEL” button more than 2 seconds to start playing the selected track.
• If track number is not entered ithin 10 seconds, the unit ill continue playing the current file.
FILES SEARCH
• Press “AMS” button t ice and “File srch” ill be sho n on the display
• Press “SEL” to enter file search mode.
• Rotate volume control button clock ise or anti-clock ise to vie the directories.
• After the selected directory is selected, rotate volume control either clock ide or anti-clock ise to vie the files.
• Press “SEL” to play the selected file.
• If directories or files name is not entered ithin 10 seconds, the unit ill continue playing the current file.

P / N : 570-F78902-01
Page. 5
CHARACTER SEARCH (OPTIONAL)
• Press “AMS” button 3 times and “Char srch” ill be sho n on the display.
• Press “SEL” to enter into character search mode and “A” ill appear on the display for you to enter first character.
• Enter hole name of files (maximum 8 characters) by Rotating volume control button clock ise or anti-clock ise to
shift “A-Z”, “0-9” & “ ” (space) in loop rotation.
• Press “SEL” shortly to select the first character.
• Repeat the same procedure to enter the other characters if required.
• After the hole name of file is entered, press “SEL” button more than 2 seconds to start playing the selected track.
Remark :
1) The media must contain directories or files name ritten by the CD riter in order to use in searching.
2) If only partial letters are entered for searching either in directories or files name, you may not get it correctly.
WIRE CONNECTION
CAUTION :
Do not connect the speaker wires to chassis or car body Each speaker wire cannot be soldered together with
other wires Otherwise, the unit will be damaged and no sound will come out anymore
RESET FUNCTION The RESET button is locate on the front
of main panel. It is recesse in or er to
prevent acci ental engagement, an can
be activate with the tip of a ball-point pen
or any similar pointe object. This reset
circuitry is provi e in or er to protect the
unit's microprocessor, an shoul only be
activate un er the following con itions :
a) Initial installation after all wiring is
complete .
b) Abnormal operation is encountere such
as numerical in ication on isplay is
erratic.
c) Whenever the reset button is activate ,
all preset memory content will be erase
an must be reprogramme .

Page. 6
P / N : 570-F78902-01
P / N : 570-F78902-01
UNIT REMOVAL
1. Remove Front Control Panel.
2. Slightly insert the key into the slot and
gently to release.
3. Separate the sleeve from the nit. Keep
release key in a safe place as yo may
need for f t re removal of nit.
WARNING!!
Due to protection of CD Mechanism, two small
screws on the top of the unit must be released
before operate the unit. Otherwise, the CD
Mechanism can not be working properly.
INSTALLATION
CAUTION : DO NOT PLACE
THE UNIT OVER THE
MAXIMUM INSTALLATION
ANGLE OF 30°. OTHERWISE,
THE UNIT MAY NOT WORK
PROPERLY
REMOTE CONTROL
This manual suits for next models
1
Table of contents
Other Pyle Car Receiver manuals
Popular Car Receiver manuals by other brands

Sony
Sony CDX-F5500X Operating instructions manual

Eclipse
Eclipse AVN5510 owner's manual

Sony
Sony XR-CA360X Operating instrucktion

SoundMax
SoundMax SM-CMD3016 instruction manual

Panasonic
Panasonic CQ-DVR7000U operating instructions

Jensen
Jensen VM9223 - Touch Screen Double Din MultiMedia... installation guide