Pyle discojam PSUFM1045A User manual

WWW.Pyleaudio.con
Operating Instructions
PSUFM1045A
1000 Watt Powered Two-Way DJ Speaker W/USB/SD, Fm Radio,
3.5Mm AUX Input, Graphic EQ, & DJ Flashing Lights

Specifications
PSUFM1045A
*Dual 10" Woofer And Two 3" Piezo Tweeter
*USB/SD Flash And Card Reader Function With FM Radio
*USB Provides 5v 1a Charge For Smart Phones And Other Devices
*Display Screen Shows Number Of Songs, Play Time And Fm Radio Frequency
*Bluetooth Compatible For iPhone And Most Smart Phones
*Portable Carrying Handles For Easy Transport
*Disco Lights With On/Off Control
*Two 1/4" Microphone Inputs
*One 3.5mm Aux Line Input With Cable (Compatible With All Mp3 Players
And Devices With Headphone Outputs)
*RCA Stereo Input And Output
*7 Band EQ With EQ ON/OFF Control
*Speaker Output Banana Plug For Passive Speakers And Model PSUFM1040P
*Ported Enclosure For Added Bass Response
*1000 Watts Peak / 500 Watt RMS Power @4ohm
*Woofer Magnet Weight: 25 Oz
*Sensitivity (1W/1M): 90Db
*Built In Crossover Network
*Crossover Frequency: 3.5kHz
*Frequency Response: 20Hz-20Khz
*35mm Speaker Stand Mount
*Ac 110/220v Power Switch
*Dimensions: 36.8" (H) X 15.2" (W) X 13.6" (D)
Safety Notes
6.Prot ect t he unit from moisture or rain .
5.Keep t he un it in a well ventilated envir onm ent a nd keep away
from, di rec t sunlight to prevent unit fr om ov erh eating.
4.Don' t use v olatile or dangerous chem ica l cle aners on the unit
(like to lue ne, alcohol, gasoline etc .) Us e gen tle cleaners.
3.Do not o pen c hassis! Extermely dange rou s! Do n ot put your hands
inside t he ch assis. If the device begins t o mal fun ction do not
attemp t to re pair, unplug the unit and con tac t Pyl e immediately.
2.Carf ull y handle, plug and unplug the p owe r cab le when handling.
Hold the p lug w ith a firm grip and when pluggi ng or u npl ugging from
socket s.
1.Corr ect p ower must be used to operate th is un it pr operly,
do not use a ny ot her powering options, cor ds or m eth ods.

Speaker Board Schematic
Guitar Input Jack
Next Control
Play /Pause Control
Prev Control
Mode Control
Guitar Volume Control
EQ Switch
Bass Control
Treble Control
Volume Control
EQ Control
Line In Aux Audio Input- /
USB/SD Jack
Echo Control
Mic Volume Control
Mic Input Jack
17
18
19
20
21
23
22
Metal corner
Tweeters
Speaker handle
Woofer Speaker
Vent Hole
Woofer confinement
Speaker machine feet
GUITAR.VOL
Min Max
BASS
0 10
TREBLE
0 10
M.VOL
0 10
M.ECHO
US B SD/MMC
0 10
MIC.1 MIC.2
ON OFF
EQ
MaxMin
VOLUME
GUITAR.IN
SCA NCH- C H+
8 8 8 8
dB-15 - 10 -7 -4 -2 0 +1 +2
LEVEL
METER
+10
+8
+6
+4
+2
0
-2
-4
-6
-8
-10
+10
+8
+6
+4
+2
0
-2
-4
-6
-8
-10
63 160 40 0 1K 3K 8K 16KHz
MASTER EQUALIZ ATION
17
18
19
20
21
22
23
1234567
8
9
10
11
12
13
14
15
16

Speaker Board Schematic
4Ac Power Supply
Voltage Selector Switch
Power Switch
Vice-Box Power output
Line In Aux Audio Input- /
Line Out Aux Audio Output- /
Fm Antenna
The fan
3
2
7
6
5
8
1
4
1
3
2
7
6
5
IN
OU T
AU DIO O UT
R R
L L
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AC INPUT
ON
OFF
110V~220V
50Hz/60Hz
110V 220V
VOLTAGE
SELECTOR
CAUTION
POWER
ANT
INOUT
AUDI O OUT
R R
L L
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AC INPUT
ON
OFF
110V~220V
50Hz/60Hz
110V 220V
VOLTAGE
SELECTOR
CAUTIO N
POWER
ANT
8

Turning ON/OFF
The Speaker can be powered when connected to mains power.
1. Connect the power cable to the top of the unit.
2. Connect the other end of power cable to mains power.
3. Turn on the switch at the mains power point.
4. The unit will automatically power on when connected to mains power.
Instructions
Using the Wired Microphone
You can connect the wired microphone to this unit using the MIC INPUT
located on the top of control panel.You will require an adapter if your
wired microphone does not use a 1/4” plug.
1. Turn of the unit.
2. Connect your wired microphone to the MIC INPUT located on top of
the control panel.
3. Adjust the microphone volume by tuning the MIC VOL/ECHO knobs
located on top control panel.
NOTES: You can use the wired microphone(not included) and wireless
microphone at the same time.
Connecting a Guitar
You can connect your Guitar to unit using the 1/4” GUITAR INPUT plug.
1. Turn on the unit.
2. Connect your guitar cable to GUITAR INPUT port on top control panel.
3. Adjust the volume by turning the GIUTAR VOL on top control panel.
Instructions

Instructions
USB/SD Card Playback
You can play music from USB stick or SD Card using the USB/SD slot on
the Speaker.
1. Turn on the unit.
2. Insert your USB or SD card into the slot.
3. Once you insert the USB or SD card, the unit will begin automatic play.
4. You can use the PRE/NEXT/PLAY/PAUSE controls to play music.
NOTES: The speaker system can play the following audio file formats:
MP3,MP4,WMA.The USB/SD Card no more than 32GB.It will need several
seconds to play when your USB/SD Card is full of contents.
Using the Radio
1. Turn on the unit.
2. Press INPUT just once, it is FM Radio.
3. Press PRE/NEXT to select the radio stations.
4. Ensure that you have an extended antenna located on the rear of the
speaker. It will ensure the best possible radio quality and signal strength.
5. At the first use of the radio, press NEXT button twice, it will auto search
and store the radio stations.

tel: [phone] fax: [phone]
1600 - 63rd StreetBrookIyn,N Y,11204
www.pyleaudio.com