Pyle PLUTV43BTA User manual

4’’WaterproofRatedOff-Road
WirelessBTStreamingSpeakers
Amplified Vehicle Speaker System
for ATV, UTV, 4x4, Jeep (800 Watt)
PLUTV43BTA

www.PyleUSA.com 2
PLUTV43BTA Installation
1. To avoid potential shorts in the electrical system, be sure to disconnect the (-) battery cable
before installation. Use this unit with a 12-Volt battery and negative grounding only.
Failure to do so may result in a re or malfunction.
2. Speaker Mounting suggestion as below:
Step 1: Unbolting the mounting bracket
Step 2: Slide in the buckle with rubber pad attached to the bracket stand of the speaker
Attach the set to handle bar of vehicle / ship
Step 3/4: Attach screw to lock the buckle
Step 5: Using accessories of Butt Connector to Connect Speaker wires (See Illustration 1)
Step 6 : Using accessories of Butt Connector to Connect Power Cable (See Illustrations 2)
Rubber Pad
Blue
Blue
yellow
yellow
+ +
-
-
black
Red
AUX
IN
1
Blue
yellow
+
+
- -
BlackRed
Blue
yellow
+
-
+
-
Power
AUX IN
2

www.PyleUSA.com
3
PLUTV43BTA
4’’Waterproof Rated O-Road Wireless BT Streaming Speakers
Amplied Vehicle Speaker System for ATV, UTV, 4x4, Jeep (800 Watt)
Features:
• Pro Audio PowerSport Speakers
• Amplied (Active + Passive) Speaker System
• Bluetooth Wireless Music Streaming Abiltiy
• Bridged Sound System: (2) x 4.0'' Woofers + (2) x 0.5'' Tweeters
• Marine Grade Waterproof Rated Construction
• Weatherproof & Water-Resistant Housing
• 2-Way Full Range Stereo Sound Reproduction
• Built-in Digital Sound Processing Amplier
• Integrated Speaker Power & Wiring Harness
• Compact Size & High-Powered Output
• Impressive Bass Response
• Aux (3.5mm) Input Jack
• Connect & Stream Audio from External Devices
• Sleek Design, Machine Molded Speaker Cabinet Housing
• Rugged, Universal Mount Bracket Design for Roll-Bar / Roll-Cage
• Used for O-Road Outdoor Vehicles: ATV, UTV, 4x4, Jeeps, Marine Watercraft
Bluetooth Connectivity:
• Simple & Hassle-Free Pairing
• Instant Wireless Audio Streaming Ability
• Works with All of Today’s Latest Devices
• Smartphones, Tablets, Laptops, etc.
Technical Specs:
• Speaker Power: 800 Watt MAX
• Amp Power: 2 x 250 Watt MAX @ 4 Ohms (2 x 125 Watt RMS)
• Amp Type: 2-Channel, Class D
• Marine Grade Waterproof Rating: IP-X5
• Speaker Type: Polypropylene Cone, Butyl Rubber Surround (x2)
• Tweeter Type: Neodymium Dome (x2)
• Frequency Response: 85Hz-20kHz
• Impedance: 4 Ohm
• Magnet Type: 20 oz. Circuit
• Mid-Woofer Voice Coil Type: 1.0'', Aluminum
• Sensitivity: 90 dB +/- 2 dB @ 1M/1W
• Anti-Thump Turn-On
• Soft Turn On/O
• T.H.D: <0.05%
• S/N Ratio: >95dB
• Channel Separation: >65dB
• Amp Freq. Response: 10Hz- 30kHz
• Fuse: 1 x 10A
• Universal Mounting Brackets Roll-Bar / Roll-Cage Diameter: 1.25’’ ~ 2.0’’ -inches
• Speaker Dimensions (L x W x H): 5.62’’ x 8.38’’ x 7.29’’ -inches, with Bracket (Each)
• Power Supply: DC 12V
• Sold as: Kit
What’s in the Box:
• (1) 4'' Amplied Main Speaker
• (1) 4'' Passive Support Speaker
• Speaker Connection Wires, 6.5' ft.
• Wire Butt Connectors, 16-22 AWG
• EVA Mounting Pads
• Bluetooth Version: V4.2
• Bluetooth Network Name: ‘PYLEUSA’
• Wireless Range: 30+ ft.
• * Bluetooth Receiver Module Built-Into Amplier
of Main / Active Speaker