
PMP50MEGAPHONE
OperatingInstructions
BatteryInsertion
PMP50Features:
x2Modes:TalkandSirenAlarm
xPowerfulPiezoDriverandLargeBellDiameter
xErgonomicPistolGrip&LightweightChassis
x1,200YardRange
x50WattMaxPowerOutput
xAdjustableVolumeControl
xDetachableHandheldMicrophone
xDC12VPowerSupplyConnectorJack
xIndoor/OutdoorUse
xBatteryPowered:Requires8x'C'Batteries(notincluded)
xDimensions:9.0''(Diameter)x13.8''(Length)
www.PyleAudio.com
Slide the 'PA Mode Selector Switch' on the side of the megaphone to choose the desired PA
mode and to power on/off the unit. Choose between 'Siren', 'Talk' and 'Off' modes.
Talk:
Whilein'Talk'mode,speakthroughthemicrophonemouthpiecewhileholdingthe'PressͲtoͲTalk'
buttononthedetachablehandhelddifferentialmic.Theuseralsohastheabilitytousethe'PATalk
TriggerSwitch'onthemegaphone'shandheldpistolgrip.
- Also located on the handheld mic is an adjustable volume control slider.
Siren:
Selecting this mode activates an automatic, continuous alarm siren. Switch to another
mode to discontinue the alarm siren play.
Off:
Powers the unit off.
Unfasten the clip located near the top, back-side of the unit. The clip will release the
lid to reveal the battery compartment.
Please see correct battery direction placement on the top side of the opening battery
compartment lid. Insert batteries, close the cover and fasten clip until locked.
- Make sure the batteries are inserted correctly observing correct polarity.