Pyle PSRB8 User manual

Tri-Way Clear Sound Bluetooth Shower Speaker
PSRB8
www.pyleaudio.com
User’s Manual
Function:
1) Bluetooth function, compatible with iPhone, iPad, Android smart phones and other
Bluetooth devices. No wires needed , Lets you enjoy music streaming wirelessly from
Bluetooth device and receive phone calls.
2) Built-in speaker, provides superior sound quality.
3) AUX IN, 3.5mm jack, can connect to your PC, VCD, DVD, TV or any other aux input
device.
4) USB charging function
Operation:
1), First slide the ON/OFF switch to ON position to turn on the unit. Press the
button PAIR, the Bluetooth LED indicator blinks fast. Search for the Bluetooth device
PSRB8 on the smart phone or iPhone device list and pair. When the device is con-
nected, the LED indicator blinks slowly.
2), Play and pause : Press once to play or pause the music.
3), Previous song : Press once to skip to previous song, press and hold to decrease
the volume.
4), Next song : Press once to skip to next song, press and hold to increase the
volume.
5), Aux in : While Bluetooth function is playing music, plug in AUX IN cable and listen
to music from external audio player. Bluetooth operation will be paused; any
incoming call from the mobile phone will wake up the Bluetooth function,
also see “Bluetooth Hand Free” section below.
Unplug Aux-in cable, Bluetooth automatically connects again.
6), LED indicator : While power on; Green indicates Bluetooth mode.
Amber (Red+Green) indicates charging status.
While power off; Red indicates charging status. When the unit is
fully charged, the indicator light is off.
7), Bluetooth Hand Free : When in Bluetooth mode, to answer incoming call, press
button to answer the phone. Press / button to adjust
incoming voice volume. When phone conversation is nished,
press to hang up. Press and hold for 3 seconds to dial
last number.

Warning:
1. Please use standard 5V/500mA DC adapter and supplied USB cable to charge unit;
Or connect USB cable to computer USB port to charge. If the adapter power is not
enough, it may cause unit not to be fully charged or shorten battery life.
2. Please do not use the unit in high temperature or moisture environment for long
periods of time.
3. When the unit malfunctions, the internal battery may need charged. The unit can
operate when charging battery.
Features:
Power Rating: 2W
Speaker: 4Ω3W
Noise-signal Ratio: >80dB
AUX IN: 3.5mm jack
Battery: built-in Lithium battery
Charge power: 5V 500mA
Bluetooth range: > 32 feet (The distance may vary in different
environments or with different Bluetooth devices)
Compliance with FCC Regulations:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guaranee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
www.pyleaudio.com
Important Safety Instructions:
1. Keep these instructions.
2. Heed these instructions.
3. Follow all instructions.
4. Do not charge the unit internal battery in a wet environment.
5. Only use attachments / accessories specied by the manufacturer.
6. Do not use the unit in places which are extremely hot, cold or dusty place.
7. Do not use or keep the unit in an area exposed to direct sunlight.
8. No naked ame sources, such as lighted candles, should be placed on the apparatus.
9. Do not open or disassemble this unit.
10. Take care not to drop the unit or subject it to strong shocks.
11. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.