Pyle PHSKR14 User manual

www.PyleUSA.com2
TABLE OF CONTENTS
SAFETY INSTRUCTIONS
REMOTE CONTROL
FRONT PANEL
REAR PANEL
CONNECTIONS
SYSTEM SETUP FOR DVD MODE
REMOTE FUNCTIONS
HOW TO SEARCH
SYSTEM SETUP
TROUBLESHOOTING
USB COPY
COMMON OPERATION
SPECIFICATIONS
3
4
5
6
7
8
9
11
12
14
14
16
17

Cracked Broken Deformed
www.PyleUSA.com 3
Safety Instructions
Basic Safety Requirements
1. Unplug the unit during lightning storms or when you do not intend to use it
for a long period of time.
2. To remove the plug from the electrical outlet, do not pull on the supply cable.
Grasp the plug rmly and pull to remove.
3. If the supply cord is damaged in any way, it must be replaced by the manufacturer,
its service agent or a similarly qualied person in order to avoid a hazard.
4. Place the unit where there is good ventilation.
Place on a at, hard and stable surface.
5. Do not place the unit of a bed, sofa, rug or similar surfaces as this may lead to
the ventilation openings being blocked.
6. Do not expose the unit to direct sunlight or place it in any abnormally hot
locations.
7. Do not place the unit under any heavy object or in an unventilated place.
8. This product has no user-serviceable parts. Do not attempt to repair this product
yourself. Only qualied service personnel should perform servicing.
Take the unit to the authorised service centre for inspection and repair.
9. Due to the high risk of re or electric shock, do not expose this unit to rain or
moisture. Do not open the cabinet as dangerous high voltages are present
inside the enclosure. Only qualied service personnel should attempt to open
the cabinet.
10. There is a laser system inside this unit classied as CLASS 1 LASER PRODUCT.
Do not stare directly into the beam as this may harm your eyes.
11. If it is very cold, please place the unit in a warm room and turn the power on
for about an hour. After that, the unit will be ready to be used.
12. Always ensure that the product is unplugged from the electrical outlet before
moving or cleaning. Clean it with a soft cloth slightly moistened with a mild
detergent. Do not use any abrasive pads, sourcing powder or solvents such as
alcohol as they may damage the surface of the unit.
13. Do not use discs with scratches and/or deformities.

www.PyleUSA.com4
As a disc is rotated at a high speed, it is dangerous to play a broken or deformed
disc. Do not apply any tape or glue to the disc as this could lead to damage of
the player. Should there be a strange noise or vibration whilst playing, if the
picture or sound skips, or if the picture is distorted, stop the player immediately.
Remote Control Function Keys
Note: Use 2 x 'AAA' batteries (Don't included). Keep away from children.
OPEN/CLOSESTANDBY
PROGRAM
PBCCLEAR
GO-TO
RETURN OSD
ANGLE MODE
SUB/COPY
ZOOM
A-B REPEAT
VOL+VOL-REPEAT
SETUP DVD/USB
MENU
SCAN
FM-
FM+
CH-
CH+
STOP
ENTER
TOP MENU
LANGUAGE
MUTE
L/R
1 2 3
4 5 6
7 8 9
10 10+
1
2
3
4
5
6
7
8
1. Standby/Power on/off switch: Press to open/close
the unit power. In this mode, he unit is still consuming
a small amount of power.
OPEN/CLOSE: Open/Close the disc tray.
2. Mute: Press to mute or unmute the sound
Zoom: Magnies/Shrinks the screen image size
Angle: Chose the dierent angles in the same
image (Only support have multi-angle discs)
Mode/Source: Press to choose Line in (AUX)/BT/
DVD/USB/FM modes
3. SUB/COPY: Press subtitle button to displays the
subtitles in dvd mode (Only supports multi-subtitle
discs) Copy music contents from loaded CD disc to
inserted USB drive
Clear: When using PROGRAM feature, press CLEAR
to clear the input number.
PROGRAM: First, press PROG to enter program
status. Then, press to select the item.
Press 0 to 9 to specify the 2-digit order (To cacle,
press clear).
Press to select Start, press OK to start
programed playback. Press STOP twice to clear
the whole proram.

www.PyleUSA.com 5
Front Panel
1
3
5
7
8
9
10
11
12
13
14
15
16
17
18
19
2
4
6
1. POWER BUTTON
2. STOP BUTTON
3. VOLUME
4. PREV/CH-
5. PEV/TU.-
6. TREB
7. EQ
8. SOURCE
9. DISC TRAY
10. MIC
11. USB PORT
12. REMOTE CONTROL SENSOR
13. OPEN/CLOSE BUTTON
14. PLAY/PAUSE/SCAN
15. NEXT/CH+
16. FWD/TU.-
17. BASS
18. LIGHT SWITCH
19. AUX INPUT

www.PyleUSA.com6
Rear Panel
1
8
2
5
6
7
4
3
PHSKR14
RATED SUPPLY VOLTAGE:AC 200-240V
RATED FREQUENCY:50Hz
RATED POWE R: 300 W
HOME ENTERTAINMENT CENTRE
1. Y Cb/Pb Cr/Pr OUT
2. R/L OUTPUT
3. VIDEO OUT
4. SPEAKERS OUTPUT
5. FM ANT
6. LED1
7. LED3
8. LED2

www.PyleUSA.com 7
CONNECTIONS
Connecting to a TV Set
L Speaker
R Speaker
SW Speaker
PHSKR14
RATED SU PPLY VOLTAG E:A C20 0-2 40V
RATED F REQ UEN CY:5 0Hz
RATED P OWE R: 300W
HOME ENTERTAINMENT CENTRE

www.PyleUSA.com8
SYSTEM SETUP FOR DVD MODE
Setup
Follow the steps below to check the connection:
1. Turn on the TV and shift to “VIDEO INPUT”.
2. Turn on other units such as an audio or VCR if they are connected.
Turning the Unit On:
1. Press the POWER button on the panel. The DVD player will automatically read a
disc if it has already been inserted in the player.
2. Press the OPEN/CLOSE button to open the disc tray to insert or replace a disc.
3. Insert a disc onto the disc tray and press OPEN/CLOSE button again to close
the disc tray. The screen will display what type of disc is being played.
4. The DVD player will select the state of play according to the disc format.
Note: PBC is the abbreviation for PLAYBACK CONTROL. If a disc has PBC, it means
that it has a menu from where you are able to choose a track, chapter or other
instruction at the beginning of playback.
Playing a Disc:
Turning the Unit Off:
Press the STOP button, then press the OPEN/CLOSE button to open the disc tray.
Remove the disc and close the disc tray by pressing the OPEN/CLOSE button
again. Then press the POWER button to turn o the player. It is recommended
that discs are removed before the player is turned o. Remove the plug from the
outlet on the wall if the player will not be used for a long time.
DIS C FO RMAT STATE OF PLAY
CD/ MP3 First track.
DVD/VCD/SVCD wit h PBC From the menu screen, press the PBC button
on the panel oron the remote control to play
back from the beginning.
DVD/VCD/SVCD without PBC Automatically plays from the beginning.
ACTION BUTTON ON PANEL KEY ON REMOTE CONTROL
Play PLAY/PAUSE PLAY
Pause PLAY/PAUSE PAUSE
Next track or chapter NEXT NEXT
Previous track or chapter PREV PREV
Stop STOP STOP

www.PyleUSA.com 9
REMOTE FUNCTIONS
NO. OPERATION DISC INSTRUCTION
1STOP
RESUME
ALL
FORMATS
Please note: The player will go into SCREEN SAVE MODE if
there is no activity within one minute. Press any key to return
to NORMAL mode.
Press STOP button to enter Stop mode. The TV screen will
display the starter logo. With certain disc types, such as DVD,
the player can resume playback from the point where it was
stopped. Press RESUME to resume playback from the location
where playback was stopped or from the beginning of the disc.
2 STEP
DVD
SVCD
VCD
Press STEP continuously to single step forward to the next
frame in the video. Press PLAY to resume normal playback.
3FAST
FORWARD DVD
SVCD
VCD
Press FWD button to fast forward through the disc. Each
time the FWD button is pressed, the fast forward motion
speed changes. Press PLAY to resume normal playback.
4REWIND
DVD
SVCD
VCD
Press REV button to rewind through the disc. Each time
the REV button is pressed, the rewind motion speed
changes. Press PLAY to resume normal playback.
5SLOW DVD
SVCD
VCD
By continuously pressing the "SLOW" button, the following
mode and information will appear on the screen - slow
forward 1/2.1/8.1/16.1/32. Press the "PLAY" button at
anytime to return to normal playback mode.
6 REPEAT DVD
To repeat a chapter, DVD title or the whole DVD content,
please see below:
- Press REPEAT once to repeat the contents of the chapter.
- Press it twice to repeat the contents of the title.
- Press it three times to repeat the contents of the DVD disc.
- Press it four times to cancel the repeat mode.
7 A-B REPEAT ALL
To repeat a specific section of the DVD content, please
follow the steps below:
Press the A-B key to set Point A as the starting point.
Press the key again to set Point B as the end point. The
part between A and B will be played repeatedly.
Press A-B key a third time to cancel this function.
8
ZOOM DVD
SVCD
Press the "ZOOM" button continuously to increase the size
of the picture by X1, X2 or X4. Use the "UP", "DOWN, "LEFT"
and "RIGHT" buttons to move the picture.
9 RETURN SVCD
VCD2.0 Press this key to return to the main menu.
10 PBC
(Playback
Control)
DVD
SVCD
VCD2.0
The PBC allows the user to playVideo CDs interactively.
If PBC is ON, the user can use the digit buttons to
select a track butonlyfrom the menu. If PBC is OFF,
theuser can select the track directly.
11 TITLE DVD Press this key to plav the selected menu.

www.PyleUSA.com10
12 MENU DVD Press this key to play the selected menu.
13 DIRECTION&
ENTER
ALL Press this key to choose the selected column
you want, and then press “ENTER” to confirm.
14 ANGLE DVD Press this key to watch the same scene from
different angles. A multi angle icon will be
shown on the bottom left corner of the TV screen
to prompt you to shift from this angle to another
angle.
15 LANGUAGE
SUBTITLE
DVD Press this key to shift from one language(subtitle)
to another(need disc support).
16 U R
DVD
SVCD
VCD
Continuously press this key to select left
channel, right channel or stereo. You should
first choose audio output as 2 CH in the setup menu.
17 MUTE
VOLUME+/-
ALL
FORMATS
Press “MUTE” to turn offsound and press again
to turn on. Press “VOLUME” to increase and
decrease the sound.
18 OSD
DVD
SVCD
VCD
On Screen Display (OSD). Users can select the
whole setup menu and on-screen display language.
19 N/P DVD Continuously press this button to shift between PAL
and NTSC TV systems. Choose the correct system
to fit your TV set, otherwise you may only get a
black/white or unstable image.
20 FREEZE DVD
SVCD/DVD
Press this key once to "freeze” image whilesound is
still on. Press the button a second time to cancel.
21 RAND ALL
FORMATS
Press this key once to get random
playback. Press it a second time to cancel.
22 REMAIN DVD
Press the REMAIN button to check total remaining
time of a title or chapter being played. Each time
the REMAIN button is pressed, the information
changes.
SVCD
VCD
CD
Press the REMAIN button once to check the
remaining time of the track, a second time to check
the remaining time of the chapter and a third time
to check the remaining time of the disc.
23 PROG SVCD
VCD
CD
Press the PROG button to setup the playback
sequence manually, i.e. if you want to playback
track 2, 11 and 102, do the following:
1.
Press 2,
2.
Press+10,1
3.
Press +10 ten times, then 2.
Finally, press “PLAY” to go to your chosen track.
24 SETUP ALL
FORMATS
Press the "SETUP" button to select the various
functions of yourplayer, forexample, audio output,
parental control, etc. Refer to chapter 6 forfurther
details.

www.PyleUSA.com 11
HOW TO SEARCH
DISC OPERATIONS TV SCREEN
DVD
TITLE :1/2 CHAPTER :2/18
DVD
•To play Title 2, press TIME on the remote
control, then press 2 and then PLAY.
•To play Title 1 chapter 5, press TIME on the
remote control, RIGHT, then press 5 and PLAY.
•Press “TIME" again to directly input a
specific time for example:
•If you want to play the DVD at 1:23:45 point
(one hour, twenty third minute and forty fifth
second) input 1,2,3,4,5 and press PLAY.
•If you want to play the DVD at the 00:23:45
point (twenty third minute and forty fifth
second) input 2,3,4,5 and press PLAY.
TITLE: 2/2
SVCD/
VCD/
CD/
Press “TIME” to directly input the time.
Please note:
1. Turn off PBC for SVCD and VCD 2.0 before
using the search function.
2. CD: You may directly input the track
number you want to listen to. In other
words, you do not need to use the search
function.
MP3
The search function is not available when
playing MP3 discs.
Choose yourfavourite songby following
the instructions below:
1. Please make reference to Fig 1 on the
right hand side - this is the interface when
playing MP3 discs. The highlighted song is
the song that is currently playing. Press
NEXT/PREV to select another song. The
selected song will automatically play. You
can also press UP, DOWN, LEFT or RIGHT to
select a specific song then press PLAY.
SONGLIST 01/02 DIR: DIR
NAME 01/15 TRK: 001/155
00:05
SONG1 SONG2 SONG3 SONG4
SONG5 SONG6 SONG7 SONGS
SONG9 SONG10
Fig 1
ALBUMLIST 01/02
SONG NUMBER:155
ALBUM1 ALBUM2
ALBUM3 ALBUM4
Press the TIME button once to display the
Screen Search menu. Press twice to cancel.
In the Search Menu, you can use the
UP/DOWN cursorbuttons to select an item.
Then press PLAY to confirm.
25 NUMERICS
& SEARCH
ALL
FORMATS
Press thesebuttons to go directly to where you
want to watch from or listen to. Refer to the next
chapter fordetails.

www.PyleUSA.com12
2. Press "RETURN" to go back to main
menu, (see Figure 2 on the right hand side).
Press NEXT to select an album then press
NEXT again to select a song.
Or you can input the required track number
directly to play a specific song.
ALBUM5 ALBUM6
ALBUM7 ALBUM8
ALBUM9 ALBUM10
Fig. 2
SYSTEM SETUP
1. MAIN MENU
Press the "SETUP" key on the remote control to enter the Setup menu.
Then press UP/DOWN/LEFT or RIGHT to highlight the option you want to adjust
in the menu and then press "ENTER" to enter. To exit the Setup menu, press the
"SETUP" key.
2. LANGUAGE SETUP
Some DVD players support multiple languages. Press the Language key, and the
first audio selection will appear on the screen. Select your required option.
Please see all options below:
3. SCREEN SETUP
This DVD player supports a variety of Video Outputs.
SUB-MENU CHOICE REMARK
OSD ENGLISH/ESPANISH Select the language for the OSD Setup menu.
MENU 1-8 Select the language for the DVD menu.
AUDIO 1-8 Select spoken language.
SUB-TITLE 1-8 Select subtitle language.
RETURN Return to the Main menu.
SUB-MENU CHOICE REMARK
TV TYPE 16:9/4:3PS/4:3LB Please select the mode that is the most
compatible with your TV.
SCREEN
SAVER ON/OFF Choose whether to have a screen saver or not.
TV SYSTEM PAL/NTSC/AUTO Select suitable TV system.
BRIGHTNESS NORMAL/ BRIGHT/SOFT Adjust the brightness of the video output.
CONTRAST -4-4 Adjust the contrast of the video output.
RETURN Return to the Main menu

www.PyleUSA.com 13
4. PARENTAL LOCK SETUP
This DVD supports parental control password protection to prevent children
from watching unsuitable movies or images.
5. AUDIO SETUP
The setup operations are as follows:
SUB-MENU DESCRIPTION TV SCREEN
PARENTAL CONTROL
You will be asked to input a password
once Parental Control is selected. The
Parental Control level can only be
changed once the correct password
has been entered. There are a total
of eight levels. The higher the level,
i.e. level 8, the less the control over
what movies can be viewed.
PARENTAL CONTROL
SETUP
LEVEL :8
PRESS “LEFT”, “RIGHT”
TO CHANGE VALUE
CHANGE PASSWORD
Onlyonce the correct password is
entered, can the Parental Control be
activated. Thedefaultpassword is
"0000".
ENTER PASSWORD
THEN PRESS “ENTER”
SUB-MENU CHOICE REMARK
OUTPUT 2CH Left or right output.
5.1CH Decoded AC-3 5.1 channel output.
SPDIF
No-decoded AC-3 or DTS digital signal output. Make sure to
select this output if you are using a coaxial or optical output
to the audio amplifier.
CENTER ON/OFF To turn the centre speaker output On/Off.
REAR ON/OFF To turn the rear surround speaker output On/Off.
SUBWOOFER ON/OFF
To turn the subwoofer speaker output On/Off.
Please note:
1.These six speaker setups are only available when output
type is 5.1 CH.
2. The signal of turn -off channel will be distributed to other
channels.
LPCM 48/96kHz

www.PyleUSA.com14
TROUBLESHOOTING
Before repairing, please take a look at the following problems and possible
solutions first.
USB COPY
1. The USB storage capacity range must not exceed 16GB.
2. Only insert a USB where there is no disc in the tray.
3. Press "MODE" button on the unit or “SOURCE” on the remote control:
DVD and USB will appear on the TV screen. Please use “ ” and “ ” buttons to
select USB. Then press“ENTER” for the USB to be read.
Please note: If a disc needs to be read after a USB has been read, please press
“MODE” on the unit or“ SOURCE” on the control and use “ ” and “ ” buttons to
select DVD.
To Copy an MP3 File:
When playing an MP3 disc, press "COPY" button on the remote and enter the
copy selection interface; the content that can be copied are the tracks of the
current disc being played.
NO. PROBLEM SOLUTION
1. "No Disc"
displayed on
screen.
If you place the disc on the tray and the player displays “NO
DISC” once loaded:
1. Check whether the disc is placed correctly (label side up).
2. Check the format of the disc.
3. Check whether the disc is dirty or damaged.
4. Clean the lens - this usually needs to be done after 20
hours of playback.
2. No sound.
1. Set to current connecting channel.
2. Replace audio connection or connect correctly.
3. Ensure connected unit works properly or turn volume up.

www.PyleUSA.com 15
To Copy an MP4 File:
When playing an MPEG4 disc, press the "STOP" key to return to the menu interface
then press the "COPY" key on the remote and enter the copy selection interface;
the content that can be copied are the tracks of the current disc being played.
Create ID3 Information:
Move the highlight bar to "CREATE ID3 TAG" option, then press "ENTER" key to
select or cancel. By selecting this option during the copying process, the le will
be created with ID3 information which is produced automatically by the system.
When selecting, press the Direction and Conrm buttons.
Once the selection is complete, move the cursor to the program.
Selecting a Program to Copy:
Move the Direction cursor over the program to be copied. If only some of the
program is to be copied, move the cursor over the upper program selection, then
press Conrm to cancel the selection. Press the Direction buttons on the remote
control to select the program to be copied, then press the Conrm button.
Copy:
Move the highlight bar to "START" option; at this time, the information about this
copy will be shown on the right hand side (TOTAL TRACKS, TOTAL TIME and
TOTAL SIZE). Then press "ENTER" key to start copying and the system will write
the CD in MP3 format onto the designated USB. When copying at normal speed,
you can listen to the content to be copied at the same time; when selecting 4
times speed, it will be mute.
Please note: When you press the "ENTER" key to switch speeds, there will be a
slight sound which continues for a few seconds.
Cancel Copy:
During copy, you can move the highlight bar to "CANCEL" option and press
"ENTER" key to conrm.
Return from Copying Screen:
Move the highlight bar to "RETURN" option and press "ENTER" key to conrm
return.
Please note: Before copy, ensure that the available space on the USB is enough
for the size of the le(s) to be copied.

www.PyleUSA.com16
COMMON OPERATION
Wireless BT Connectivity:
• Hassle-Free Pairing, Simple Music Streaming
• Compatible with All of Today’s Latest Wireless BT Devices
(Smartphones, Tablets, Laptops, Computers, etc.)
• Wireless BT Version: 5.0V
• Wireless BT Network Name: ‘PHSKR14’
• Wireless BT Range: Up to 30.0’ ft.
To connect an external device to this unit via BT:
1. Press "SOURCE Switch" on the remote control or on the panel to select the BT
function. The corresponding screen will then display "BT" indicating that the BT
function is on.
2. Ensure the BT function is on on the external device and search for PHSKR14.
Once found, click on it and pair. Some devices may need a pin code to connect;
try 0000 or 1234. Once connected, you will hear a signal indicating that the
connection is successful.
Aux In Function Operation
Switch on the unit. Press the MODE button to switch to AUX IN mode. Connect
the external music player using the cable. The unit will start playing the selected
music on the external player. Using the remote control, play, pause or stop the
music being played. Please note that in Line Input mode, some functions may
not be available.
FM Radio Function Operation
Switch on the unit. Press the MODE key to switch to FM mode, then press the
SCAN key to automatically search and store radio channels.
When the search is complete, the unit will play the first stored channel.
Press NEXT or PREV button to select the next or previous radio station. If the
signal is not good, you can adjust the signal by pressing the REV or FWD button.
For better sound quality, make sure that the antenna is fully extended.

www.PyleUSA.com 17
Features:
• Compact & Portable Media Entertainment Unit
• Built-in BT for Wireless Audio Streaming
• Sound System: 8'' Subwoofer - 5.25” medium speaker -3'' Tweeter
• LED Digital Display Screen
• DVD/CD function
• FM Radio
• USB Flash Drive
• Aux (3.5mm) Output
• 1/4'' Two Microphone Inputs
• EQ Mode (Jazz, Class, Rock, Flat, POP)
• Connect & Stream Audio from External Devices
• Dual Amplier for Better Sound Performance
• Audio-in for Portable Music Playback
• High-Quality Sound, Powerful Bass
• Sleek and Compact Design
• Treble and Bass Adjustment
• Lights on Knob and Speakers (Blue)
• Blue Colored Speaker Lights
• DVD/BT/FM Radio/USB/AUX/Karaoke
• Digital Amplier IC for Strong Sound
Technical Specs:
• Power Output: 1000 Watt MAX
• Impedance: 4 Ohm+8 Ohm
• Frequency Response: 120Hz-15KHz
• Sensitivity (1w/1m): 650mV
• Signal to Noise Ratio: 52dB
• T.H.D.: <10%
• Low Frequency: 120Hz-4KHz
• High Frequency: 4KHz-15KHz
• Remote Control Battery Operated, requires (2) x 'AAA' Batteries (not Included)
• Digital File Support: MP3, MPEG4, WMA, WAV, AVI, MPG, 3GP, FLV, FLAC.
• Maximum USB Flash Support: 32GB
• Power Supply: 110/220V
• Dimensions (L x W x H): 12’’ x 15.6’’ x 36’’ –inches
What's in the Box:
• Wireless BT Streaming
DVD Stereo System
• Remote Control
• AC/DC Power Cord
• FM Antenna Cable
Other manuals for PHSKR14
1
Table of contents
Other Pyle Stereo System manuals