OPERATION
through this interface. When you connect
an USB driver through the interface, the
unit will search the MP3 /WMA files in the
USB driver and start to play automatically. If
in other mode, you can also press MODE
button to select USB mode.
It supports the MP3/WMA file in the device.
SELECTING SONGS IN SINGLE STEP
Press button (10) or button (9) to
move to the following song or the previous
song. File number shows on display.
Press and hold button (10) or
button (9) for 2 seconds to fast forward or
fast reverse. Song playing starts from when
you release the button.
PAUSING PLAYING
Press button to pause playing. Press
it again to resume playing.
SELECTING SONGS BY BAND BUTTON
In USB mode. Press BAND button (1) to
active the file search mode. It will show
“NUM ***”. In this moment press VOL+ or
VOL- knob to select the song number’s 1’st
number. 3 seconds later to select the 2’nd
number... (Such as when you want to select
the 32nd song. In “NUM ***”you press
VOL+ 3 times. It shows “NUM 3**”And 3
seconds later the 2nd “*”flash. You can
press VOL+ 2 times. It shows “NUM 32*”.
Then press button (5) to confirm. It will
start to play the 32nd song. But if you don’t
press button (5) to confirm. It will not
play the song you selected.
FOLDER+/- FUNCTION
When MP3/WMA playing. Press and hold
BAND button it will back to the previous
folder. Press and hold MODE button it will
to the next folder.
CAUTION：
When there are important files in the USB
Device, do not connect it to the main unit to
play, because any wrong operation may
cause files loss. And our company
assumes no responsibility for this.
BLUETOOTHOPERATION
PRE-PAIR FOR BLUETOOTH
OPERATION
(i) When use Bluetooth, please
make sure the mobile phone
supports Bluetooth function.
(ii) For the different kind of mobile
phone, Bluetooth emissive power has
some difference. To get the best
conversation quality, it is commended
that the distance between the mobile
phone and the unit is within 3m. And
please don’t put any metal object or
any obstacle between the path of the
mobile phone and the unit.
PAIRING
1) On the mobile phone, select the
Bluetooth set up. (Please refer to
the instruction manual of your
mobile phone on how to operate
Bluetooth.)
2) “CAR KIT”should appear in the list
on your mobile phone, please select
“CAR KIT”and then input password
“0000”if necessary.
When successful paired the BT mark
will be displayed on LCD.
Bluetooth audio (A2DP function)
Press MODE key (2) it will show “BT”
on the display. Then turn on the music
player of the mobile phone and playing
a song. The sound will come out from
the speaker of the unit.
Press key to pause/play the song.
Press button (10) or button (9)
to select next/previous song.
