Qlogic iSR6142 User manual

DATA SHEET
iSR6142
SAN over WAN Connectivity
Features
Optimizes SAN over WAN transfer to improve•
performance and reduces costs. SmartWrite™
helps improve SAN over WAN performance by
reducing the latency of WAN transfers. The iSR6142
increases productivity by optimizing data transfers,
sharing devices, and replicating data.
Increases ROI by enabling SANs to grow and scale•
independently. Many other SAN extension solutions
merge SAN fabrics, which limits the number of SAN
switches and devices. The iSR6142 removes the
limitations of a single name service.
Easy to use and own, with advanced install and•
configuration wizards that allow set up in less than
15 minutes. The iSR6142 is very power efficient,
using only 48W, and helps reduce power and
cooling versus competitive products
Improves data protection. The iSR6142, with•
Smart Write and FCIP support, has been tested
and certified with leading replication and data
management applications from EMC, HDS,
Symantec/Veritas, IBM, Legato, HP, NetApp, and
many more.
Benefits
QLogic’s iSR6142 multi-protocol router provides•
low-cost bridging and routing services that connect
SAN islands across the enterprise. This enables
IT managers to improve the performance and
lower the cost of data protection, replication, SAN
extension and disaster recovery.
The iSR6142 provides SAN connectivity over WANs•
by routing Fibre Channel over standard Ethernet,
expanding and bridging SANs around the globe.
SAN Over WAN Replication and Data Migration. The iSR6142 provides SAN
over WAN connection for data replication, migration, and disaster recovery.
The iSR6142 features SmartWrite, QLogic’s patent-pending technology
for accelerating replication over iSCSI, based on QLogic’s unique Layer 3
SCSI routing capabilities. SmartWrite optimizes key data management and
migration operations by increasing the amount of data within a packet and
by reducing the total transfer time across the WAN. The iSR6142 sets a new
price performance mark in the industry for SAN over WAN connection.
Key Advantages of the iSR6142:
Lower WAN costs with SmartWrite•
Improved ROI by sharing SAN resources globally•
Improved data transfer performance•
Leading Applications for the iSR6142:
Disaster recovery for business continuance•
Data migration for applications•
Replication of data for backup•
Shared SAN devices to improve utilization•
Connected SAN islands over WANS and LANs•
SAN Bridging for Improving SAN Utilization and ROI. The iSR6142 is the
ideal tool to expand the reach and connectivity of SANs by bridging SAN
fabrics. It enables sharing SAN devices independently across SAN fabrics.
By providing true SAN independence, the iSR6142 improves SAN scalability.
The iSR6142 offers unparalleled ease of integration, based on the same
proven QLogic ASIC technology that powers over 50 million storage products
sold by leading storage vendors. IT managers can now connect SAN devices
across any vendor’s SAN infrastructure, improving utilization and SAN ROI.

DATA SHEET
iSR6142 SAN over WAN Connectivity
SN0058075-00 A 2
Corporate Headquarters QLogic Corporation 26650 Aliso Viejo Parkway Aliso Viejo, CA 92656 949.389.6000 www.qlogic.com
Europe Headquarters QLogic (UK) LTD. Quatro House Lyon Way, Frimley Camberley Surrey, GU16 7ER UK [phone]
© 2008 QLogic Corporation. Specifications are subject to change without notice. All rights reserved worldwide. QLogic and the QLogic logo are registered trademarks and SmartWrite is a trademark of QLogic Corporation. All other brand and product names are
trademarks or registered trademarks of their respective owners. Information supplied by QLogic Corporation is believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any errors in this brochure. QLogic Corporation reserves the right,
without notice, to make changes in product design or specifications.
Interface Specifications
Gigabit Ethernet
Two ports: copper 1000 BaseT, RJ45•
Full duplex, auto negotiating 100/1000 Mbps•
Fibre Channel
Two optical ports, full duplex•
Auto negotiation: 2 Gbps or 1 Gbps•
N_ports, NL_ports, F_ports, FL_ports, E_ports•
Class 2, 3 connectionless•
Management port
Ethernet 10/100 BaseT with RJ45•
RS-232 serial port with RJ45•
iSCSI Initiator Support
Microsoft
Windows Server 2000, 2003, 2008•
Solaris
SPARC 2.6, 8, 9, 10•
x86•
Linux
Red Hat AS 3, 4, 5•
SUSE Enterprise Server 8, 9, 10•
VMware
ESX Server v3.x•
AIX
AIXL 5•
HP-UX
HP-UX 9, 10•
QLogic
4010, 4050, 4052, 4060, 4062•
Apple
OS X (via ATTO driver)•
Performance Features
Fibre Channel port speed
2-Gbps, full-duplex, auto negotiating for•
existing 2/1-Gbps devices
Ethernet/iSCSI port speed
1-Gbps, full-duplex, auto negotiating for existing•
100/1000-Mbps devices
Maximum data rate
320 MBps aggregate•
Input/output operations per second (IOPS)
35,000 aggregate•
Ports per chassis
Two FC, Two Ethernet/iSCSI•
FC: hot-pluggable, standard SFPs•
Ethernet/iSCSI: RJ45•
Supported SFP types
Shortwave (optical)•
Longwave (optical)•
Cable types
Optical (FCI): 50/62.5 micron multi-mode fiber•
9 micron single-mode fiber•
Unshielded twisted pair (Ethernet/iSCSI)•
Cat 5e or better•
Interoperability
Compatible with FC-SW-2 complaint switches•
Management interoperability with leading SAN•
management applications
Protocols
iSR6142
SmartWrite•
iSCSI to FCP•
FCIP•
CHAP security and authentication•
Device Management
Management methods
Wizard-based configuration tools•
Command line interface (CLI)•
SNMP and SMI-S•
Access methods
Dedicated out-of-band Ethernet 10/100 BaseT,•
RJ45
Diagnostics
Power-on self-test (POST) of all functions except•
media modules
User interface
LED indicators, CLI, and web utilities•
Mechanical
Enclosure types/options
Optional side-by-side rack mount kit•
Dimensions
Width: 177.8 mm (7.00”) – half rack•
Height: 42.16 mm (1.66”) (1U)•
Depth: 243.58 mm (9.59”)•
Power supply
48W maximum (optics included)•
100 VAC to 240 VAC; 50 Hz to 60 Hz•
0.5A at 100–125 VAC; 0.25A at 200–240 VAC•
Cooling
Two fans with back-to-front airflow•
Environmental/Safety
Operating
Temperature: +5°C to +40°C (41°F to 104°F)•
Humidity: 5% to 90% non-condensing•
Altitude: 0 to +10,000 ft.•
Vibration: IEC 68-2, 5-500Hz, random, 0.21G•
rms, 10 minutes
Shock: IEC 68-2, 4g, 11ms, 20 repetitions•
Non-operating
Temperature: -40°C to +70°C (-40°F to 158°F)•
Humidity: 5% to 93% non-condensing•
Altitude: 0 to +50,000 ft.•
Vibration: IEC 68-2, 5-500Hz, random, 2.09G•
rms, 10 minutes
Shock: IEC 68-3, 30g, 292 ips, 3 repetitions, 3•
axis
Agency
UL 60950 (USA)•
CSA 2.2 No. 60950 (Canada)•
EN 60950 (EC)•
CB Scheme-IEC 60950•