Windows 2000/XP/ Vista Home Basic
Under Windows 2000 / XP / Vista Home basic, you
must install driver (included in the Macro Key
Manager). Therefore, please install Macro Key
Manager before the device is plugged to your PC. Once
the Macro Key Manager is installed successfully, the
RF Wireless Tablet can work along with the macro key
and the hot keys.
Check the information displayed on the LCD indicator
panel to conrm that the tablet is operating correctly.
Then begin to use the pen & enjoy!
5. Begin Using
1. Plug receiver dongle to your PC
2. Press and hold for at least 3 seconds to power
on the RF Wireless Tablet
3. Press the binding button located at the rear of the
tablet while holding the binding button on the
receiver dongle at the same time.
4. The LCD connecting icon will blink and the blue
LED of receiver dongle will light up.
5. Once the binding is successful, the number on the
LCD will display 001.
6. Due to our pen’s power saving design, please always
hover the pen over the active area of the tablet to
awaken the pen prior to using the tablet.
7. Check the information displayed on the LCD
indicator panel to conrm that the tablet is operating
correctly.
You can begin to use the Wireless tablet, enjoy!
