Qotom QTW-01 User manual

Smart Water Timer
SHENZHEN POWER-TOMORROW ACTUATOR VALVE CO.,LTD.
www.qotoactuator.com
QOTO
User Manual

Contents
(1) The gateway connects with
network tutorial
(2) Add sub-device tutorial
4.Mobile APP interface
3.Installation and network
connection instructions
2.Product parameters
1.Product features

Product features:
Summary
1.Mobile phone wireless remote control
After the network is configured,the smart automatic watering
device can be turned on or off through the mobile phone remote
control anytime and anywhere.
2.Real-time feedback on the watering situation
The watering situation is fed back to the mobile phone inreal time,
so it is more safe to use.
3.Long standby time
The standard version uses two AA dry batteries,and the standby
life can be up to 1 year ;the high-end version is equipped with an am-
orphous solar cell board+rechargeable battery,and the standby life
can be up to 3 to 4 years.
4.The wireless signal is stable
Adopting RF signal transmission technology,the signal coverage
can reach 180 meters in the openarea,which is 2~3 times of WiFi,and
it is more stable.Up to 4 brick walls can be penetrated indoors.
5.Intelligent voice control system
Voice smart speakers such as AmazonAlexa,GoogleAssistant,Doer-
OS,etc.can be used to wake up the water valve to work,free your hands,
and interact with smart devices in a more natural way to achieve linkage.
6.Timing and quantitative setting
Set the time and duration of watering for multiple periods of the day,
and at the same time set the amount of watering.
7.Intelligent linkage
It can be linked with intelligent devices such as overflow sensors to
achieve the set conditions,and the water valve can be turn on or off.
8.History query
Each watering will record the time and duration,which can better
manage the watering.
9.Shared device function
You can share the equipment with your family or other users,to feel
the convenience of the smart watering device.
注2
2
1Remark1:According to the frequency of booting twice a day
Remark2:Depends on the surrounding environment of the equipment
1
2

Product parameters
Product
name
Smart water timer
Item Name
QT-05
Tube size
1/2"、3/4"
Power
5V / 1A
Pressure
≤1.6Mpa
Size
176*112*66mm
Standard
type
Dry batteries with 2 pc
High level
type
Monocrystalline Solar panel
+Chargeable batteries
Item Name
Smart gateway
Item Name
QTW-01
Working
temperature
-10℃~+50℃
Working
humidity
0-95%RH
No condensation
Operating
Voltage
AC100~240V
Wireless
connection
Wi-Fi IEE802 11 b/g/n
2.4G Below 1GHz
Indoor
Penetrate 2-3 walls
Outdoor
Covering more than
180 meters wide area
Black
White
Note: It is recommended to use Ni-MH batteries for chargeable batteries,
which have longer service life and no pollution.

Gateway networking tutorial
1、Press the switch key for 10s, the red indicator light will switch
to the flashing state
2、Open the smart home/Tuya smart APP to register and log in,
3、Click "+" in the upper right corner, or select "Add manually"
4、Click "Other" --- "Connector (WIFI)"
5、Enter the next page and enter the WIFI account and password
(same as the mobile phone connected to WiFi)
6、Click "Next" to go to the next page, tick "Confirm indicator flashes quickly"
7、Click "Next" to display the progress of adding devices
8、The red indicator light of the gateway is always on, and the network configuration
is successful.
①②③④
⑤⑥⑦⑧
（Video tutorial）
The red indicator light is flashing fast

Gateway QTW-01 add sub-device
Option 1：
Option 2：
Fast mobile network distribution through mobile APP
1、Open the APP gateway interface and select "Accessories"
2、Select "Quick Add"
3、Press the power button of the sub-device quickly twice, the gateway
will send out a prompt ringtone, and the addition is successful
4、Add more sub-devices and repeat actions 2、3and 4（As shown).
1、Press and hold the function key for about 5 seconds, the waist light of the
gateway will turn on and off once, and then release the function key after the
green indicator light is on.
2、After the white light on the waist of the gateway is always on, and press the
function key of the sub-device continuously twice, the gateway will send out
a prompt ringtone, and the network configuration is successful.
①②③
④⑤⑥
（Video tutorial）

QT-05
Mobile APP interface
1.Valve current status
2.Real-time status
3.Low battery reminder
Open to Maximum
volume
Display local wea-
ther conditions
Close to minimum
volume
Randomly adjust the
size of the water flow
from 0-100% with an
accuracy of 5%
History record
Show watering
countdown time 1.Set the duration time
2.Set the watering schedule

APP Download
Can't the mobile APP connect to the gateway?
1.Follow the steps in the operating instructions to restart the
connection once if it is not connected.
2.If you still can't connect, you can check several aspects to
check whether the WIFI and mobile phone network are in
normal use.
3. Confirm whether the WIFI name and wifi password are correct.
4. Whether the indicator of the sprinkler flashes quickly when
connected.
5. Confirm that the connected router is in the 2.4GHz band. If it is
in the 5G band, set it to the 2.4GHz band
Q&A
Company official
website QR code