QPS que! m3 Instruction Manual

Que M3 manual 8/23/01 7:03 PM Page 1

QPS TECHNICAL SUPPORT
Our Customer Support staff are ready to assist you with any problem you may have with
your QPS Product.
There are many ways to contact QPS Technical Support.
E-Mail: [email protected]
World Wide Web: http://www.qps-inc.com
Technical Support: [phone]
Technical FAX: [phone]
COPYRIGHT STATEMENT
Copyright © 1998-2001 QPS Professional Solutions. All rights reserved. No part of this
publication may be reproduced or transmitted in any form by any means for any purpose
without the prior written permission of QPS Inc.
Windows is a trademark of Microsoft Corporation.
All other brand and product names are trademarks or
registered trademarks of their respective owners.
COPYRIGHT PROTECTION NOTICE
Replicating copyrighted material without the permission of the publisher may be unlawful.
QPS does not condone, support, or encourage the violation of copyright laws. Please obtain
proper authorization prior to replicating copyright protected material.
Note: Please refer to Que! M3 Installation Manual CD for complete installation version.
TECHNICAL SUPPORT
Que M3 manual 8/23/01 7:03 PM Page 2

1
CONGRATULATIONS
CONGRATULATIONS!
Thank you for Choosing QPS!
In this manual, you’ll find information designed to
help you understand the capability of your new
USB 2.0 hard disk drive as well as a step-by-step
explanationofhowtoinstallyourhardwareandsoftware.
Que M3 manual 8/23/01 7:03 PM Page 3

2
PACKAGE LIST
Que! M3 UltraSlim™Hard Drive
One USB 2.0 port connection
Interface Drivers*
Window USB 2.0 Mass Storage drivers
Backup Software
Dantz Retrospect Express backup software for PC
Accessories
Hi-Speed USB 2.0 cable
External universal auto-switch power supply
User manual
Padded carrying bag
Note: If there is not an USB 2.0 port in your computer, you will need a separate USB 2.0 Host
Controller Card (not included) to connect your Que! M3 Drive.
* The drivers supplied in this kit are intended to provide support only for our device to be recogniged within
the system. USB 2.0 drivers for your Host Controller Card must be obtained from the manufacturer of your
card.
PACKAGE LIST
Que M3 manual 8/23/01 7:03 PM Page 4

3
PACKAGE LIST
Que M3 manual 8/23/01 7:03 PM Page 5

GETTING STARTED!
Before you start using your Que! M3 Drive, you’ll want to make sure you have everything you
need. In this chapter, we’ll tell you what comes in the package, so you can make sure it’s all
there.As well, in this chapter we’ll tell you about the minimum requirements your system
needs to support the Que! M3 Drive.
What You Should Have!
Refer to the provided package list on page 2 and verify that you have received all of the
appropriate parts.If all the right parts are in the package, then you just need to make sure
your system will support the Que! M3 Drive. Here’s what you’ll need:
• Pentium 333MHz processor or better
• MS Windows 98SE, Windows ME orWindows 2000*
• 64MB RAM
• Built-in USB 2.0 ports or add-on USB 2.0 Host Controller Card*
• CD-ROM drive for soft ware installed
• 100MB free hard disk space
* Hi-Speed USB 2.0 support drivers must be supplied by your System manufacturer, if your
USB 2.0 ports are on board oryour USB 2.0 Host Controller Cardmanufacturer, if you have an
add-in card.
Note: Please refer to Que! M3 Installation Manual CD for complete installation version.
4
GETTING STARTED
Que M3 manual 8/23/01 7:03 PM Page 6

INSTALLATION
INSTALLATION (WINDOWS 98 SECOND EDITION)
Step 1: Turn onthepower to yourPC andall otherperipherals that are attached.Connect the
Hi-SpeedUSB 2.0 cable to the USB 2.0 porton the backof yourPC or Card. Attach
the other end of the Hi-Speed USB. 2.0 cableto the USB 2.0 port on the backof
the Que! M3Drive.
Ifyou are installing the Que! M3 Drive
onanotebookPC equippedwith a
USB 2.0 port. Follow the directions in
step 1, then to connect thepower
adaptor, attach the round adapter
plugto the power interface
connector at theback of the
Que! M3 Drive. Then,
connect the power plug toa
power outlet.
Step 2: Ifthisisthe first time you are
installing a USB 2.0 storage device,
Windows 98SEwill ask you for the
Windows98SE disc or the drive where
yourdrivers are located for your device.
Justinsert your disc that we have supplied
to you with yourkit and run the “TPPINST.EXE” file located in the “USBDrivers” folder.
If In-System Design USB2.0 storage device drivers have been previously installedin yourPC,
Windows 98SEwill automaticallydetectand load the drivers for your Que! M3 Drive.
Note: Please refer to Que! M3 Installation ManualCD for complete installation version. 5
Que M3 manual 8/23/01 7:03 PM Page 7

6
INSTALLATION
INSTALLATION (WINDOWS ME AND 2000)
Step 1: Turn on the power to your PC and all other
peripherals that are attached. Connect the Hi-Speed
USB 2.0 cable to the USB 2.0 port on the back of
your PC or Card. Attach the other end of the
Hi-Speed USB 2.0 cable to the USB 2.0 port on the
back of the Que! M3 Drive.
If you areinstalling theQue! M3 Drive on a notebook
PC equippedwith aUSB 2.0 port.Follow thedirections instep 1, then to connect the
poweradaptor, attach the round adapterplugto the power interface connector at the
back of the Que! M3Drive. Then, connect the power plug toa power outlet.
Step 2: After making the necessary connections, wait for Windows ME or 2000 to
automatically detect your Que! M3 Drive and load the necessary drivers.
Windows may ask you for the Windows ME or 2000 CD. Just insert the
Windows ME or 2000 CD into the CD-ROM drive and Windows will automatically
load the USB Mass Storagedrivers.
Congratulations! You can now drag & drop files to your Que! M3 Drive using Windows
Explorer.
If you need to partition and format your Que! M3 Drive, please refer to the Que! M3
Installation Manual CD.
For detail instructions in unplugging your Que! M3 Drive, please refer to the Que! M3
Installation Manual CD.
Note: Please refer to Que! M3 Installation Manual CD for complete installationversion.
Que M3 manual 8/23/01 7:03 PM Page 8

7
HOT SWAP/UNPLUGGING
HOT SWAP PLUG AND PLAY FEATURE
The Que! M3 Drive can be connected to your PC with power on. To do this, simply
connect the hard drive to your computer using the supplied Hi-Speed USB2.0 cable and
power supply. You can also refer to the Que! M3 Installation Manual CD for further
instructions.
UNPLUGGING QUE! M3 DRIVE FROM WINDOWS 98SE
Since there is no special utility to control the disconnection of the Que! M3 Drive from
Windows 98SE, it is recommended that you power off your computer before unplugging
the Que! M3 Drive.
NOTE: Loss or corruption of data may occur if this is not followed.
UNPLUGGING QUE! M3 DRIVE FROM WINDOWS ME OR 2000
When disconnecting your Que! M3 Drive while the PC is on, it is high highly recommended
to use the “Unplug/Eject Hardware” icon on the Task Bar. To do this, click on the
“Unplug/Eject Hardware” icon on the right corner of the Task Bar, select your Que! M3
Drive, and then click on the “Stop” button. You can also disconnect your Que! M3 Drive by
double-clicking on the “Unplug/Eject Hardware” icon and click on Stop button.
Note: Please refer to the Que! M3 Installation Manual CD for complete installation version.
Que M3 manual 8/23/01 7:03 PM Page 9

8
CARE IN HANDLING
CARE IN HANDLING YOUR QUE! M3 DRIVE
1. Place your Que! M3 Drive in a cool, dry, clean place – away from windows, heat
sources, sources of excessive vibration, dust, moisture, and cold. To prevent fire or
electrical shock, do not expose drive to rain or water. Be sure the area is well ventilated.
2. Do not use force when connecting the cables. The shape of the Hi-Speed USB2.0
cable connector and the Que! M3 Drive USB2.0 port prevents misconnection. The power
supply adapter is keyed to ensure prevention of misconnection as well. Please view
both the cable and the connection to ensure the proper connections are made.
3. Do not attempt to clean the drive with chemical solvents — this might damage the
finish. Use a clean dry cloth.
4. Be sure to read “Troubleshooting Guidelines” section regarding common operating
errors before concluding that the unit is faulty.
5. Take special care not to drop, jar, or bump Que! M3 Drive as this could damage the
drive or the information stored in it. Keep your Que! M3 Drive stationary at all times
while it is is operational.
6. When not planning to use the drive for a long period of time, disconnect from the PC
and store appropriately in a cool and dry location.
When stacking more than one Que! M3 device, please make sure that you line up the feet
with the indents to ensure the proper stability when stacked. It is recommended that no
more than 5 devices be placed in a stack. Each drive requires it’s own power supply.
Note: Please refer to Que! M3 Installation Manual CD for complete installation version.
Que M3 manual 8/23/01 7:03 PM Page 10

NOTE
9
Que M3 manual 8/23/01 7:03 PM Page 11

QPS Inc.
8015 East Crystal Drive
Anaheim, CA 92807
http://www.qps-inc.com
For Customer Use:
Enter below the Model Number and
Serial Number which are located either
on the rear, bottom or side of the unit.
Model No._____________________
Serial No._____________________
Appearance and specifications of the actual
mechanism could differ based on your order.
Que M3 manual 8/23/01 7:04 PM Page 12