Qtx PAR100W User manual

www.avsl.com 154.029UK User Manual
PAR100W
White LED PAR Can
Item ref: 154.029UK
User Manual
Thank you for choosing the PAR100W, A lightweight and compact LED PAR Can fitted with 18 bright 1W
cool white LEDs. This unit can be controlled by auto, sound-to-light, master/slave programs or via DMX
and provides a great value solution for white background wash and spot illumination.
In the box:
Your PAR100W should arrive with you in a single carton in good condition. The carton should contain
1 x main unit with bracket and screws, 1x remote control, 1 x UK IEC mains lead and 1 x manual.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then
check the unit before continuing use.
Please read through this manual thoroughly before use, any damage
Caused by misuse of product will not be covered by warranty.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.

www.avsl.com 154.029UK User Manual
Placement:
•Use the included mounting bracket to fix to a stand or lighting truss
•Keep away from damp or dusty environments
•Ensure adequate airflow around the fixture housings
•Ensure adequate access to controls and connections
Cleaning:
•Use a soft cloth with a neutral detergent to clean the casing as required
•Regularly use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
•Do not use strong solvents for cleaning the unit
Rear panel controls:
1. Manual control buttons
2. DMX Signal in
3. DMX signal out
4. LED display
5. IEC power in (fused)
6. IEC power out
Manual control menu:
Press the “MENU” button to enter the settings menu.
Press “UP” and “DOWN”buttons to navigate through various setting functions.
Press “ENTER”button to save the desired setting.
Menu
Number range
Function and description
A001
A001-A512
DMX512 address settings
ADYE
ADYE or ADno
DMX512 Master on or off (Slave)
rEYE
rEYE or REno
Remote control on or off
AU01
AU01-AU07
Brightness select
2.
3.
4.
5.
6.
1.

www.avsl.com 154.029UK User Manual
FF00
FF00-FF99
Auto jump setting (speed slow to fast)
EE00
EE00-EE99
Auto fade setting (speed slow to fast)
CC00
CC00-CC99
Auto pulse setting (speed slow to fast)
F000
F000-F255
Strobe setting (speed slow to fast)
SOUD
SOUD
Sound to light with strobe setting
SUND
SUND
Sound to light jump change setting
r000
r000-r255
First 6pcs LED dimming (0-100%)
G000
G000-G255
Second 6pcs LED dimming (0-100%)
b000
b000-B255
Third 6pcs LED dimming (0-100%)
Remote control:
The PAR100W is supplied with an I.R. remote control for quick access to most of the basic functions of the
unit. This must be aimed at the front of the unit where there is a remote receiver and has a maximum
range of approximately 4-5m. Controls and functions are listed on the diagram below:
DMX mode:
The PAR100W can be controlled by DMX signal, simply connect the DMX signal source to the DMX input
on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping
through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct
start address by using the “UP”and “DOWN”buttons and “ENTER”to confirm.
This unit has 7 DMX channels as indicated in the table below:
Channel
Value
Function
Setting
CH1
0-255
Master dimming (0-100%)
Available in all modes
CH2
0-255
First 6pcs LED dimming (0-100%)
CH3
0-255
Second 6pcs LED dimming (0-100%)
Dimming modes only
CH4
0-255
Third 6pcs LED dimming (0-100%)
CH5
0-255
Strobe (speed slow to fast)
Available in all modes
CH6
0-50
Open CH1-CH5
51-100
Brightness select
101-150
Auto jump setting
1. Power = Remote on/off
2. Auto = Auto jump open/off
3. Mode = Auto fade open/off
4. Flash = Strobe open/off
5. -- = Decrease option setting
6. R = First 6pcs LED open/off
7. G = Second 6pcs LED open/off
8. Enter = Save option setting
9. Music = Sound to light mode
open/off
10. Motor = Brightness select
11. + = Increase option setting
12. Dmx = DMX512 open/off
13. B = Third 6pcs LED open/off
14. W = No function on this model
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.

www.avsl.com 154.029UK User Manual
CH6 (cont’d)
151-200
Auto fade setting
201-250
Auto pulse setting
251-255
Open sound to light setting
CH7
0-255
Speed from slow to fast
Auto modes only
Specifications:
Power supply
110-240Vac, 50/60Hz (IEC)
Power consumption
30W
Fuse rating
T1.0A
LED quantity
18 x 1W (cool white)
DMX channels
7
Beam angle
25°
Projection distance
10m (approx.)
Dimensions
200 x 200 x 78mm (without Bracket)
Weight
1.14kg
Troubleshooting:
No power (mains)
Check mains voltage is correct, and outlet is switched on
Check IEC lead and fuse (if fuse continually blows, refer to your dealer)
No light output
Check control panel mode settings
Check DMX settings from controller (dimmer levels, blackout etc.)
Unresponsive to DMX
Check that unit is in DMX mode and ensure DMX address remains lit to
confirm receiving DMX signal
Check DMX controller is not set to black out
Check DMX controller is on correct fixture/page
Check master dimmer value
Check correct DMX address is set
Check DMX connection and leads
Overheating/
cutting out
Ensure adequate ventilation and unit is not too close to a heat source
This product is classed as Electrical or Electronic equipment and should not be disposed
with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2021 AVSL Group Ltd, Unit 2 Bridgewater Park, AVSL (Europe) Ltd, Unit 3D North Point House,
Taylor Road, Trafford Park, Manchester. M41 7JQ. North Point Bus. Park, New Mallow Road, Cork, Ireland.