Qtx PL-COB6 User manual

PL-COB6
Par64 6 x 30W COB (RGB)
Item ref: 154.036UK
User Manual
Please read this manual thoroughly before use.
Any damage caused by misuse of the product will void the warranty.
A lightweight and compact LED PAR Can fitted with 6 x 30W COB ultra bright LEDs. This unit can be controlled by auto,
sound-to-light, master/slave programs or via DMX. A great value solution for background wash illumination.
To prevent risk of fire or electric shock, do not expose unit to rain or moisture. In case of accidental spillage on the unit,
disconnect the main and allow unit to dry completely. Have unit check by professional personnel to ensure safety before
further use.
Contents
PAR Can unit with hanging bracket, mains lead and manual. Please check all contents are complete before use, return to
your dealer if anything is missing.
Always check the correct voltage and the condition of the IEC lead before connecting to a power outlet.
Always ensure any DMX leads used are in good condition with no short connections or damaged plugs.

154.036UK User Manual
Product Layout
1. Microphone
2. 7 segment LED Display
3. 4 Button Menu Settings
4. DMX in
5. DMX out
6. Cooling fan DO NOT OBSTRUCT
7. IEC in
Menu using 4 Button Manual Control
Display
Description
1
D001 - 512
DMX Settings
2
So01
Sound to Light
So02
Sound to Light Strobe
Au01
Red (see ST for Strobe speed)
Au02
Green (see ST for Strobe speed)
Au03
Dark Blue (see ST for Strobe speed)
Au04
Yellow (see ST for Strobe speed)
Au05
Light Blue (see ST for Strobe speed)
Au06
Purple (see ST for Strobe speed)
Au07
White (see ST for Strobe speed)
Au08
Red/Blue colour change (see SP for speed setting)
Au09
Colour Jump (see SP for speed setting)
Au10
Colour Mix (see SP for speed setting)
3
ST00
MUST BE ST00 TO AVOID STROBE EFFECT ON Au01 - Au07
ST01 - 16
Strobe speed (slow to fast) on Au01 - Au07
4
SP01 - 16
Speed setting (slow to fast) on Au08 - Au10
5
r000 - 255
Red 0 –100% Dimmer
6
G000 –255
Green 0 –100% Dimmer
7
b000 - 255
Blue 0 –100% Dimmer

154.036UK User Manual
Sound-to-light
To select the sound-to-light function, using the 4 button manual control buttons on the back panel. Choose sequence No
2 (So01-Au10) and press enter. Again using the up/down buttons find So01 or So02 and press enter to select.
Master/slave:
To use in Master/Slave mode.
On the Master unit (first in the daisy chain), using the 4 button manual control buttons on the back panel, select your
chosen program. All other subsequent units in the Master/Slave daisy chain should be set to ‘d001’.
DMX mode
To control the fixture via a DMX controller, simply connect the DMX signal source (controller) to the ‘DMX in’ of the unit
using a balanced XLR lead. Additional fixtures can be controlled by the same DMX signal. Using the ‘DMX out’ of the first
Parcan in the chain, connect to the ‘DMX in’ of the 2nd unit. ‘DMX out of the 2nd into ‘DMX in’ on ther 3rd and so on...
Using the 4 button manual control up/down keys, (sequence 1 d001-d512) ensure the correct DMX start address is set.
DMX Value Reference
7 channel mode
Channel
DMX Value
Function
CH1
001 - 255
Master dimming for CH5, CH6 & CH7 (0-100%)
CH2
001 - 255
Strobe (slow to fast)
CH3
001 - 050
No Function
051 - 100
Colour Jump
101 - 150
Gradual colour Change
151 - 200
Colour Fade
201 - 255
Sound activation
CH4
001 - 255
Speed Control for CH3
CH5
001 - 255
RED 0-100% (Ensure CH1 has DMX value of +021)
CH6
001 - 255
GREED 0-100% (Ensure CH1 has DMX value of +021)
CH7
001 - 255
BLUE 0-100% (Ensure CH1 has DMX value of +021)
Troubleshooting
No power (mains)
Check mains voltage is correct and outlet is switched on
Check IEC lead and fuse (if fuse continually blows, refer to your dealer)
No LED display
Press any control panel button and check LED setting in menu
No light output
Check control panel mode settings
Check DMX settings from controller (dimmer levels, blackout etc.)
No strobe output
Check strobe settings on control panel or from DMX controller
Unresponsive to DMX
Check that unit is in DMX mode
Check DMX controller is not set to black out
Check DMX controller is on correct fixture/page
Check master dimmer value
Check correct DMX address is set
Check DMX connection and leads
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste
at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2016 AVSL Group Ltd.