Qtx Recharge Performer User manual

www.avsl.com 151.546UK User Manual
Recharge Performer
LED PAR Bar with Tripod
Item ref: 151.546UK
User Manual
Ideal for performers, this complete portable lighting set
comprising 4 RGBW PAR lights is powered from a rechargeable
T-bar with an internal lithium battery that provides up to 6
hours use without the need for additional power. Easily
controlled via DMX, infra-red remote control or internal auto
and sound-activated programs selectable from the rear control
panel. Each lighting fixture is angle-adjustable to distribute
colour washes around the room. Supplied with 2.3m telescopic
tripod stand and carry bags making it ideal for transporting to
venues and events where power isn't readily available.
In the box:
Your Recharge Performer should arrive with you in a single carton in good condition. The carton should
contain: 1 x T-bar with 4 RGBW PAR cans attached, 1 x 2.3m Tripod Stand, 1 x Remote Control, 1 x UK
3m IEC mains lead, 1 x T-Bar Carry Bag, 1 x Tripod Stand Carry Bag and 1 x user manual.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then
check the unit before continuing use.
Please read through this manual thoroughly before use, any damage
caused by misuse of product will not be covered by warranty.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.

www.avsl.com 151.546UK User Manual
Placement:
•Open the included tripod stand legs onto the floor ensuring the thumbscrews are tightened and it’s
set down on a flat stable surface away from walkways or where it can be easily knocked over.
•Attach the T-Bar to the top of the stand and tighten the thumbscrew ensuring its secure.
•Keep the unit away from damp or dusty environments.
•Ensure adequate air-flow around the fixture housings.
•Ensure adequate access to controls and connections.
•Do not aim LED or laser output directly into line of sight, as this can result in eye injury.
Cleaning:
•Use a soft cloth with a neutral detergent to clean the casing as required.
•Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups.
•Do not use strong solvents for cleaning the unit.
Rear panel and controls:
1. Power switch
2. IEC input (110-240 Vac, 50/60 Hz)
3. Earth screw (do not remove)
4. DMX input
5. DMX output
6. Control panel
7. LED display
8. Microphone
9. Battery charge status
Manual control menu:
Press the “MENU” button to enter the settings menu.
Press “UP” and “DOWN” buttons to navigate through various setting functions.
Press “ENTER” button to confirm the desired setting.
Sequence
Number
Display
Sub-Menu
Function/Action
1
d001 –d512
001 - 512
DMX address setting
2
IP.01 –IP.64
001 -512
IP mode
3
A1.01
A1.01 –A1.18
Static Colour. Select one of 18 colour options
4
A2.01
A2.01 –A2.32
Colour Jump. A2.01 (slowest) A2.32 (fastest)
5
A3.01
A3.01 –A3.19
Multi Colour. Different Colour selection available
1.
2.
3.
4.
5.
6.
7.
8.
9.

www.avsl.com 151.546UK User Manual
6
A4.01
A4.01 –A4.04
Sound to Light Function
7
A5.01
A5.01 –A5.32
Strobe Function A5.01(slowest) A5.32 (fastest)
8
r000 –r255
Adjust red colour intensity. r000 (off) r252
(brightest)
9
G000 –G255
Adjust green colour intensity. G000 (off) G252
(brightest)
10
b000 –b255
Adjust blue colour intensity. b000 (off) b252
(brightest)
11
u000 –u252
Adjust white colour intensity. u000 (off) u252
(brightest)
DMX mode:
The Recharge Performer can be controlled by DMX signal, simply connect the DMX signal source to the
DMX input on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal
by looping through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm
the correct start address by using the “UP”and “DOWN”buttons and “ENTER”. The A on the LED
display will begin to flash once it’s received the DMX signal from the controller. This unit has 8 DMX
channels as indicated in the tables below:
8 Channel:
Channel
Value
Function
1
0 -10
Macro A1
11 - 50
Macro A2
51 - 100
Macro A3
101 - 150
Macro A4
201 - 255
Macro A5
210 –255
Red + Green + Blue
2
0 - 255
Macro Colour
3
0 - 255
Speed Adjustment
4
0 - 255
Master Dimmer
5
0 - 255
Red Dimmer
6
0 - 255
Green Dimmer
7
0 - 255
Blue Dimmer
8
0 - 255
White Dimmer
Remote control:
All lights on
Colour gradual change
PAR and effects all
Colour adjust -/+
Blackout on/off
Colour jump change
Running effect -/+
Strobe mode
DMX Channel -/+
Sound active mode
Speed adjust -/+

www.avsl.com 151.546UK User Manual
Specifications:
Power supply
100-240Vac, 50/60Hz
Battery
12V 7200maH lithium rechargeable battery
Battery life
Up to 6 hours
Fuse rating
F3A
Effects
4x RGBW LED PAR
Modes
Auto, sound, master/slave, DMX512
DMX channels
8CH
Dimensions: stand
900 x 130 x 130mm (collapsed)
Height adjustment
1.8 to 2.3m
Weight: stand
1.3kg
Dimensions: effects bar
740 x 210 x 150mm
Weight: effects bar
3.7kg
Troubleshooting:
No power
Check unit has sufficient charge if using without power source
Check mains voltage is correct and outlet is switched on
Check IEC lead and fuse (if fuse continually blows, refer to your dealer)
No light output
Check control panel mode settings
Check DIN connections for each fixture
Unresponsive to
DMX
Check that unit is in DMX mode and ensure the “d”on the DMX address
flashes to confirm it’s receiving a DMX signal
Check DMX controller is not set to black out
Check DMX controller is on correct fixture/page
Check master dimmer value
Check correct DMX address is set
Check DMX connection and leads
Overheating/
cutting out
Ensure adequate ventilation and unit is not too close to a heat source
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste
at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2023 AVSL Group Ltd, Unit 2 Bridgewater Park, AVSL (Europe) Ltd, Unit 3D North Point House,
Taylor Road, Trafford Park, Manchester. M41 7JQ. North Point Bus. Park, New Mallow Road, Cork, Ireland.