Qtx PAR54 User manual

www.avsl.com 154.035UK User Manual
PAR54
4in1 LED PAR Can
Item ref: 154.035UK
User Manual
Thank you for choosing the PAR54, a lightweight and compact LED PAR Can fitted with 9x 6W 4-in-1
RGBW LEDs. This unit can be controlled by auto, sound-to-light, master/slave programs or via 8 channel
DMX. A versatile and value solution for background wash illumination requirements.
In the box:
Your PAR54 should arrive with you in a single carton in good condition. The carton should contain
1 x main unit with bracket and screws, 1x remote control, 1 x UK IEC mains lead and 1 x user guide.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then
check the unit before continuing use.
Please read through this manual thoroughly before use, any damage
Caused by misuse of product will not be covered by warranty.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.

www.avsl.com 154.035UK User Manual
Placement:
•Use the included mounting bracket to fix to a stand or lighting truss
•Keep away from damp or dusty environments
•Ensure adequate airflow around the fixture housings
•Ensure adequate access to controls and connections
Cleaning:
•Use a soft cloth with a neutral detergent to clean the casing as required
•Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
•Do not use strong solvents for cleaning the unit
Rear panel controls:
1. Manual control buttons
2. DMX Signal in
3. DMX signal out
4. LED display
5. IEC power in (fused)
Manual control menu:
Press the “MENU” button to enter the settings menu.
Press “UP” and “DOWN”buttons to navigate through various setting functions.
Press “ENTER”button to save the desired setting.
Menu
Number range
Function and description
A001
A001-A512
DMX512 address setting
IrYE
IrYE or Irno
IR remote control on or off
AU01
AU01-AU07
Manual colour selection
FF00
FF00-FF99
Colour jump setting (speed slow to fast)
2.
3.
4.
5.
1.

www.avsl.com 154.035UK User Manual
EE00
EE00-EE99
Colour fade setting (speed slow to fast)
CC00
CC00-CC99
Colour pulse setting (speed slow to fast)
F000
F000-F255
Strobe setting (speed slow to fast)
SoUD
SoU0-SoU9
Sound to light colour jump setting (sensitivity high to low)
SUnD
SUn0-SUn9
Sound to light colour pulse setting (sensitivity high to low)
r000
r000-r255
Red dimming (0-100%)
G000
G000-G255
Green dimming (0-100%)
b000
b000-b255
Blue dimming (0-100%)
u000
u000-u255
White dimming (0-100%)
o000
o000-o255
IR remote control dimming (dark to bright)
Remote control:
The PAR54 is supplied with an I.R. remote control for quick access to most of the basic functions of the
unit. This has a maximum range of approximately 4-5m and must be aimed towards the front of the unit.
Controls and functions are listed on the diagram below:
DMX mode:
The PAR54 can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on
the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping
through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct
start address by using the “UP”and “DOWN”buttons and “ENTER”to confirm.
This unit has 8 DMX channels as indicated in the table below:
Channel
Value
Function
CH1
0-255
Master dimming (0-100%)
CH2
10-255
Strobe (speed slow to fast)
CH3
0-50
CH1-CH6 control
051-100
Manual colour selection
101-150
Colour jump
151-200
Colour fade
201-250
Colour pulse
CH4
0-255
Function speed control (slow to fast)
1. Power = Remote on/off
2. + = Increase option setting
3. DMX = DMX512 open/off
4. Auto = Automatic mode
5. Red = Red open/off
6. Motor = Manual colour select
7. Jump = Colour jump mode
8. Sound = Sound activated mode
9. -- = Decrease option setting
10. Green = Green open/off
11. Blue = Blue open/off
12. White = White open/off
13. Flash = Strobe open/off
14. Gradual = Colour fade mode
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.

www.avsl.com 154.035UK User Manual
CH5
0-255
Red dimming (0-100%)
CH6
0-255
Green dimming (0-100%)
CH7
0-255
Blue dimming (0-100%)
CH8
0-255
White dimming (0-100%)
Specifications:
Power supply
110-240Vac, 50/60Hz (IEC)
Power consumption
36W
Fuse rating
F3A
LED quantity
9 x 6W RGBW
DMX channels
8
Beam angle
45°
Dimensions
205 x 205 x 80mm
Weight
955g
Troubleshooting:
No power (mains)
Check mains voltage is correct, and outlet is switched on
Check IEC lead and fuse (if fuse continually blows, refer to your dealer)
No light output
Check control panel mode settings
Check DMX settings from controller (dimmer levels, blackout etc.)
Unresponsive to DMX
Check that unit is in DMX mode and ensure DMX address remains lit to
confirm receiving DMX signal
Check DMX controller is not set to black out
Check DMX controller is on correct fixture/page
Check master dimmer value
Check correct DMX address is set
Check DMX connection and leads
Overheating/
cutting out
Ensure adequate ventilation and unit is not too close to a heat source
This product is classed as Electrical or Electronic equipment and should not be disposed
with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2022 AVSL Group Ltd, Unit 2 Bridgewater Park, AVSL (Europe) Ltd, Unit 3D North Point House,
Taylor Road, Trafford Park, Manchester. M41 7JQ. North Point Bus. Park, New Mallow Road, Cork, Ireland.