QUAN SHENG TG-007 User manual

USER'S MANUAL
TG-007
0700
！

PRECAUTIONS BEFORE USING
Please read the User's Manual before using. It gives you important information about how
to operate the portable radio.
Please put the radio and accessories where the children can not touch.
Maintenance can only be performed by professional technicians.
Please use the standard battery pack and charger in order not to destroy the radio.
Please use the standard antenna,in order not to shorten the distance.
Do not expose the radio to sunlight for a long period of time, nor put it near the heat, nor
use it in a high temperature environment.
Do not put it in extreme dust nor wet or on unsteady surfaces.
Keep it dry. (Rain or moisture will erode the electronic board).
Do not transmit when the antenna is not installed.
If you find bad smell or smog,please turn off the radio immediately.And take the battery off
the radio,then contact with QS agent.
Thank you for purchasing this Radio.
We believe this easy-to-use radio will provide reliable and
dependable communication.
QS Radio incorporates the latest advanced technology.
As a result, we know that you will be pleased with the quality
and features of this product.
007

CONTENTS
FEATURES
UHF/VHF dual band receive/transmit
FM radio (65-108MHz)
Large LCD display
High capacity Li-ion battery and smart charger
PC programmable
Fast MENU operation
Emergency alarm function
H/L output power selective
Squelch level adjustable
Multi power saving function
Voice prompt(Chinese or English)
Reminding switch
Dual display of frequency and channel
Channel name edit
Channel storing
Frequency/Channel mode shift
Multi LCD backlight selective
Time of backlight auto off selective
VOX function
Dual-watch operation
Receive/Transmit code setting separately
Cable clone
CTCSS/DCS code search automatically
Frequency deviation and offset direction
setting
Multi step frequency
Busy channel lock
Time-out-timer(TOT)
Multi display mode: channel/channel-frequency/
channel name
Multi scan function selective
Channel scan additive
Wide/Narrow bandwidth selective
Main/Sub channel shift
1750Hz call tone
Reminding of repeater transfer
Auto-keylock
128 channels
Channel delete function
Reset
DTMF function
PTT-ID
CTCSS/DCS
Reverse function
Stun/Kill/Revive
Single call/Group call/Troop call
01
02
02
03
04
04
05
06-07
08
09
09
09
10-12
13
14-22
23
23
SUPPLIED ACCESSORIES
READY TO WORK
CHARGING NOTES (1)
CHARGING NOTES (2)
INSTALLING ANTENNA
INSTALLING BELT CLIP
INSTALLING EXTERNAL SPEAKER/MICROPHONE
ATTACHING THE BATTERY PACK
DIAGRAM
BASIC OPERATION
LCD DISPLAY
LCD ICON EXPLANATION
SHORTCUT KEYS
MENU FUNCTIONS
FAST MENU OPERATION FLOW
FUNCTION OPERATION AND DESCRIPTION
SQUELCH LEVEL（SQL）

32
32
33
33
34
34
35
35
36
36-37
38
38
39
39
40
40
41
SCAN RESUMED MODE
PTT ID（PTT-ID）
PTT ID PROLONG TIME（PTT-LT）
A CHANNEL DISPLAY MODE（MDF-A）
B ChANNEL DISPLAY MODE（MDF-B）
BUSY CHANNEL LOCK（BCL）
AUTO KEYPAD LOCK（AUTOLK）
FREQUENCY OFFSET DIRECTION SETTING（SFT-D）
FREQUENCY DEVIATION（OFFSET）
CHANNEL STORE （MEM-CH）
CHANNEL DELETE（DEL-CH）
STANDBY BACKLIGHT（WT-LED）
RX BACKLIGHT（RX-LED）
TX BACKLIGHT（TX-LED）
ALARM MODE（AL-MOD）
OPTIONAL SIGNAL (OPTSIG)
MUTE MODE SELECTION (SPMUTE)
23
24
24
25
25
26
26
27
27
28
28
29
29
30
30
31
31
STEP FREQUENCY(STEP)
OUTPUT POWER (TXP)
BATTERY SAVING (SAVE)
VOX FUNCTION (VOX)
WIDE/NARROW BANDWIDTH (W/N)
AUTO BACKLIGHT （ABR)
DUAL-WATCH OPERATION (TDR)
KEYPAD SOUND REMINGDING (BEEP)
TIME-OUT-TIMER (TOT)
RECEIVING DCS (R-DCS)
RECEIVING CTCSS (R-CTCS)
TRANSMITTING DCS (T-DCS)
TRANSMITTING CTCSS (T-CTCS)
VOICE REMINDING (VOICE)
ANI-ID (ANI-ID)
DTMFST(DTMFST)
SIGNAL CODE (S-CODE)
CONTENTS CONTENTS

48
48
49
49
50
50
50
51-52
52-56
57
58-59
60
REVERSE FUNCTION（ R ）
FREQUENCY SCANNING
CHANNEL SCANNING
AUTOMATIC SEARCH FM RADIO（FM）
SEARCH CTCSS/DCS CODE
CURSOR“▲” CONVERSION（A/B）
HIGH/LOW POWER FAST CONVERSION
STUN/KILL/REVIVE
SINGLE CALII/GROUP CALL/TROOP CALL
CTCSS TABLE LIST
DCS TABLE LIST
SPECIFICATONS
41
42
42
43
43
44
44
45
45
45
46
46
47
47
47
47
47
TAIL TONE ELIMINATION（STE）
TAIL TONE ELIMINATION WHEN THROUGH REPEATER（RP-SET）
DELAY TIME OF TAIL TONE ELIMINATION WHEN THROUGH REPEATER（RPT-RL）
DISPLAYS WHEN POWER ON（PONMSG）
CALL END WARNING TONE（ROGER）
DUAL-WATCH OPERATION（TDR-AB）
RESET（RESET）
VFO-MENU INITIALIZATION
ALL-MENU AND CHANNEL INITIALIZATION
MANUALLY LOCK THE KEYPADS
FM RADIO（FM）
RAPID ALERT（ALARM）
JACKLIGHT
MONITOR（MON）
CABLE CLONE（COPING）
CHANNEL/FREQUENCY MODE CONVERSION（VF0/MR）
TX 1750Hz CALL TONE
CONTENTS CONTENTS

SUPPLIED ACCESSORIES READY TO WORK
Battery packs are not charged when they are shipped, charge them before use.
Initially charging the battery pack after purchase or extended storage (longer than 2 months) will
not bring the battery pack to its greatest capacity or its normal capacity, which can be done only
after repeatedly charging and discharging for two or three times.
CHARGING NOTES (1)
⊙
⊙
⊙
After the battery is charged to its highest capacity, don’t charge anymore, and
remove it from the charger. Otherwise it will affect the life of the battery.
Do not short-circuit the battery terminals or throw the battery into fire.
Never attempt to remove the casing from the battery pack.
!
Please turn the power off before charging. It will affect the battery life when charging the
power-on radio.
If the radio still shows low power after the normal charge, please change a new battery.
The average usage time of battery pack is 13 hours. Average usage time is 5% for transmitting,
5% for receiving and 90% for standby.
01 02
SUPPLIED ACCESSORIES
STANDARD SUPPLIED ACCESSORIES
STANDARD SUPPLIED ACCESSORIES
Carefully unpack the portable radio. We suggest that you check the following
items before you throw away the packing materials.
Antenna Li-ion Battery (7.2V)
Adapter
Belt Clip
User's manual
Car charger
(Optional accessory)
Charger
Portable radio
Antenna
Li-ion battery (7.2V)
Belt clip
charger
Adapter
User's manual
1
1
1
1
1
1
1
ITEM QTY
USER'S MANUAL
TG-007
0700
！

READY TO WORK READY TO WORK
The radio is not fully rain resistant while using the
external speaker/microphone.
⊙
ATTACHING THE BATTERY PACK
INSTALLING EXTERNAL SPEAKER/MICROPHONE
Insert the speaker/microphone plugs into the speaker/microphone jacks. Slide the battery pack into the back of the radio in the direction of the arrow(①), then lock it
with the battery release button. Slide the battery pack until the battery release button makes a
"clicking" sound.
05 06
MENU EXIT
^
^
1STEP 2TXP 3SAVE
0SQL6ABR
5WN
7TDR
4VOX
8BEEP 9TOT #
*SCAN
BAND
A/B
VFO
MR

READY TO WORK DIAGRAM
DIAGRAM
Turn off the radio before releasing the battery pack.
Push the battery release button in the direction of the arrow(①)as shown below.
At the same time push the battery back.
The battery pack is then released.
RELEASING THE BATTERY PACK
BAND key
Indicator
Menu/Confirm key
keypad
Antenna
LCD display
VFO/MR key
A/B key
Sp/Mic/Programming
Jacks
Battery pack
Microphone
Exit key
Up/Down key
Speaker
Jacklight
Power/Volume switch
PTT switch
Jacklight/Monitor switch
FM radio/Alarm Key
07 08
MENU EXIT
^
^
1STEP 2TXP 3SAVE
0SQL6ABR
5WN
7TDR
4VOX
8BEEP 9TOT
*
#
SCAN
VFO
MR
A/B
BAND

BASIC OPERATION BASIC OPERATION
LCD DISPLAY
LCD ICON EXPLANATION
This symbol will appear when transmitting, it means transmitting CTCSS code.
This symbol will appear when transmitting, it means transmitting DCS code.
BASIC OPERATION
PTT Key
Transmitting/Receiving switch key: Press "PTT" to transmit and speak to microphone.
Release "PTT" to receive.
CALL Key (FM/Alarm)
Press it for a short time to turn on FM radio function.Operate it again to turn it off.
Press it for a long time to turn on Alarm function.Operate it again to turn it off.
MON Key (Jacklight/Monitor)
Press it for a short time to turn on Jacklight. Operate it again to turn it off.
Press it for a long time to turn on Monitor function.
Press Jacklight/Monitor key and turn the power on, to enter channel clone condition, it can copy one
radio's channel parameters to another one. Cloning cable must be used to connect these two radios.
Band Key
UHF/VHF frequency band shift;
FM radio 65-75/76-108MHz shift;
In transmitting mode, press Band key to send 1750Hz call tone.
LCD Display
Display all the working condition.
In frequency mode, this symbol will appear, it means transmitting frequency equals
receiving frequency plus the offset frequency. It can set different frequencies.
In frequency mode, it will appear this symbol, it means transmitting frequency equals
receiving frequency minus the offset frequency. It can set different frequencies.
It means the transmitting and receiving frequencies are different at current channel.
It means it already set dual watch operation function.
VOX function
Reverse function
Narrow bandwidth
It represents the remaining battery. when the battery is almost used up,the frame
starts to flicker and it forbids to transmit.
It means the keypad is locked, pressing key #/Lock can unlock the keypad.
Low output power.
Current frequency and current menu setting.
Signal strength.
Channel number display
Frequency ending display
09 10

BASIC OPERATION BASIC OPERATION
BASIC OPERATION
Function Keypads
Menu/Confirm key：
It’s used for activating the menu, choose each menu item and confirm the parameter.
Up key (Press more than 2s, the channel and frequency will move upward rapidly; In scannig, press
Up key to upward scanning.):
Down key (Press more than 2s, the channel and frequency will move downward rapidly; In scannig,
press Up key to downward scanning)：
Press key Exit to exit and clear:
Number Keypads
Input the information to the radio.
Input the non-standard CTCSS code in non-standard mode.
In transmitting mode, press number keys to send corresponding DTMF code.
MENU
EXIT
BASIC OPERATION
*SCAN Key
Press Scan key for a short time to activate RX/TX reverse function.
Press Scan key for more than 2s to start frequency or channel scanning.
In FM radio mode, press Scan key to automatically search FM stations.
In CTCSS/DCS mode, press Scan key to start CTCSS/DCS code scanning.
Indicator
Transmitting: the red light glitter
Receiving: the green light glitter
Sp/Mic/Programming Jacks
It’s used for external speaker/microphone.
It’s used to connect cable for computer programming or application upgrade.
# Key
In channel mode, press # for a short time to switch H/L output power.
Press # key for more than 2 seconds to lock or unlock the keypad.
Power/Volume Switch
Turn the Power/Volume switch clockwise to turn the power on.
Turn the Power/Volume switch counter-clockwise to turn the power off.
Turn the Power/Volume switch clockwise to volume up, otherwise it’s volume down.
11 12
SCAN
MENU EXIT
^
^
1STEP 2TXP 3SAVE
0SQL6ABR
5WN
7TDR
4VOX
8BEEP 9TOT #
*
A B C D
1 2 3 *
4 5 6 0
78 9 #