Quatech PCD-X/U132-E Instruction Manual

Adding a New Network Connection
In some cases, the Dashboard software provided by your mobile SIM provider
does not recognize your modem card. We are working with the various modem
card manufacturers and mobile ISP's to provide a satisfactory solution to this
problem, but in the interim period, it is possible to configure your Internet access
manually using the Windows New Network Wizard. The process for Windows
2000 is shown below, it is very similar in Windows XP.
From the "Network Connection” icon in your device manager, click "File and
chose New Connection" from the drop down menu. The following dialog should
appear..., click "Next"

Select “Connect to the Internet” and click “Next”
Select “Set up my connection manually” and click “Next”

Select “Connect using a dial up modem” and click “Next”
On the Select a Device page, select your PCMCIA card you will be using to
connect to the internet.

Type in the name of your Internet Service Provider eg: Verizon and click “Next”
Enter in the phone number needed for your Internet Service Provider eg:Verizon
is #777

Enter the correct Username and Password for your Internet Service Provider and
click "Next", and "Finish" on the final dialog box.
Username:
Your cell phone
[email protected]
Password:
vzw
Confirm password:
vzw
After clicking Finish, the Connect Dialog will pop up. Click Dial to make the
connection.