Qudo TYPHOON QUTYPGSSBK User manual

1 Carton
1/11
TYPHOON GAMING SIT STAND DESK
QUTYPGSSBK
For spare parts or hardware call 1300 OFFICE (1300 633 423)

Estimated Assembly Time: 3 minutes
2/11
General Advice
NOTE
CAUTION
• Do not use this product unless all bolts, screws and knobs are firmly secured.
• Check that all bolts, screws and knobs are securely tightened at least every 4 months.
WARNING
• If parts are missing, broken, damaged or worn, stop using the product until all repairs
are made using manufacturer authorised parts.
• Failure to follow these warnings could result in serious injury.
• Please check you have all partslist before assembling.
• If you are missing any part, please contact 1300 OFFICE (1300 633 423).
• Please ensure you have the name of the item, required hardware part and quantity.
• Please retain your receipt as proof of purchase to validate your warranty.

3/11
1set
Parts List
1pc 1pc
3
1set
Hardware Spare Parts Number- HWTYPGSSLE

4/11
Assembly
Step 1
Careful
Make sure the dimensions and weight capacity of the table meet
the requirements prior to placing this SIT STAND unit on top.
Any overhang of this SIT STAND unit on a desk may result in
the unit being unbalanced.

5/11
Hang the junction plate on the pre-assembled
knob and tighten by raising levers. To remove keyboard tray, open
the levers to slide tray out.

6/11

7/11
Insert the USB cable to
control the lights

8/11

How To Replace Batteries
9/11

10 /11