Quincy QOCS 25 User manual

Quincy
Condensate management
QOCS 25, QOCS 53, QOCS 106, QOCS 180, QOCS 360, QOCS 636,
QOCS 1325, QOCS 2650, QOCS 5300
Instruction book

Quincy
Condensate management
QOCS 25, QOCS 53, QOCS 106, QOCS 180, QOCS 360,
QOCS 636, QOCS 1325, QOCS 2650, QOCS 5300
Instruction book
Original instructions
Copyright notice
Any unauthorized use or copying of the contents or any part thereof is prohibited.
This applies in particular to trademarks, model denominations, part numbers and
drawings.
This instruction book is valid for CE as well as non-CE labelled machines. It meets the
requirements for instructions specified by the applicable European directives as
identified in the Declaration of Conformity.
2021 - 05
No. 2920 7197 51
www.quincycompressor.com

Table of contents
1 Safety precautions..........................................................................................................3
1.1 SAFETY ICONS................................................................................................................................... 3
1.2 GENERAL SAFETY PRECAUTIONS............................................................................................................3
1.3 SAFETY PRECAUTIONS DURING INSTALLATION...........................................................................................3
1.4 SAFETY PRECAUTIONS DURING OPERATION.............................................................................................. 4
1.5 SAFETY PRECAUTIONS DURING MAINTENANCE OR REPAIR........................................................................... 5
1.6 DISMANTLING AND DISPOSAL.................................................................................................................5
2 General description........................................................................................................7
2.1 INTRODUCTION...................................................................................................................................7
2.2 OPERATION.......................................................................................................................................7
3 Installation.....................................................................................................................12
3.1 DIMENSION DRAWINGS.......................................................................................................................12
3.2 INSTALLATION PROCEDURE................................................................................................................. 13
4 Operating instructions................................................................................................. 16
4.1 PUTTING INTO OPERATION..................................................................................................................16
5 Maintenance..................................................................................................................19
5.1 MAINTENANCE................................................................................................................................. 19
5.2 OPTIONS........................................................................................................................................ 21
6 Problem solving............................................................................................................22
7 Technical data...............................................................................................................23
7.1 REFERENCE CONDITIONS AND LIMITATIONS............................................................................................ 23
7.2 TECHNICAL DATA..............................................................................................................................23
Instruction book
2 2920 7197 51

1 Safety precautions
1.1 Safety icons
Explanation
Danger to life
Warning
Important note
1.2 General safety precautions
All responsibility for any damage or injury resulting from neglecting these precautions, or
non-observance of the normal caution and care required for installation, operation,
maintenance and repair, even if not expressly stated, will be disclaimed by the
manufacturer.
1. The operator must employ safe working practices and observe all related local work safety
requirements and regulations.
2. If any of the following statements does not comply with local legislation, the stricter of the
two shall apply.
3. Installation, operation, maintenance and repair work must only be performed by authorised,
trained, specialised personnel.
4. Before carrying out any maintenance, repair work, adjustment or any other non-routine
checks, stop the device. In addition, the power isolating switch must be opened and locked.
1.3 Safety precautions during installation
1. Install the equipment where the ambient air is cool and as clean as possible. Consult section
Reference conditions and limitations.
2. During installation or any other intervention on the equipment or one of the connected
machines, the machines must be stopped, de-energized and the isolating switch opened
and locked before any maintenance or repair. As a further safeguard, persons switching on
remotely controlled machines shall take adequate precautions to ensure that there is no one
checking or working on the machine. To this end, a suitable notice shall be affixed to the
start equipment.
3. Install the equipment in an area free of flammable fumes, vapours and particles, e.g. paint
solvents, that can lead to internal fire or explosion.
4. The electrical connections must correspond to the applicable codes. The equipment must be
earthed and protected against short circuits by fuses in all phases. A lockable power
isolating switch must be installed near the equipment.
5. For machines controlled by a central control system, a sign stating "This machine may start
without warning" must be affixed near the instrument panel.
Instruction book
2920 7197 51 3