QuizXpress Octobuzzy User manual
QuizXpress
Octobuzzy
Wireless
Contents of the Octobuzzy package
Item
Quantity
LED Buzzer
8
Remote control incl. 2xAAA battery
1
USB charging cable
2
Manual
1
Introduction
The QuizXpress wireless Octobuzzy is a stand-alone quiz buzzer system including 8 LED buzzers. With the help
of the remote control, the buzzers can be operated up to 10 meters away. Every buzzers has a rechargeable
Lithium battery which can be charged by using the supplied USB cables.
Step by step instruction
1) Activate the remote control by pressing the "power" button. Now press the button of each buzzer to
activate the buzzers. Each buzzer first shows the battery level of the buzzer (see the section 'Charging
buzzers' later in this document) and will then light up red.
2) Press the Start button on the remote control to activate the buzzers so that a question can be asked. The
buzzers will light up green and the green light on the remote will start flashing. The buzzer of the player
who presses the buzzer first will flash blue and play a sound. At the same time, the other buzzers will turn
red and it is no longer possible for the other players to print. On the remote control, the number of the
buzzer appears in the screen, which is pressed first.
3) Press Continue when the given answer is incorrect. The buzzer of the player who just pressed first will
now turn red and be ruled out for the rest of the question. The other players now get the chance to press.
4) Press Stop to turn off all buzzers. The buzzers turn red. Go back to step 2) to ask the next question.
5) Press and hold the Power button to turn off the remote control and the buzzer.
Charging buzzers
The buzzers can be charged using the two included USB cables. Each cable can be used for charging 4 buzzers.
The buzzer will turn red while charging. A buzzer will turn green as a sign that it is fully charged.
When the Battery button is pressed on the remote control, each buzzer will indicate by means of a color how
far the buzzer is charged:
Green
100%
Blue
75%
Yellow
50%
Purple/Red
25%
Specifications
Dimensions
Buzzer: diameter 5CM, height 3CM;
Nutrition buzzers
Rechargeable lithium battery
Power supply remote control
2 x AAA battery
Range
Up to 10 meters
-Insert battery correctly into the base station, pay attention to the (+/-) indication.
-Remove the batteries when the system is not in use for an extended period of time.
Other possibilities
Press the Mute button on the remote control to turn off the sound of the buzzers.
Troubleshooting
When a buzzer is red in color and occasionally flashes, that means the buzzer is in contact with the remote.
Make sure the remote is turned on. If this is the case, make sure the buzzer is not too far from the remote
control (less than 10 meters).
Programming buzzers
The buzzers are paired with the remote and all have a number. In principle, this does not need to be changed.
If it is necessary to replace the number of a buzzer, proceed as follows:
•Press the Mode button on the remote control
•In get screen a number will appear
•Select the number that the buzzer should get by pressing the Continue button (number up) or the
Mute button (number down).
•When the correct number is selected, press the Start button on the remote control.
•Now press the button of the buzzer that should get the new song 3 times in quick succession
•When the buzzer flashes green and the remote control displays OK in the display, the buzzer is paired
with the new number
•After programming, press the Mode button again to reset the remote control to normal mode.
Contact
www.quizxpress.com.
Table of contents
Other QuizXpress Video Gaming Accessories manuals
