Qvis G3-mini keyboard User manual

KeyboardController
UsersManual
V2.0 11.14

CATALOGUE
1.Summary---------------------------------------------------------------------------------------------------1
1.2FunctionandCharacteristic-------------------------------------------------------------------------1
1.3TechnicalData----------------------------------------------------------------------------------------1
2.KeyboardConnection------------------------------------------------------------------------------------2
2.1.1Rs422andRs485-----------------------------------------------------------------------------2
2.1.2RJ45Interface--------------------------------------------------------------------------------2
3.Keyboardoperationmanual--------------------------------------------------------------------6
3.2LCD----------------------------------6---------------------------------------------------------
3.3Joystickcontrolsdome-------------------------------6--------------------------------------------------
3.4Changeobjectdome------------------------------------7-------------------------------------------------
3.6.1Preset----------------------------7--------------------------------------------------------
3.6.3Pattern------------------------------8-----------------------------------------------------
3.6.2Scan--------------------7--------------------------------------------------------------
2.1KeyboardInterfaceInstruction--------------------------------------------------------------------2
2.4ConnectwithTheDomeDirectly-------------------------------------------------------------------4
3.5Comelens-------------------------------------7ontrold--------------------------------------------------
3.6Setdomefunction-------------------------------7------------------------------------------------------
3.7Calldomemainmenu-----------------------------------8---------------------------------------------
3.8Controlmatrix-------------------------------------8-----------------------------------------------------
3.6.4Tour------------------------------8---------------------------------------------------------
1.1Notice-------------------------------------------------------------------------------------------------1
2.3.1RJ45LocalConnection---------------------------------------------------------------------3
2.3.2RS422RemoteConnection------------------------------------------------------------------3
2.3MatrixConnection-----------------------------------------------------------------------------------3
3.1Current-carryingtokeyboard------------------------------------6-------------------------------------
3.8.1Switchdomeinorder-----------------------------8--------------------------------------------
3.8.3Confirmafterprogram------------------------------8---------------------------------------------
3.8.2Callmatrixmainmenu---------8---------------------------------------------------------------
3.8.4------------------------------8Changeobjectmonitor---------------------------------------------
4.Keyboardcontrol----------------------------------------------------------------------------------------9
4.1keyboardindexsetting-----------------------------------------------------------------------------9
4.1.1SetIDnumber--------------------------------------------------------------------------------9
4.1.2Setthebaudrate-----------------------------------------------------------------------------9
4.1.3Joystickcalibration------------------------------------------------------------------------10
4.2Domesetting----------------------------------------------------------------------------------------10
4.2.1Domepresetsetting------------------------------------------------------------------------11
4.2.3Domepatternsetting------------------------------------------------------------------------12
4.2.4Dometoursetting----------------------------------------------------------------------------12
2.5TheConnectionofTheKeyboardinTheSystem-------------------------------------------------5
4.1.5Keyboardmessagedisplay----------------------------------------------------------------10
4.2.2Domescansetting----------------------------------
-------------------------------------------11
4.3Protocolsetting-------------------------------------------------------------------------------------12
4.3.1Pelcomatrixmodel---------------------------------------------------------------------------13
4.3.2Domecontrollingmode----------------------------------------------------------------------13
4.4Exitkeyboardmenu----------------------------------------------------------------------------------13
5.Appendix--------------------------------------------------------------------------------------------------14
5.1------------------------------------------------------------------------14Rs485BusBasicKnowledge
5.2Keyboardshortcutoperationmanual--------------------------------------------------------------15
6.KeyboardMenuIndex------------------------------------------------------------------------------------16
4.1.4Multikeyboardstate------------------------------------------------------------------------10

1
1.Summary
Summary
1.1Notice
●Pleasereadthemanualcarefullyand heed
instructions contained within
●Pleasedo notplacethekeyboard in a damp
environment.
●Pleasedo not place the keyboard next to sources of
high heat.
1.2FunctionandCharacteristic
●
●
●
●
Rs485BusLine,andakeyboardcanconnectto
31 domes in thedirectcontrol mode.
.YoucancontroltheIrisLocusandZoom.
Youcansetandcallthepreset,runscanpattern
andtour.
●You cancontrol the matrix,
throughwhichwhichcan control thedome
indirectly.
●Ithasbeen
equippedwiththe2D/3Djoystickand alarge LCD
screen.
Itcanbecompatiblewithallkindsofprotocols
、
、
1.3TechnicalData
Electrical
Inputvoltage9V-12VAC/DC
Ratedpower2.5W
：
：
：
×， ×
：
、
：
（）
～
℃
：
（）
：（）
Communication
Communicationinterface
RS4851RS4221,RJ45
Communicationfrequency
2400,4800,960019200Bps
Communicationdistance
1.2kmRS485andRs422canachieveit
50
Relativehumiditylessthan90%
Physicalproperties
L*W*H=218*180*55mm
Weight630gNetWeight
Operationalenvironment
Operatingtemperature0：
℃
This keyboard can be unversally used to control PTZ
cameras within a wide variety of security control room
environments. The keyboard has been equipped with a 2D
& 3D joystick, which can control the movement of the
camera and the zoom magnification lens. It also
incorporates an LCD screen with backlight enabling you to
read the screen details in a variety of locations with
varying light levels. The screen displays the current
operation order, the control protocol's name, the current
PTZ camera's ID, the current monitor's ID, and also what
the current state the joysticks are in. Controlling the your
CCTV with the joystick will make security processes quick
and efficient.

RJ45
2
Picture2-1.1
Picture2-1.2
2.KeyboardConnection
2.1KeyboardInterfaceInstruction
There isaninterfaceonthe backofthekeyboard,
which allows you to either have a direct
connection to the PTZ cameras or a connection
via a network.
Connection
2.1.1RS422andRS485interface
Rs422andRs485interfaceareonthe6bit
ribboncableconnectionofthekeyboard.RS485
(A+B-)canconnectwiththedomewhenthekey-
boardcontrolsthedomedirectly;RS485A+B-
canconnectwithDVRorotherkeyboardswhen
thekeyboardcontrolsthedomebymatrix;Rs422
(T,T)issendingthesignal,RS422(R,R)
isreceivingthesignal,bothofwhichcanconnect
withmatrix,DVRandsoon.
（，）
＋－＋－
2.1.2RJ45Interface
6BitRibbon
Cable PowerSupply Port
This is the standard network interface, which is mainly
used for connecting the keyboard with the control matrix
over short distances (less than 7.6m). For more details
please see "2.3 matrix connection".

3
ALARMS
(1-9)
ALARMS
(1-18)
COM1(1-6)
COM2(7-12)
CONTROL
OUTPUTS
RJ45
RJ45
A+B-T+T-R+R-
RS422RS485 T
+
T
-
R
-
R
+
RemoteKeybard(S)
Pin1
Pin8
T+R+
T-R-
R+T+
R-T-
LocalKeyboard
PleaseinsertoneendofRJ45connection
lineintotheRj45interfaceofthekeyboard,and
inserttheotheroneintothe RJ45interface
(“ LOCALKEYBOARD ”） ofCM6700matrix
2.2MatrixConnection
2.2.1RJ45LocalConnection
Rs422connectionline,oneendconnectswith
Rs422interfaceREMOTEKEYBOARD(s))of
CM6700backplate,theotherend connectswith
Rs422interface of thekeyboard,thekeyboardint-
erfaceRs422R+R-correspondswithmatrixin-
erfaceRs422T+T-,thekeyboardinterfaceRs
422T+T-correspondswithmatrixinterfaceRs
422R+R-.
（
（）
（）
（）
（）
2.2.2Rs422remoteconnection
1RJ45localconnection,thedistancebetween
thekeyboardandthematrixislessthan7.6m.
2、RJ45interfacehas12VAC, no other power
is needed when the keyboard connects to the
CM6700 matrix.
、
NOTICE
NOTICE
Rs422remoteconnection,themaximum
distancebetweenthekeyboardandthe
matrixis1200m.
Pin1
2
3
4
T+
T-
Pin5
6
7
8
NC
NC
R-
R+
RJ-45Limb
Powerinput
AC/DC9V-12V
CM6700Matrix
Keyboard2
Keyboard1
Picture2-2.1
Keyboard Matrix
9V-12VAC/DC
NONPOLAR
Connection
The keyboard can control the PELCO protocols
CM6700 & CM6800. For example the keyboard
connects with the PELCO CM6700 matrix in order to
introduce the connection between the keyboard and
the matrix.
There are two kinds of keyboard connection
interface on the CM6700 matrix back plate. One is
the local keyboard connection interface RJ45
("LOCAL KEYBOARD"), which can control the single
keyboard within the distance of 7.6m. The other is
the remote interface RS422 ("REMOTE
KEYBOARD(s)"), which can connect with the
keyboard's RS422 Iinterface. The maximum distance
is 1200m.

A+B-T+T-R+R-
RS422
RS485
A+B-
RS485
AC24V
4
2.3ConnectwithTheDomeDirectly
Dome
Keyboard
PowerAC/DC9V-12V
Picture2-3.1
Connection
You can connect to the PTZ camera/dome via the RS485
interface on the keyboard if you want to control it directly.
The RS485 interface of the PTZ camera/dome is on the
switchboard of the pendant hanger found on the upper
cover of the PTZ camera/dome. You will also find the 4
Pin control/power socket and also the RS485 A+ & B-
when you turn the metal button inside the hanger and
opened the switchboard.
There are different ways to connect to the PTZ camera/
domes depending on the make of them. Please see the
PTZ camera/dome's user manual for more information.

5
2.4TheConnectionofTheKeyboardin
TheSystem
Thekeyboardcontrolsthematrixandthencontrol
thedomesindirectlybythematrixseestothepicture
2.4-1Whenunconnectwiththematrix,thekeyboard
controlsthedomedirectly.
（
）
Keyboard Picture2.4-1 Dome1 Dome2
Picture2.4-2
Keyboard1
Keyboard3
Keyboard4
Keyboard2
Dome1 Dome2 Dome3 Dome4
Dome5 Dome6 Dome7 Dome8
Matrix
NOTICE
1.AlineofRs485maycontrolupto32main
controllingandundercontrollingequipments,
soakeyboardwhichcontrolsthedomedirectly
mayconnectupto31domes.
2.Thesystemmayconnectupto4keyboardsat
thesametime,andthefourkeyboardsIDare
different.
Connection
The keyboard and camera connects in parallel with the
RS485 Bus and each keyboard can control each dome. This
way is required because you need to have the keyboard's
(the main keyboard ID is set to '1') Baud rate set to 9600bps
(see picture 2-4-2).

6
CamID:001MonID:001
Protocol:Factory
Baudrate:9600bps
3.KeyboardOperationManual
LensControlling
LCD
Function
Numericzone
Joystick
3.1Electrifytokeyboard
NOTICE
1.whenthekeyboardisinitializing,thejoystick
musttoreturn0,cannottopullorrotatethe
joystick.
3.2LCD
Picture3-1.2
Picture3-1.1
Connection
This section of the manual explains how to operate the
actual keyboard. It needs to be noted that the
systematic platform of the keyboard compared to the
PTZ camera/dome may differ. Please refer to the PTZ
camera/dome's users guide to make sure that both
devices work together successfully.
The LCD display is used to list the keyboard's basic
operational information, which includes camera control,
monitor ID, baud rate, etc. In the last line it shows the
keyboard input commands and joystick operation. As the
image in Picture 3-1-1 shows, when you operate the
keyboard the LCD's backlight will turn on so you are able to
view the screen's information more clearly. The backlight
will switch off after 15 seconds of non use.
When power is provided to the keyboard, the keyboard
will auto-test the baud rate, protocol and the PTZ
cameras/domes (object monitor will be set as '1'). This
information will show on the LCD screen.

7
3Joystickcontrols the dome
●
●
3.Focuscontrol：
PressFARmanuallyfarfocus,tomakethe
farobjectmorelegible,leavetostop.
PressNEARmanuallynearfocus,tomake
thenearobjectmorelegible,leavetostop.
【】
●
【】
3.4Changeobjectdome
【】【】
【】，
，【】
N+Cam
Nmeansnumerickey
InputthedomeIDPressCam to changeobject
dome.
3.5Domelenscontrol
3.6.1Preset
SetpresetSET+N+Preset
CallpresetN+Preset
Nmeanspresetnumber.
：【】
：
●
●
【】【】
【】【】
【】
●Iriscontrol：
【】
【】
PressOPENmanualIrisincrease,Irisis
at the maximum,the screen will show white,leave
tostop.
PressCLOSEmanualIrisreduction,Irisis
at the minimum,thescreen willshowblack,leaveto
stop.
3.6Domefunctionoperation
3.6.3Pattern
Setpatternpath
Runpattern
：【】【】【】
【】【】【】
【】（）
【】
【】【】【
】
：【】【】
（）【】
SET+N+PATTERN
+Path+SET+0+PATTERN
PressSET,inputpatternNO.1-4,
PressPATTERNtoentertoursetup,the
dome recordsa seriesofmotions, whencomplete
pressSET,thenpress0,thenpressPAT-
TERN,thepatternsetupfinish.
N+PATTERNInputpattern
number1-4,pressPATTERN,runpattern.
●
●
●
【
【
Press TELE】
PressWIDE】
Zoomcontrol：
3.6.2Scan
Setleftlimit++
Setrightlimit+2+Scan
+Scan
Usershouldenterintomenusetuptochange
the speedofscan.
：【】【】【】
：【】【】【】
：【】【】
●
●
●
SET1Scan
SET
Runscan1
Connection
The Joystick has two functions, one is to manually
control the PTZ camera/dome's rotation, and the other
is to help control the set up of the object menu.
Rotate the joystick in any direction, the camera will
rotate in correspondence with the direction of the
joystick at the same time. The LCD will display the
information in the lower right corner as directional
arrows. They respectively show tilt up, tilt down, tilt right,
tilt left. If the joystick tilts to the upper right hand corner,
the image will display the relevant directional arrows.
When the joystick returns to the primary location, the
camera will stop rotating.
●
You can tilt the joystick up or down to scroll through
the system menu options. When you tilt it to the right
you will select that menu option or reserve the setting
after it has been set. Tilting it left will exit menu or stop
reserving the settings.
By moving the joystick more quickly the more the PTZ
camera/dome pan/tilts in parallel with the speed of
movement.
, the camera's lens will zoom in
to increase the image size by multiple amounts.
, the camera's lens will zoom
out to decrease the image size by multiple
amounts.
The standard setting for the camera is for it to be in
constant auto focus. The user must manually focus
and run other operations by the two keys, once this is
done the camera will automatically resume to auto
focus.

3.6.4Tour
RuntourN+TOUR/TOUR
PresstournumberpressTOURruntour.
Ifsystemhasonlyatour,pressTOURdirectly.
A settourmust be entered into the
setupmenu.
：【】【】【】
，【】，
【】
3.8.2Callmainmenuofmatrix
3.8.3Confirmafterprogram
ENTERafterthematrixprogrammed,
pressENTER,meansconfirmafterprogram,
foradetailed explanation,please
refertothematrix operation manual.
【】：
【】
3.7Callthedomemainmenu
9+5+Presetinput95,thenpress
Presettocallthemain menu ofobjectdome.
The menu isdisplayedintheobjectmonitor.
How to setthedomemenubykeyboard,
PleaserefertothedomeOperationmanual.
【】【】【】：
【】
3.8Controlthematrix
3.8.1Switchthedomesinorder
Thematrixconnectssixteendomes,andswitches
thedometopreviousandthenext dome.TheLCD
willdisplaynumber,dateand time.
PREV:switchtopreviousdome.Press
PressPREVtoholditfor2s,andjumpsixteen
domesoftheconnectionmatrixinpreviousorder.
PressStoptostoptoswitch.
NEXT:switchtonextdome.PressNEXT
toswitchthenextdomeinsinglestep;pressNEXT
toholditfor2s,andjumpthesixteendomesofthe
connectionmatrix.
Stop:switchcontinuously,pressStopto
stoptoswitch.
【】
【】
PREV,switchtopreviousdome in asinglestep；
【】
【】
【】【】
【】
【】【】
3.8.4Changeobjectmonitor
N+MON
InputthemonitorID,then pressM【ON】，the
imageandthemenuofthe dome thatyou control
bykeyboard willdisplayinthe objectmonitor.
【】【】
8
Connection
Calls the main menu. The
main menu will be displayed in the object monitor. If
you are unsure how to change settings in the matrix
menu please refer to the matrix's operation manual.
【Shift】+【Set】：