R/Evolution 5730 User guide

1 2
3
5
4
6
SHIPMENT CONTENTS (Kits Shipped Separately)
INSTALLATION
Micro-DB9
Serial Cable
Controller Enclosure
2 Power Cords
1 SAS Cable
per I/O Module
Expansion
Enclosure
Getting Started Guide
Rackmount Kit
(Optional)
Controller Kit
Documentation
Rackmount Kit Installation Rack Installation
Expansion Kit
Controller Enclosure:
66 lb (30 kg)
Expansion Enclosure:
63 lb (28.6 kg)
2 Power Cords
This Poster
For step-by-step installation instructions,
refer to Chapter 2 of the Getting Started Guide.
Download the R/Evolution documentation set from:
http://crc.dothill.com

Service
CLI
ACTIVITY
DIRTY
CLEAN
CACHE 10/100 BASE-T STAT US STAT US
Service
CLI
ACTIVITY
DIRTY
CLEAN
CACHE 10/100 BASE-T STAT US STAT US
Service
CLI
ACTIVITY
DIRTY
CLEAN
CACHE 10/100 BASE-T STATUS STATUS
Service
CLI
ACTIVITY
DIRTY
CLEAN
CACHE 10/100 BASE-T STATUS STATUS
Service
CLI
ACTIVIT Y
DIRTY
CLEAN
CACHE 10/100 BASE-T STATUS STATUS
Service
CLI
ACTIVIT Y
DIRTY
CLEAN
CACHE 10/100 BASE-T STATUS STATUS
Service
STATUSSTATUS
Service
STATUSSTATUS
Copyright Protected Material 2006-2009. All rights reserved. R/Evolution and the R/Evolution logo are trademarks of Dot Hill
Systems Corp. All other trademarks and registered trademarks are proprietary to their respective owners.The material in this
document is for information only and is subject to change without notice.While reasonable efforts have been made in the
preparation of this document to assure its accuracy, changes in the product design can be made without reservation and without
notification to its users.
7
CABLING AND INITIAL CONFIGURATION
Host Ports Ethernet Management Port
Service (MUI) Port
Power Switch Power Switch
CLI Port Expansion Port
Data Hosts
Controller Enclosure Ports
8 10
Expansion Enclosure Connection Initial Configuration
9Data Host FC Connection
Part Number 83-00005011-11 Rev. A
January 2009
Chapter 3 and 4 of the
R/Evolution 5730 Getting Started Guide
Cable Ethernet connection to management hosts
Set controller management port IP addresses
Configure your web browser
Log in
Set the date and time
Configure controller enclosure host ports
Save the configuration
Create virtual disks
Map volumes
Test the configuration