R/Evolution Galaxy 70/70 User manual

1
Content
I. Reference..............................................................4
1.1 General Features...................................................4
1.2 Accessories.............................................................4
2.2 Rear Panel..............................................................5
2.3 Remote Control Unit (RCU)................................. 6
III. STB....................................................................... 7
Ⅳ. Installation......................................................... 7
4.1 Antenna Setting......................................................7
4.2 USALS Setup......................................................... 8
4.3 Factory Default.......................................................8
V. Edit Channels.....................................................9
5.1 Edit Channels......................................................... 9
5.2 Edit Favorites....................................................... 10
5.3 Sort Channels.......................................................10
5.4 Delete Satellite Channels...................................10
5.6 User channel list.................................................. 12
VI.System Setting................................................ 13
6.1 System.................................................................. 13
6.2 OSD....................................................................... 14
6.3 Parental control....................................................15

2
6.4 Timer Adjust....................................................... 16
6.4.1. Time Setup............................................. 16
6.4.2 Event Timer..............................................17
6.4.3 Sleep Timer..............................................17
6.5 About STB........................................................... 18
VII.USB Control.....................................................18
7.1 USB Menu......................................................... 18
7.2 USB Manage........................................................ 19
VIII.Network Setting.............................................20
8.1 Network Setting................................................... 20
8.1.1 IP Setting.................................................... 21
8.1.2 SMB Menu.................................................. 21
8.1.3 3G Setup.....................................................21
8.2 Network Application...................................... 22
IX. Basic Operation..............................................
9.1 RECALL................................................................
9.2 SAT........................................................................
9.3 EPG.......................................................................
9.4 FAV........................................................................ 23
9.5 Audio......................................................................23
9.6 Zoom..................................................................... 23
22
22
22
22

3
9.7 INFO...................................................................... 23
9.8 Subtitle.................................................................. 23
9.9 Teletext..................................................................
9.10 MULTIPIC...........................................................
9.11 Recording........................................................... 24
9.12 Timeshift............................................................. 24
23
23

4
I. Reference
1.1 General Features
DVB-S/DVB-S2 Satellite Compliant (MPEG-II/ MPEG-IV/ H.264)
SCPC & MCPC receivable from Ku and C band satellites
Universal, Single, Single S & C Band Wideband LNB
Sensitive Tuner with Loop-Through
DiSEqC1.0/1.1/1.2/1.3 (USALS)
Blind search supported
Auto DiSEqC Search
PAL/NTSC Conversion
True full Color (32 bits) on screen display (OSD)
8 favorite group and parental lock supported
Multi-language menu supported
Multi-language audio supported
Multi-language DVB Subtitle output
7 days Electronic Program Guide (EPG)
Teletext output through VBI and OSD
Multi-Picture supported
1.2 Accessories
Users manual
Remote Control Unit
Batteries
HDMI Cable

5
II. Product Overview
2.1 Front Panel
1. POWER Switch between operation and standby modes.
2. POWER LED Power Indicator.
3. SIGNAL LED Signal Indicator.
4. DISPLAY It displays channel number. In standby mode it displays local time.
2.2 Rear Panel
1.TUNER Connect the satellite antenna cable.
2.USB2.0 Two USB2.0 host port
2.LAN
3.DV-OUT Connect to the TV using an HDMI cable.
4.AUDIO/ VIDEO Connect to the TV using an RCA cable.
5.COAXIAL Digital Audio output.
6. RS232 Connect to the computer using serial line.
7.LAN The port of ethernet
8.ON/OFF Power on/off.
2.3 Remote Control Unit (RCU)
1. POWER: Switch between operation and standby modes.
2. MUTE: Mute audio.
3. AUDIO: Display the audio list.

6
4. PAUSE: Freeze the picture.
5. ZOOM: Picture zooming function.
6. INFO : Display the programme information.
7.:Back Backward .
8. :Fast Forward.
9. I I: Play/Pause/time shift.
10. ■/USB: Stop the Music or Movie and Enter USB
menu.
11. I:Previous.
12. I: Next.
13.●:Record.
14. A-B:Jump bookmark
115. Recall: Show the previous viewed channels list.
Or switch to theprevious viewed channel.
16. TEXT: Display the teletext.A-B
17. SUBTITLE: Display the subtitle language list.
18. USB:Enter storage device
19. MENU: Activate main menu or exit to live channel.
20. EXIT: Exit current menu step by step.
21. OK: Confirm the selected operation or display the
channel list while watching a prog-ramme.
22. LEFT/RIGHT VOL+/- : Change volume in viewing mode.
23. EPG: Electronic Program Guide
24. FAV: Display favorite channel list you set before.
25. Find: Search you want to show
26. SAT: Show the scanned satellite list
27. F1: Accessorial function.
28. F2: Accessorial function.
29. Page+/-: Change program list from one page to another page.
30. NUMERIC KEY (0~9): Enter a TV/radio channel number,
31. MULTIPIC: Multi picture display
32. TV/R: Switch between TV and RADIO.

7
III. STB
You should installation the receiver when powering on your product for the first
time after purchase.
Note: The default password is 0000.
Main menu
Press the MENU button to enter the main menu.
Ⅳ. Installation
Press the OK button to enter into the installation menu.
4.1 Antenna Setting
Antenna Setting allows you to configure the antenna setting parameters.
1. Satellite: Select the satellite which you want to setup.
2. Transponder: press OK button into TP list then press CH+/CH- button to

8
change the TP, then press CH+/CH- button to Add/Delete/Edit TP.
3. Motor Mode: Press the VOL+/VOL- button to select motor mode(DiSEqC
1.2 or USALS) input.
4. LNB Freq: Press the VOL+/- button to change the LNB frequency.
5. DiSEqC Type: It used to set DiSEqC1.0 port ,press the VOL+/VOL- button
to select the required .
6. DiSEqC 1.1: Press the VOL+/VOL- button to select the required
DiSEqC1.1 input.
7. Network search:Press VOL+/VOL- button to select the Network search
Yes/No.
8. 22KHz: It used to control the 22 KHz switch
9. LNB Power: Select the required LNB power.
4.2 USALS Setup
If you set the Motor Mode to USALS, you need set the longitude and the
latitude in USALS Setup.
Setup by Country: Press the RED button, you can choose the country, press
OK button to select.
4.3 Factory Default
You can restore the product to the factory default and you can also setup it
according to the wizard.
Note: Please note that once you perform All, all data and settings will be

9
Highlight the option you want and press the OK button to execute it.
1. All: All data and settings will be deleted.
2. Channels List only: All channels data will be deleted.
3. Radio Channel only: All radio channels data will be deleted.
4. Scramble Channels only : All scramble channels data will be deleted.
V. Edit Channels
5.1 Edit Channels
Menu-> Edit Channel ->Edit Channels
Edit Channels enables you to delete, rename, move lock/unlock or hide the
channels in the channel list.

10
1. Delete Channels: Press the RED button, and press the EXIT button, here,
select Yes will delete the chosen channels.
2. Move Channels: Press the BLUE button, and press the OK button to
select the channel. Press the CH+/- button or press the NUMERIC(0-9) buttons
to the destination in the channel list and press the OK button. Move Group
Channels：Press the BLUE button two times to sign the channel, and press the
CH+/- to highlight the second channel you want to group move. Press the
BLUE button to sign the channel. Press the CH+/- button to the destination in
the channel list and press the OK button.
3. Lock and Unlock Channels: Press the GREEN button input the password
to lock the channel.
Note: If the highlighted channel is locked, press the GREEN button is
switched into Unlock.
4. Rename Channels: Press the YELLOW button to enter a channel name
directly using the keyboard displayed on the screen. Press the RED button to
complete.
5.2 Edit Favorites
Press the colorful button to add the Favorite channel you want to set up ,then
press the Vol+/Vol- button can change the types

11
5.3 Sort Channels
You can sort the channels list.
5.4 Delete Satellite Channels
Menu->Channel Manager->Delete Satellite Channels

12
5.6 User channel list
You can save or load the channel list you want.
VI.System Setting
In this menu you can make some system settings

13
6.1 System
Menu-> System Setting-> System
1. Menu Language: Set the menu language.
2. Audio1: Set the preferred audio language.
3. Audio2: Set the sub-prime audio language.
4.EPG Language：Set the preferred EPG language.
5.Auto Chanel Selection ：If you set ON, in the channel list will play
automatically when you highlight the channel. If you set OFF, in the channel list
when you highlight the channel, you should press the OK button to play it.
6. Recall List: You can turn Recall List on or off. If you set ON, when you
press Recall button of RCU you can get the recall list. If you set OFF, when you
press recall button you can go back to the last program you have selected.
7.Volume Per Channel: If you set ON, you can set different volume for each
channel. If you set OFF, all channels can only have one volume.
8.Audio Type: If a channel has AC3 and PCM audio language at the same
time, when you select AC3 it will set AC3 audio language as default output and
when you select PCM it will set PCM audio language as default output.
9.Auto Subtitle:If you set ON ,the channel can auto display the subtitle
language ,if you set OFF,the channel display the subtitle language manually.

14
6.2 OSD
1. OSD Transparency: Set the transparency of all menus.
2. TXT Transparency: Set the transparency of teletext.
3. Time Out: Set the display time of the programme information.
4. TV System: Set the TV system mode.
5. HDMI Mode: Set the HDMI output mode.
6. TV Screen Format: Set the display format according to the screen ratio.
7. HDMI Audio Mode：Set the HDMI output mode.
8. AC3 Bypass: If you select OFF,PCM can be selected and if you select
ON,Digital can be selected
9. Signal Audio Tone: If you set on,in the satellite and press F1 button signal
menu it will make a sound.

15
6.3 Parental control
Parental Control allows you to set limits for each programme or change
your previous password.

16
6.4 Timer Adjust
6.4.1. Time Setup
Menu->System Setting->Timer Adjust->Timer Setup
You can setup the system time.
Note: The time you set will be shown on the front panel when you set receiver
to standby mode.
6.4.2 Event Timer
Go to Menu->System Setting->Timer Adjust->Event Timer.
It will record or play the programme automatically according to the timer
event list that you set.

17
Press the GREEN button to setup a timer, press the RED button will delete this
timer and press the YELLOW button can go to edit this timer.
Source: Switch TV and radio.
Channel: Press the VOL+/- button to display the channel list and press the
OK button to select the channel.
Date: Input the date of the timer.
Start: Input the start time of the timer.
Stop: Input the stop time of the timer.
Repeat: Select the repeat times of the timer. (one time/every day/one
week/from Monday to Friday/from Saturday to Sunday)
Record: To set if you want to record the timer.
STB Off: Set ON, the receiver will go to standby mode after the timer, set
OFF it won’t be standby.
6.4.3 Sleep Timer
SLEEP Timer can set the automatic turn off time.
1. Go to Menu->System Setting->Timer Adjust->Sleep Timer or press the
SLEEP button directly.
2. Press the VOL+/- button to select the option or input the number at “--
Min” option.
3. Press the OK button to save.

18
6.5 About STB
In this menu, you can get the information about the STB, such as Model ID,
Hardware Version, Software version and so on. When you need service from
the dealer you need to submit this information in order to get the correct and
fast after sales service.
VII.USB Control
7.1 USB Menu
Menu->USB Control-> USB Menu or press the USB button directly
USB Menu can play many kinds of media files.

19
1. Press the VOL+/- to select the file type.
2. Press the CH+/- to change the folder or file and press the OK button to
open the folder or play the file.Press the colourful button to do some other
operations.
3. USB menu support play Movie/Music/Picture/Software and so on.
7.2 USB Manage
Menu->USB Control-> USB Manager
USB manager can Rename/Delete/Create Folders,and Format Disk.
VIII.Network Setting
Int this menu,you can connect LAN/WIFI/3G to be online.

20
8.1 Network Setting
8.1.1 IP Setting
In this menu,you can see the LAN IP Situation, and connect WIFI hotpoint