RACING COCKPITS RCP OSW User manual

RCP OSW/VRS/SIMUCUBE Front Mount
Manual (v.08/2021.1)
If you need any assistance building, please let us know. We are here to help!
T[email protected] +1(833)RACING2
©2021 Racing Cockpits Operating Company, LLC

Step 1: Install Side Mount Profiles
Profile:
● 2 x 7” 2-Slot Profile (or 5.5” for Sport Model)
Hardware:
● 2 x 4-Hole 90° Corner Brackets
● 8 x 16mm Standard Bolts
● 8 x Standard Spring T-Nuts
Mount at the desired height & measure both sides to ensure they are level with each
other!
Page 2
RCP OSW/VRS/SIMUCUBE Front Mount Manual (v.08/2021.1)

Step 2: Install OSW/VRS/SIMUCUBE Front Mount
Hardware:
● 1 x OSW/VRS/SIMUCUBE Front Mount
● 8 x 16mm Standard Bolts
● 8 x Standard Spring T-Nuts
Attach OSW/VRS/SIMUCUBE Front Mount, ensure it’s centered, then tighten everything
well
Page 3
RCP OSW/VRS/SIMUCUBE Front Mount Manual (v.08/2021.1)

Step 3: Install Wheel Base
Install your wheelbase of choice using the bolts included with your wheel base.
Page 4
RCP OSW/VRS/SIMUCUBE Front Mount Manual (v.08/2021.1)

Step 4: Race, Adjust & Tighten!
Congratulations!!!
You are now ready to race.
Our Cockpits are designed to be completely customizable, so feel free to adjust
everything to suit your needs and preferences.
After a few days of use, go back around and tighten up all screws to keep everything nice
and rigid after it settles in.
If you need anything, please let us know. We are here to help!
Fast Email Support: T[email protected]
Fast Phone Support: +1(833)RACING2
Page 5
RCP OSW/VRS/SIMUCUBE Front Mount Manual (v.08/2021.1)