Rack Solutions 2UKVM-125-USB-4-17V User manual

RackSolutions.com
[e-mail] Technical Support & Sales 903.453.0801
Rack Mount Monitor Tray
with Keyboard
with Dell 17" LCD (17V)
Installation Instructions
Kit P/N: 2UKVM-125-USB-4-17V
Kit P/N: 2UKVM-125-PS2-4-17V
Patent(s) Pending

Page 2
Kit Contents
(1) Partially Assembled Shelf w/Door
(2) Rear Brackets
(1) Cable Management Bracket
(1) Dell 17" LCD (Shipped Separately)
Rear Hardware Bag:
(4) 8-32 x 3/8" Pan Head Screws
(4) 8-32 Nuts
Rack Mount Hardware x8 Bag:
(8) 12-24 x 1/2” Pan Head Screws Zinc
(8) 10-32 x 1/2” Pan Head Screws
(8) 12-24 Cage Nuts
(8) 12-24 Square Nuts
17V Monitor Hardware Bag:
(4) 1/4" White Nylon Spacers
(4) Pan Head Screws M4x18mm
Installation Instructions (4 Post)
Step 1. Mounting Depth: Measure the “Mounting-Depth” for your rack from the front of
the “Front-Mounting-Surface” to the back of the “Back-Mounting-Surface”.
4Post Cabinet Double 2Post
FRONT
REAR
MOUNTING DEPTH
FRONT
REAR
MOUNTING DEPTH
Step 2. 23.5” to 31.5”: The Rear Rack Brackets will be installed as shown below for this
“Mounting Depth” range (See Step 4 for assembly).
Step 3. 15.5” to 23.5: The Rear Rack Brackets will be installed as shown below for this
“Mounting Depth” range (See Step 4 for assembly).
"Mounting Depth" 23.5" - 31.5"
"Mounting Depth" 15.5" - 23.5" Reversed Rear
Rack Bracket

Installation Instructions
Page 3
Step 4. Rear Bracket Attachment: Move the slide rails back approximately 10 inches. You
may need to loosen the thumb screws to do this.
Attach the Rear Rack Brackets and the Cable Arm Extension as shown below.
Attach using (4) 8-32 x 3/8” Pan Head Screws and (4) 8-32 Nuts. The screws
should be located in the slots as far apart from one another as possible (see
below). Tighten all screws.
(2) Rear Brackets
(4) 8-32 Nuts
(4) Screws 8-32 x 3/8 (gold)
(1) Cable Management Bracket
Slide the Outer Rails back ~ 10"

Step 5. Monitor Attachment: Turn the monitor face down on a large flat surface. Locate
the four VESA mounting holes on the rear of the monitor. Attach the monitor to
the pivot using the hardware shown. The preferred hole locations are marked on
the pivot.
(4) 18mm Screws
1/4" Spacers
Monitor
(upside-down)
VESA Hole Pattern
Recess
Bottom of Monitor
Warranty Statement
Innovation First, Inc. warrants our products against defects in material and workmanship for a
period of one (1) year from the date of purchase. Innovation First, Inc. liability shall be limited to
repairing or replacing, at our option, any defective product.
Installation Instructions
Step 6. Attach to Rack: Install the shelf using hardware from the Hardware Mounting
Kit (included). Hardware is included for all four rack hole types: threaded 12-24
holes, and threaded 10-32 holes, square holes, round holes.
Threaded 12-24 racks use the 12-24 screws.
Threaded 10-32 racks use the 10-32 screws.
Round hole racks use the 12-24 screws and 12-24 square nuts.
Square hole racks use the black 12-24 cage nuts and 12-24 screws.
A