RACOR PG-2R User manual

HOME STORAGE PRODUCTS
WARNING
Please read installation instructions carefully prior to installing. Before
using the product thoroughly test the fully-weighted product (with equip-
ment in place) to ensure the product has been installed properly. Do not
allow children to play on product. ITW Brands is not responsible for any
damage resulting from improper installation, overloading or product
failure.
GOLF STORAGE HANGER | PG-2R
INSTRUCTIONS
Phillips driver
1/8” Drill bit
Drill
TOOLS REQUIRED PARTS LIST
MARK
1
x1 Golf rack
x2 2’’ (5 cm) wood screws
Mark holes through level rack mounting plates,
drill 1/8” pilot holes and install screws into
stud. Tighten screws firmly.

A
B
C
USING THE GOLF RACK
Hang golf bags on either side and
place shoes on center hooks as shown.
SHOE PLACEMENT
2 pairs of shoes may be placed on the rack by
sliding them onto the wire loops either upside
down or rightside up.
BAG PLACEMENT
Golf bags are stored on the rack by hanging
either carrying handles or shoulder straps over
side hooks.