Radenso DS1 User manual

DS1 USER MANUAL

TABLE OF CONTENTS
Features 3-4
Preamble Display 5
Button Operation 5
Mute On/Off, Auto Demute 5
Button Operation in Menu Mode 6
Factory Reset 6
Menu Settings 7-10
Speed Unit 10
Unit of Measure for Quiet Ride & Speed Limit 11
Idle Display 12
Sub Display 12
Alerts 12-13
Lowspeed Mute 14
RLC Auto Mute 14
Lockouts 14-15
User Point Alarm 15
POI Point Delete (Speed & Red light Camera) 16
Auto Lockout 16-17
K Lockout 24.199 17
City Mode 17
Bluetooth 17
K Narrow / Wide 17
Ka Narrow / Wide / Segmentation 17-18
Threat Display 18
Bogey Tone 18
Auto Mute Mode 18-19
Auto Dim Mode 19
Auto Power Mode 19
Power Cord Alert LED 19-20
Power Cord Mute Button 20
Software Update 20
FCC Statement 21-22
Support 23

PAGE 3
1. GPS
2. DB POI (Red Light, Speed
Camera, Red & Speed Camera)
Delete
3. User Point Save/
Delete (Max 5,000 points)
4. User Point Alarm
5. Lockout Save/Delete
(Max 5,000 points)
6. Voice/Beep Alarm On/
Off the locked out
frequency
7. Auto Lockout Save/
Delete (Max 12,000 points)
8. K Lockout 24.199
function
9. POI DB Save/Update
(Max 20,000 points)
10. POI Alarm
11. POI Limit Speed Alarm
12. X, K, Ka Band, MRCD,
POP (K, Ka), Laser
Detection
13. Display: 182 * 64
OLED Display
14. 5 Button: [VOL-],
[VOL+], [MUTE],
[POWER], [MENU]
15. Mode: AUTO ->
CUSTOM
16. Voice On/Off
17. Freq Display On/Off
18. Low Speed Mute
(Off, 5-45mph/5mph step,
10-70kph/10kmph step)
19. Over Speed Warning
(Off, 65-105mph/5mph step,
100-170kmph/10kmph step)
20. BT On/Off
21. Laser On/Off
22. Ka On/Off
23. MRCD On/Off
24. K On/Off
25. X On/Off
26. POP Ka On/Off
27. POP K On/Off
28. X, K, Ka Radar
Sensitivity (100%, 90%,
80%, 70%, 60%, 50%)
29. Ka Narrow (Wide, Narrow,
Segment)
30. K Narrow (Wide, Narrow, NZ
K Narrow (AUS/NZ))
31. Ka Segment (1-9)
32. Ka Filter On/Off
33. K Filter On/Off
34. TSA Filter On/Off
35. Display Brightness
(Auto, Bright, Dim, Dimmer)
36. Display Color (Red, Blue,
White, Gray, Pink, Purple, Green,
Amber)
37. Laser Color (Red, Blue,
White, Gray, Pink, Purple, Green,
Amber)
38. Ka Color (Red, Blue, White,
Gray, Pink, Purple, Green, Amber)
39. MRCD Color (Red, Blue,
White, Gray, Pink, Purple, Green,
Amber)
FEATURES

PAGE 4
40. K Color (Red, Blue, White,
Gray, Pink, Purple, Green, Amber)
41. X Color ((Red, Blue, White,
Gray, Pink, Purple, Green, Amber)
42. Idle Mode (Time, Scan,
Smart Dark, Dark)
43. Sub Mode (Speed,
Compass, Speed and Compass,
Altitude, Off)
44. Laser, Ka, MRCD, K, X
Tone (1, 2, 3, 4, 5, 6, 7, 8, 9, 10)
45. GPS On/Off
46. GPS Signal Announce
On/Off
47. Auto Lockout On/Off
48. Auto Lockout area
49. Pin Home Set
50. Red Light Camera On/
Off
51. Speed Camera On/Off
52. Red&Speed Camera
On/Off
53. GPS Alert Distance
(Auto, Short, Medium, Long)
54. Red Light Camera
Auto Mute (Off,
55-70mph/5mph step,
90-110kmph/10kmph step )
55. All User Point Delete
56. All Lockout Delete
57. All Auto Lockout
Delete
58. Region (US, CANADA, AUS/
NZ)
59. GMT (-12 - 12hr/1hr step)
60. DST On/Off
61. Time (12hr/24hr)
62. Unit (English, Metric)
63. Auto Power Off (Off, 15
min, 30 min)
64. Auto Mute On/Off
65. Auto Mute Start (1 sec, 2
sec, 3 sec)
66. Auto Mute Volume
(50%, 40%, 30%, 20%, 10%, 0%)
67. Factory Reset
68. FW Version
69. DB Version
70. Mute On/Off
71. Volume level (0-9 Level)
72. Power On/Off
73. User setting save
74. FW Update (PC, BT)
75. DB Update
76. BT Pairing Mode
77. Bogey tone (X, K, Ka Band)

PAGE 5
Preamble Display
During a Preamble, the display shows Radesndo DS1
logo with Bright mode.
Button Operation
Power Press Power on/off
Vol + Press Volume Level Up (Display & 1 Beep):
0-9 Level
Vol - Press Volume Level Down (Display & 1
Beep): 9-0 Level
Menu Press Menu Mode
Mute
Press Toggle Mute Off/On (Display Only)
Lockout save/delete
1 sec Press Red / Speed/ Red & Speed
Camera Delete (During Alert)
2 sec Press User Point save and delete (While
not Alerting)
Mute On/Off, Auto Demute
1. Mute On can be activated by pressing Mute button
when unit is detecting (alerting) Laser or Radar
signals. Laser/Radar/Over speed alert (Voice and
Beep) are muted.
2. Press Mute button again to turn off Mute mode.
3. Unit turns back into Mute Off from Mute On
automatically 20sec after the radar/laser alarm
ends.
4. Unit turns back into Mute Off from Mute On if the
Laser/Radar band changes.
5. Unit turns back into Mute off from Mute On if the
Menu mode is selected

PAGE 6
Button Operation in Menu Mode
1. Main Menu
[VOL+]: Move to the right from the left in Main
Menu
[VOL-]: Move to the left from the right in Main Menu
[MENU]: Select an option to enter the Sub Menu.
2. Sub Menu:
[VOL+]: Step down on the Sub Menu .
[VOL-]: Step up on the Sub Menu
[MENU]: Select an option to enter the Option Menu
3. Option Menu:
[VOL+]: Step down on the Option Menu
[VOL-]: Step up on the Option Menu.
[MENU]: Select an option
4. [MENU] Long press: Go back to the upper Menu.
Go back to the Standby mode when you are in the
Main menu.
5. Automatically exit the Menu If there is no button
operation in the Menu mode for 10 seconds.
Factory Reset
Select Factory Reset in the Menu to reset all the
settings except GMT and Region settings. GMT and
Region settings will stay the same even after Factory
Reset.

PAGE 7
MENU SETTINGS
Menu Submenu
Mode
Laser
K
BT (Bluetooth)
Voice
Ka
Ka
K
X
MRCD
POP Ka
POP K
Option Menu
Auto, Custom
On, Off
On, Off
On, Off
On, Off
On, Off
Wide, Narrow, Segment
Default: US, AUS, NZ: off; Canada: on
Default: off
Wide, Narrow, NA K Narrow (AUS/NZ)
On, Off
On, Off
On, Off
On, Off
User
Preference
Band On/Off
Band Setting
Frequency
Display
Ka Radar
Sensitivity
K Radar
Sensitivity
X Radar
Sensitivity
Low Speed
Mute
Overspeed
Warning
BT Pairing
On, Off
100%, 90%, 80%, 70%, 60%, 50%
100%, 90%, 80%, 70%, 60%, 50%
100%, 90%, 80%, 70%, 60%, 50%
Off, 5-45mph/5mph step,
10-70kmph/10kmph step
Default: US/CAN: 15mph; AUS/NZ: 40kmph
Off, 65-105mph/5mph step,
100-170kmph/10kmph step
Set
The default menu settings are denoted in bold.

PAGE 8
Menu Submenu
Ka3 Mode
Brightness
Idle Mode
Ka7 Mode
Ka5 Mode
Ka9 Mode
TSA Filter
Ka6 Mode
Ka Filter
Ka4 Mode
Display Color
Alert Ka Color
Alert K Color
Alert Laser
Color
Alert MRCD
Color
Alert X Color
Sub Mode
Ka8 Mode
K Filter
Option Menu
On, Off
Auto, Bright, Dim, Dimmer
Time, Scan, Smart Dark, Dark
On, Off
On, Off
On, Off
On, Off
On, Off
On, Off
On, Off
Red, Blue, White, Gray, Pink,
Purple, Green, Amber
Red, Blue, White, Gray, Pink,
Purple, Green, Amber
Red, Blue, White, Gray, Pink,
Purple, Green, Amber
Red, Blue, White, Gray, Pink,
Purple, Green, Amber
Red, Blue, White, Gray, Pink,
Purple, Green, Amber
Red, Blue, White, Gray, Pink,
Purple, Green, Amber
Speed, Compass, Speed +
Compass, Altitude, Off
On, Off
On, Off
Band Setting
(cont.)
Display
Setting
Ka1 Mode
Ka2 Mode
On, Off
On, Off

PAGE 9
Menu Submenu Option Menu
Laser Tone
Ka Tone
1, 2, 3, 4, 5, 6, 7, 8, 9, 10
1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Tone
X Tone
MRCD Tone
GPS Signal
Announce
Auto Lockout
Area
Red Light
Camera
Speed
Camera
Red & Speed
Camera
Delete All
User Points?
GPS Alert
Distance
Delete All
Lockouts?
RLC Auto
Mute
Delete
All Auto
Lockouts?
K Tone
GPS
Auto Lockout
Pin Home
1, 2, 3, 4, 5, 6, 7, 8, 9, 10
1, 2, 3, 4, 5, 6, 7, 8, 9, 10
On, Off
No Limit, 50 mile, 100 mile, 150
mile, 200 mile
On, Off
On, Off
On, Off
Reset?
Auto, Short, Medium, Long
Reset?
Off, 55/70mph/5mph step,
90-110kmph/10kmph step
Reset?
1, 2, 3, 4, 5, 6, 7, 8, 9, 10
On, Off
On, Off
Set (no default setting)
GPS

PAGE 10
Region
Volume Level
Unit
DST
Auto Mute
GMT
Auto Power
Off
Time 12/24
Auto Mute
Start
Factory Reset
Mode
Auto Mute
Vol
Firmware
Version Mode
Database
Version Mode
US, Canada, AUS/NZ
0, 1, 2, 3, 4, 5, 6, 7, 8, 9
English (mph), Metric (kmph)
On, Off
On, Off
-12 to 0 to +12 / 1 step
Off, 15 min, 30 min
12 hr, 24 hr
1 sec, 2 sec, 3 sec
Reset?
50%, 40%, 30%, 20%, 10%, 0%
Vx.xx
xx.xx.xx
Unit
Etc
Default: US/CAN: -5 ; AUS/NZ: +12
Default: US: english; CAN/AUS/NZ: metric
Speed Unit
Speed Unit can be changed mph or km/h in the Menu
1. Set mph : Speed : mph, Distance and height : feet
2. Set km/h : Speed : km/h, Distance and height :
meter

PAGE 11
Unit of Measure for Quiet Ride & Speed Limit
1. mph to km/h
1.1 Low Speed Mute
5 mph to 10 km/h
10 mph to 20 km/h
15 mph to 20 km/h
20 mph to 30 km/h
25 mph to 40 km/h
30 mph to 50 km/h
35 mph to 60 km/h
40 mph to 60 km/h
45 mph to 70 km/h
1.2 Over Speed Warning
65 mph to 100 km/h
70 mph to 110 km/h
75 mph to 120 km/h
80 mph to 130 km/h
85 mph to 140 km/h
90 mph to 140 km/h
95 mph to 150 km/h
100 mph to 160 km/h
105 mph to 170 km/h
1.3 RLC Mute
55 mph to 90 km/h
60 mph to 100 km/h
65 mph to 100 km/h
70 mph to 110 km/h
2. km/h to mph
2.1 Low Speed Mute
10 km/h to 5 mph
20 km/h to 10 mph
30 km/h to 20 mph
40 km/h to 25 mph
50 km/h to 30 mph
60 km/h to 35 mph
70 km/h to 45 mph
2.2 Over Speed Warning
100 km/h to 65 mph
110 km/h to 70 mph
120 km/h to 75 mph
130 km/h to 80 mph
140 km/h to 85 mph
150 km/h to 95 mph
160 km/h to 100 mph
170 km/h to 105 mph
2.3 RLC Mute
90 km/h to 55 mph
100 km/h to 60 mph
110 km/h to 70 mph

PAGE 12
Idle Display
Set the standby mode.
1. Scan Display: A moving red scan graph is displayed.
2. Time Display: The current time is displayed. User
can select 12hr or 24hr in the menu.
3. Smart Dark, Dark: Shows only one dot on the right
bottom side. Smart dark only operates when the
button clicks and it alerts. In Smart Dark mode, the
display turns on and the brightness level is changed
to the brightness setting in the brightness mode
when a button is pressed or an alert goes off.
Sub Display
Set the display information that is located on the upper
left side.
1. Speed: Shows your current speed.
2. Speed + Compass: Shows your current speed and
direction.
3. Compass: Shows your current direction.
4. Altitude: Shows your current altitude.
5. Off: Displays nothing.
Alerts
1. Laser Alert: The display will show "Laser" to alert
you of a Laser threat.
2. MRCD Alert: The display will show "MRCD" to alert
you of a MRCD threat.
3. Radar Alert: The display will show the radar band
and frequency to alert you of a radar threat.
4. Threat Display: The display will show the radar
band and frequency to alert you of a radar threat.
5. App Connected by Bluetooth: The display will
show a bluetooth symbol in the left bottom corner
6. Lockout Display: in the right bottom corner,
"Lockout" will show in green while within the radius
DISPLAYS

PAGE 13
of the lockout.
7. Auto Lockout: in the right bottom corner, "Auto
Lockout" will show in green while within the radius
of the lockout.
8. K 24.199 Lockout Display: in the right bottom
corner, "K L/O 24.199" will show in green while
within the radius of the false alert.
9. Speed Camera Alert: The alert will show "Speed
Camera" as well as the distance to the threat, and
voice will alert "Speed Camera Ahead."
10. Red Light Camera Alert: The alert will show "Red
Light Camera" as well as the distance to the threat,
and voice will alert "Red Light Camera Ahead."
11. Red Light & Speed Camera Alert: The alert will
show "Red Light Camera" as well as the distance to
the threat, and voice will alert "Red Light and Speed
Camera Ahead."
12. POI Limit Speed Alert: The voice will alert
“Attention reduce speed" with a sound effect and
the Display shows “Over Speed.” The Left Display
shows the current speed if the Left Display setting
is “Speed.” POI Limit Speed Alarm has higher priority
than Laser/Radar alarm.
13. Over Speed Warning Alert: The voice will alert
“Attention reduce speed” with a sound effect and
the Right Display shows “Over Speed.” POI Limit
Speed Alarm has higher priority than Laser/Radar
alarm.

PAGE 14
Low Speed Mute
If the current speed is slower than the speed in Low
Speed Mute which user set, Speed Camera, User Point,
Auto Lockout, X, K, POI Limit Speed Voice, Over Speed
Warning Voice will be Mute.
RLC Auto Mute
If the current speed is slower than the speed in RLC
Auto Mute which user set, Speed Camera, the alert for
Red Light Camera, Red & Speed Camera will be Mute.
Lockouts
The user can mute the frequency at the specific location
during alarming X, K band. Then, if the same frequency
(X, K band: +/-10MHz) is detected at the same location,
X and K alarm will be muted and the display will show
‘Lockout’ in green at the lower right corner until DS1
goes out of the 500m radius.
Lockout Range
Entry: approximately 450m
Exit: approximately 500m
If both Lockout and Auto Lockout are detected at the
same time, the display will show "Lockout."
To save a lockout
1. When X or K alerts, press [MUTE] to mute the voice
and beep alerts.
2. Press [MUTE] again to store the current location
and the frequency of the false alert. The display and
voice will say "Lockout Stored."
3. If the lockout is saved properly, the display will

PAGE 15
show "Lockout" in green in the lower right corner
until the DS1 is out of the 500m radius.
4. A maximum of 5,000 lockout points can be saved.
If the user wants to save an additional Lockout, the
oldest lockout will be deleted and the new lockout
will be saved.
To Delete a Lockout
1. When the DS1 gets a lockout signal, you will see
"LOCKOUT" in green in the bottom right corner
2. While "LOCKOUT is still displayed, press [MUTE].
The voice and display will say "Delete Lockout?"
3. Press [MUTE] again to delete. The voice and display
will confirm that the lockout was deleted.
DS1 does not save the Lockout due to the problem of
receving GPS location data, the voice says "GPS Error."
If GPS is unfixed, DS1 get Mute Off.
To Delete All Lockouts, select "Delete All Lockouts" in
the menu.
User Point Alarm
When User point is detected, the voice announces
(“User Point Ahead”) and shows User POI display.
User Point Alarm Range
- Entry : approximately 450m
- Exit : approximately 500m
To Save a User Point
Press [MUTE] for 2 seconds to save a User Point. When
a POI alert is detected, User point can not be saved. The
user can save a maximum of 5,000 points.

PAGE 16
To Delete a User Point
During a POI Point alert, press [MUTE] for over 1 second
to delete User point.
Delete All User Points
If the user selects “Delete All User Point?” in the menu,
all User Points will be deleted.
POI Point Delete (Speed & Red light
Camera)
During a POI Point alert, press [MUTE] for over 1 second
to delete User point.
Auto Lockout
If the same signal (X Band : +-10Mhz, K Band : +-10Mhz)
is detected at the same location three times( 1st + 2nd +
3rd), DS1 will automatically lock the signal out as a false
alert. Once a signal is saved in Auto mute memory (the
1st counting) , DS1 will not save the same signal for 8
hours even though it is detected again, which means it
takes at least 16 hours( 1st + 2nd + 3rd) to automatically
lock a signal out. The interval of 8 hours is to avoid
saving too many signals in Auto mute memory.
The user can set the radius using Auto Lockout and Pin
Home.
If both Lockout and Auto Lockout are detected at the
same time, the display shows "Lockout" as a priority.
Auto Lockout Range
- Entry : approximately 450m
- Exit : approximately 500m

PAGE 17
Delete All Auto Lockout
If choose “Delete All Auto Lockout?” in the menu, all
Auto Lockout will be deleted
K Lockout 24.199
DS1 mute the alert voice when K Band within the range
of 24.199 +- 0.005MH detects. Display turns gray-out
and shows “K L/O 24.199” in green.
City Mode
1. Auto
DS1 sets Highway or City automatically depending
on the vehicle speed. Auto mode is not activated
when GPS is disconnected. If vehicle speed is over
50MPH, it sets Highway and if vehicle speed is
under 50MPH, DS1 sets City Mode.
2. Custom
User can set the sensitivity of each band (100 to
50%)
Bluetooth Mode
1. If BT on, the user can operate using the exclusive
App.
2. The user can update F/W on DS1 unit using BT.
K Narrow/Wide
1. K Narrow: K Band : 24.080 ~ 24.200GHz
2. K Wide : All K Band : 24.050 ~ 24.250GHz
3. NZ K Narrow : K Band 23.950 ~ 24.130GHz, This
option is shown only when the menu sets as AUS/
NZ in Region Menu.
Ka Narrow/ Wide / Segmentation
1. Ka Narrow: Ka Band – 33.8Ghz +-99Mhz,35.5Ghz+-

PAGE 18
99Mhz, 34.6Ghz~34.85Ghz
2. Ka Wide: All Ka band: 33.399~35.700GHz
3. Ka Segmentation: This feature allows users to
select, from 9 filtered settings, a customized sweep
of Ka band.
a. Ka 1 : 33.399 ~ 33.705 Ghz On<->Off
b. Ka 2 : 33.705 ~ 33.903 Ghz On<->Off
c. Ka 3 : 33.903 ~ 34.191 Ghz On<->Off
d. Ka 4 : 34.191 ~ 34.587 Ghz On<->Off
e. Ka 5 : 34.587 ~ 34.803 Ghz On<->Off
f. Ka 6 : 34.803 ~ 35.163 Ghz On<->Off
g. Ka 7 : 35.163 ~ 35.379 Ghz On<->Off
h. Ka 8 : 35.379 ~ 35.613 Ghz On<->Off
i. Ka 9 : 35.613 ~ 35.701 Ghz On<->Off
Threat Display
Its shows Three radar signal (up to 3radar bands) being
detected at the same time.
*Display priority
1. Laser
2. MRCD
3. Ka
4. X, K
Bogey Tone
If the other frequency is detected during X, K, Ka Band
Alert, DS1 sounds the Bogey Tone and then the band
alert continues.
Auto Mute Mode
Auto Mute Mode : Selectable (On/Off)
1. When Radar (X, K and Ka, POP) alert starts, DS1
alerts for the time which set in Auto Mute Start

PAGE 19
Option (1 sec, 2 sec, 3 sec). After DS1 gets Auto
Mute On, DS1 volume level sounds reduced by Auto
Mute Vol option percentage.
2. Auto Mute ends 10 seconds after the alarm ends. If
the same radar is detected within 10 seconds, the
unit keeps Auto Mute On.
3. Auto Mute is not applicable to Laser alert.
4. If the current volume level is 0, DS1 keeps the
current volume level.
Auto Dim Mode
DS1 has a light sensor to determine when the detector
should use the Bright settings (daylight) and when it
should use the Dim settings (nighttime). The brightness
set Bright or Dimmer depending on the brightness of
surroundings.
Auto Power Mode
1. If DS1 speed is 0 or DS1 cannot receive GPS location
data for the set time (15 min, 30 min), DS1 counts
Auto Power Off alarm about 10seconds and then
power off.
2. The Auto Power alarm stops if the user presses any
button during the Auto Power off alarm
3. The Brightness sets BRIGHT automatically.
(Auto Power Off Display)
Power Cord Alert LED
1. Power Cord Alert LED turns on when the power
turns on.
2. Power Cord Alert LED blinks when Laser or Radar (X,

PAGE 20
K, Ka) alarms
3. Power Cord Alert LED blinks slowly when the speed
of Laser or Radar (X, K, Ka) alarms beeping sound is
slow down and it blinks fast when the speed of the
Laser or Radar alarm beeping sound increases.
Power Cord Mute Button
Power Cord Mute button operation is the same as those
of DS1 unit.
Software Update
DS1 can be updated using both PC and BT.